Search results

This paper aims to analyse the influence of cooperation on the degree of novelty of technological innovations introduced by industrial firms in Argentina. This influence is analysed from three perspectives: cooperation by partner type [business partners or scientific and technological centres (S&T) partners]; cooperation by number of partner types, from no cooperation to cooperation with two partner types; and cooperation by goals pursued by firms.

The data come from one of the last national innovation surveys conducted in Argentina. The study controls for endogeneity, using instrumental variable procedures within the conditional mixed-process (CMP) framework.

The main result is the influence of cooperation with universities and S&T centres on the introduction of more novel innovations, which was found both in estimations with and without endogeneity correction. This influence was verified for more complex goals (R&D, technology transfer and industrial design and engineering) as well as for less complex ones (tests and trials, human resources training, quality management and certification). Business cooperation seems to impact only on a lower degree of novelty for more complex goals. The increase in the number of partners that the firm cooperates with, from no cooperation to joint cooperation with two partner types, influences more novel innovations.

Limitations and proposals for future research are discussed at the end of the study.

The results of this study contrast with the high propensity to cooperate with business partners shown by firms in Argentina and other Latin American countries. Therefore, this paper may help formulate more effective policies to promote cooperation conducive to firm innovation performance. Limitations and proposals for future research are discussed at the end of the study.

Although there is empirical evidence on this topic for developed countries, firm-level studies on cooperation and degree of novelty are scarce for Latin America. In addition, this paper analyses cooperation not only by type of partner but also by type of goal. This study attempted to control for endogeneity by using instrumental variables within the CMP framework.

The purpose of this study is to construct a comprehensive review on family businesses in the tourism industry since glocalization and small businesses comprise most of the industry.

This is a conceptual paper which utilizes qualitative research methods. Bibliometric analysis is applied to the selected 35 articles from specific databases which include not only the general tourism industry but also subsectors of airline, hospitality, restaurant, etc. Articles in this study fixate on the family businesses within the tourism industry.

In total, 35 articles are found with the keywords “family business and tourism”, “family business and hospitality and hotels”, “family business and restaurant” and “family business and airline”. Though the family business studies focus on hospitality, tourism and restaurants as F&B, there is a research gap in the subsectors like rent-a-car companies, travel agencies and tour operators and recreation facilities. Overall qualitative research design is preferred, but majority of the authors’ focus is on business development, profit, performance and succession. For further studies, quantitative analysis on research gap areas are recommended.

The most general limitation is that only specific selected databases are used for the data gathering process such as double reviewed indexed journals published within Web of Science, Emerald, Elton B. Stephens Company (EBSCO) and Elsevier databases from the period of 1970s. Some other databases and some different periods may be considered as well as different keywords for other research. Secondly, few studies have analyzed quantitative data, since the specific nature of the family business dynamics require qualitative data. As a suggestion, not only qualitative analysis but also mixed methods may also be studied since the literature lacks the studies conducted with these methodologies.

The study contributes to the existing literature by providing a comprehensive review on hospitality and tourism family business management emphasizing the research gap on subsector application areas.

The purpose of this paper is to explore the possibilities of prioritizing tasks, actual sharing of libraries, collaboration policies and the directions via quantifying the relative importance of services for each value based on users’ perceptions observed from in-depth analysis of the investigation results. Through this, the study expects that libraries will provide high – level the sharing economy services, reflecting users’ needs.

This study surveyed public library users across the country have through the survey method and Analytic Hierarchy Process (AHP) method to examine the perceptions of users on the roles of libraries in the sharing economy’s environment to deduce the directions and priorities to activate the roles and functions of libraries in the era of the sharing economy.

The research results are as follow: first, public library users’ awareness of the concept of the sharing economy was low, but they observed a relation between the two concepts after understanding the concept of the sharing economy. Second, The users’ personal characteristics were observed to mostly affect knowledge information service, experience talent sharing, material sharing and space sharing. Lastly, the study sought to identify the relative importance (preference) of various library services which pursue the value of the sharing economy through AHP analysis method. The values of the sharing economy were preferred in the order of social>economic>technical>relational values which can be enumerated to convenience>knowledge>space>education>contents>new technology>experienced talent>object>network.

