Search results

One of the most contested and anticipated research issues is the acceptability of using recycled aggregates instead of fresh aggregates. This study aims to look at the possibility of replacing fresh aggregates with 15%, 30%, 60% and 100% recycled aggregates.

The research is divided into two stages. The compressive, split tensile, flexural and bond strength of the various mixes were examined in the first phase using untreated recycled concrete aggregates (RCA). The second phase entails chemically treating RCA with a 10% 0.1 M sodium metasilicate solution to evaluate differences in strength, indicating the success of the treatment performed. Microstructural experiments such as scanning electron microscopy and X-ray diffraction were also conducted to evaluate the formation of interfacial transition zone (ITZ) in treated and untreated RCA specimens.

The observed findings reveal a decrease in concrete strength with increasing RCA concentration; however, when treated RCA was used, the strengths increased significantly when compared to untreated samples. The findings also include curves indicating the correlation between compressive strength and other mechanical strength parameters for an optimum mix of concrete prepared with 30% RCA replacement.

The study through its novel approach, demonstrates the effect of pretreatment of RCA in the absence of any standardized chemical treatment methodology and presents significant potential in minimizing reliance on fresh aggregates used in concrete, lowering building costs and promoting the use of waste materials in construction.

The paper develops a model for enhancing R&D productivity for Indian public funded laboratories. The paper utilizes the productivity data of five Council of Scientific and Industrial Research (CSIR) laboratories for analysis and to form the constructs of the model.

The weighted average method was employed for analyzing the rankings of survey respondents pertaining to the significant measures enhancing R&D involvement of researchers and significant non-R&D jobs. The authors have proposed a model of productivity. Various individual, organizational and environmental constructs related to the researchers working in the CSIR laboratories have been outlined that can enhance R&D productivity of researchers in Indian R&D laboratories. Partial Least Squares-Structural Equation Modeling (PLS-SEM) was used to find the predictability of the productivity model.

The organizational factors have a crucial role in enhancing the R&D outputs of CSIR laboratories. The R&D productivity of researchers can be improved through implementing the constructs of the proposed model of productivity.

The R&D productivity model can be adapted by the R&D laboratories to enhance researchers’ R&D involvement, increased R&D outputs and achieving self-sustenance in long run.

The R&D laboratories can initiate exercises to explore the most relevant factors and measures to enhance R&D productivity of their researchers. The constructs of the model can function as a guideline to introduce the most preferable research policies in the laboratory for overall mutual growth of laboratory and the researchers.

Hardly any studies have been found that have focused on finding the measures of enhancing R&D involvement of researchers and the influence of significant time-intensive jobs on researchers’ productivity.

This paper aims to investigate the impact of political stability on corruption by drawing upon a sample encompassing both developed and developing European and Asian countries.

The dataset, sourced from the Refinitiv database, spans from July 2014 to May 2022. Panel data techniques, specifically pooled estimation and dynamic panel data [generalized method of moments (GMM)] are employed. The analysis encompasses both fixed and random effects models to capture country-specific cross-sectional effects. To validate our findings, we perform a robustness test by including in the investigation four control variables, namely poverty, type of governance, economic freedom and inflation. To test heterogeneity, the dataset is further divided into two distinct subsamples based on the countries’ locations.

Empirical findings substantiate that political stability (viewed as the risk of government destabilization) has a positive and significant impact on corruption in all analyzed samples of European and Asian countries, though some differences are observed in various subsamples. When we take into account the control variables, these analysis results are robust.

This research provided a panel data analysis with GMM, while other empirical methodologies could also be used, like the difference-in-difference approach. However, our results should be validated by extending the time and the sample to a worldwide sample and using alternative measures of corruption and political stability. Moreover, our focus was on a linear and unidirectional relationship between the considered variables, but it would be interesting to test in our further research a non-linear and bidirectional correlation between them. Furthermore, we have introduced in the robustness test only four economic variables, but to consolidate our findings, we plan to include socioeconomic and demographic variables in future studies.

These outcomes imply that authorities should be aware of the necessity of implementing anti-corruption policies designed to establish effective agencies and enforcement structures for combating systemic corruption, to improve the political environment and the quality of institutions and to apply coherent economic strategies to accelerate economic growth because higher political stability and sustainable development determine a decrease in levels of corruption.

At the microeconomic level, the survival of organizations may be in danger from new types of corruption and money laundering. Therefore, in order to prevent financial harm, the top businesses worldwide should respond to instances of corruption through strengthened supervisory procedures. This calls for the creation of a mechanism inside the code of conduct where correct reporting of suspected situations of corruption would have a prompt procedure to be notified of. To avoid corruption in operational procedures, national plans and policies should be developed by government officials, executives and legislators on a national level, as well as by senior management and the board of directors on an organizational level. This might lower organizations' extra corruption-related expenses, assure economic growth and improve global welfare.

A novel feature of our research resides in its broad examination of a sizable sample of European and Asian countries regarding the nexus between corruption and political stability. The paper also investigates a less explored topic in economic literature, namely the impact of political stability on corruption. Furthermore, the study depicts policy recommendations, outlining effective and reasonable measures aimed at improving the political landscape and combating corruption.

This research aims to explore the significance of cooperative efforts in promoting financial participation to enhance the socio-economic empowerment of the rural Muslims.

The primary study with a structured questionnaire has been conducted taking a sample of 398 rural Muslim respondents from various rural regions of south India through proportionate stratified sampling techniques. Regression analysis, paired sample t-test and structural equation modelling (SEM) through statistical package for social sciences (SPSS) 26 & SPSS analysis of moment structures (AMOS) 23 software have been implemented to test the relationship.

The research outcome demonstrated a remarkable difference in the rural Muslim’s socio-economic conditions before and after availing the loans from cooperatives. Consequently, an extension of cooperative efforts widens the scope of financial participation which again has positively enhanced rural Muslim’s socio-economic empowerment.

This study will help various policymakers, academicians and communities to take necessary action for the upliftment of a particular community. The research further adds on to the existing research on the need and importance of cooperative efforts as an alternative finance for marginalised community in developing and emerging countries.

The result of this study is only confined to south India, posing a limitation for the study. Apart from the geographical restriction, the study solemnly covers the rural Muslim community extracting other sections of the society. Hence, for more generalisable pictures of the current results, further research is recommended from other stakeholders’ perspectives.

This study aims at investigating two-dimensional laminar flow of power-law fluids around three unconfined side-by-side cylinders.

The numerical study is performed by solving the governing (continuity and momentum) equations using a finite volume-based code ANSYS Fluent. The numerical results have been presented for different combinations of the governing dimensionless parameters (dimensionless spacing, 1.2 = L = 4; Reynolds number, 0.1 = Re = 100; power-law index, 0.2 = n = 1.8). The dependence of the kinematic and macroscopic characteristics of the flow such as streamline patterns, distribution of the surface pressure coefficient, total drag coefficient with its components (pressure and friction) and total lift coefficient on these dimensionless parameters has been discussed in detail.

It is found that the separation of the flow and the apparition of the wake region accelerate as the dimensionless spacing decreases, the number of the cylinder increases and/or the fluid behavior moves from shear-thinning to Newtonian then to shear-thickening behavior. In addition, the distribution of the pressure coefficient on the surface of the cylinders presents a complex dependence