This study has a great significance in that it analyzed actual library users’ perceptions on the concept of the sharing economy and the functions and roles of libraries in the era of the sharing economy from a multifaceted angle. In addition, this study carries an important meaning as it provided an opportunity to vitalize libraries and explored the measures to actualize the roles of libraries in tandem with the environment of the sharing economy by recognizing the values of libraries based on the new concepts and values of the sharing economy and presenting the functions and roles of the libraries from the aspects of the sharing economy.

Eventscape is widely recognised as having played an important role in the image of wine events; however, research on this topic is scarce, with only a few studies examining the image of a wine tourism event. To date, no studies have examined eventscape and attitudinal variables of a wine event together, thus indicating a gap in the research. Further research to gain a deeper understanding of the role these factors play is needed; thus, this paper aims to explore the relationships between event image, eventscape, satisfaction and loyalty in wine events.

A structured questionnaire was chosen for data collection, with a final sample of 117 valid responses. Qualitative data was analysed by means of content analysis. Univariate and bivariate statistical analyses were performed to analyse eventscape attributes and explore its relationship with event image, satisfaction and loyalty.

The paper highlights that perceptions of eventscape are intrinsically related to perceived event image and reveal a statistically significant relationship between these two elements. Results show the importance of the social dimension in the image perception of a wine event and point to conviviality as the main element. This study also reveals a relationship between perceived event image and attitudinal variables and suggests that having a positive image of the event positively influences levels of satisfaction, which are higher, and willingness to participate in future editions of the event. Findings also reveal a relationship between event image and loyalty.

Wine-related events are undergoing significant developments, creating a need for competitive strategies to develop wine tourism and vineyards in certain regions. Research in this field is scarce to date; therefore, this paper adds to the literature by the studying consumer behaviour of attendees at wine events.

The purpose of this paper is to propose a solution procedure to minimize/eliminate voiding and spattering defects in the assembly of 0201 chip components with micro via‐in pads and 95 wt.%Sn‐5 wt.%Sb solder alloy.

In total, four different micro via‐in pad designs were compared (via‐hole opening size): ultra small via‐in pads (d: 10 μm), small via‐in pads (d: 20 μm), and large via‐in pads (d: 60 μm), as well as designs with no via‐in pads and capped via‐in pads. Two process variables were also evaluated for the goal of achieving a high‐yield assembly solution in micro via‐in pad and lead‐free solder systems. Potential factors, such as the preheat conditions of the reflow profile and stencil aperture size, which might affect voiding and spattering in solder joints with micro via‐in pad, were investigated. Solder voiding frequency and size were also determined from X‐ray inspection and sample cross‐section analysis.

The results indicated that larger via‐holes were seen to create bigger voiding than smaller via‐holes. For smaller via‐holes, spattering is a greater problem than voiding in solder joints. Ultra small via‐in pads generated higher spattering compared to no via‐in pads and capped via‐in pads. Capped via‐in pads exhibited the best results in preventing voiding and flux spattering, and provided a wide process window for the selection of process parameters. It is also indicated that spattering was found to rapidly reduced with both increasing stencil opening size and use of reflow profile with long‐preheat conditions.

The findings provide certain process guidelines for surface‐mount assembly with via‐in pad substrate design. The strategy is to prevent voiding and spattering by adopting capped via‐in pads, if possible, when applying micro via with the 95 wt.%Sn‐5 wt.%Sb solder alloy system.

Exploiting a novel measure of innovation, the authors investigate whether independent directors improve innovation efficiency. This novel measure of innovation captures the extent to which the firm generates revenue from its research & development and is, therefore, more economically meaningful. The authors also use a text-based measure of innovation.

The authors rely on a quasi-natural experiment based on the passage of the Sarbanes-Oxley Act of 2002 that compelled certain firms to raise board independence. The difference-in-difference analysis is far less vulnerable to endogeneity and is more likely to show a causal influence, rather than a mere association.

The results show that more independent directors improve innovation efficiency significantly. Specifically, firms forced to raise board independence experienced a much higher increase in innovation than those not required to change their board composition. The authors also explore another novel measure of innovation, a text-based metric of innovation.

The research is original in several ways. First, the authors take advantage of an exogenous regulatory shock as a quasi-natural experiment. This approach is far less susceptible to endogeneity. Second, the authors use a novel measure of innovation efficiency, i.e. research quotient, which is more economically meaningful. Finally, the authors use a unique measure of innovation derived from powerful textual analysis.

Korea is a highly centralized country where most administrative functions are carried out by the central government in Seoul. Increasingly, however, local governments have been given greater autonomy in their operations. This chapter examines how the ideal values of political decentralization have interacted with the country’s local bureaucracy, which inherently has dark side in itself. The focus is on how local government employees have contributed, or responded, to the democratic change of their communities, particularly since the 1980s. At the outset, the experiences of Korea’s decentralization and local autonomy are briefly reviewed. It is then examined how the bureaucrats have played in the process of democratization in terms of three features: bureaucratic power, scope, and culture. Institutionalizing competitive local bureaucracy contributed to reduce the disparity between capital regions (Seoul and its surrounded area) and noncapital regions (locals). Empowering local bureaucracy to allow own localized decision-making process was the first move of Korean governance.

Additive Manufacturing (AM) conventionally necessitates an intermediary slicing procedure using the standard tessellation language (STL) data, which can be computationally burdensome, especially for intricate microcellular architectures. This study aims to propose a direct slicing method tailored for digital light processing-type AM processes for the efficient generation of slicing data for microcellular structures.

The authors proposed a direct slicing method designed for microcellular structures, encompassing micro-lattice and triply periodic minimal surface (TPMS) structures. The sliced data of these structures were represented mathematically and then convert into 2D monochromatic images, bypassing the time-consuming slicing procedures required by 3D STL data. The efficiency of the proposed method was validated through data preparations for lattice-based nasopharyngeal swabs and TPMS-based ellipsoid components. Furthermore, its adaptability was highlighted by incorporating 2D images of additional features, eliminating the requirement for complex 3D Boolean operations.

The direct slicing method offered significant benefits upon implementation for microcellular structures. For lattice-based nasopharyngeal swabs, it reduced data size by a factor of 1/300 and data preparation time by a factor of 1/8. Similarly, for TPMS-based ellipsoid components, it reduced data size by a factor of 1/60 and preparation time by a factor of 1/16.

The direct slicing method allows for bypasses the computational burdens associated with traditional indirect slicing from 3D STL data, by directly translating complex cellular structures into 2D sliced images. This method not only reduces data volume and processing time significantly but also demonstrates the versatility of sliced data preparation by integrating supplementary features using 2D operations.

Increasing income inequality particularly since the economic crisis of 1997 has called attention to the issue of growing educational inequality in South Korea. Although much recent research has been directed at understanding the socioeconomic gap in academic achievement, few studies have empirically examined how this gap has changed over time during the past decade in South Korea. Using nationally representative data for the most recent three cohorts (1999, 2003, and 2007) of eighth-grade South Korean students from Trends in International Mathematics and Science Study (TIMSS), this study examines trends in the relationship between socioeconomic background and student achievement. The eighth-grade TIMSS data demonstrate that the influence of socioeconomic background on student achievement has increased over time during the past decade, offering evidence of growing educational inequality in South Korea. Various factors may contribute to higher educational inequality, including the widening income gap and recent educational transformations geared toward school choice and tracking.

This study investigates the mediating effect of perceived value in the relationship between team identification and purchase intention towards licensed apparel within two different price settings (market price and 40% above market price). Considering adaptation level theory, cognitive dissonance theory and dual information processing, it is hypothesised that team identification will directly influence purchase intention when the price of a product decreases. Two models (partial mediation and full mediation) were constructed in each price setting and tested using structural equation modelling (SEM). The results indicate that the partial mediation model better fits the data for the 70,000 Won setting and the full mediation model was a better fit for the 90,000 Won setting.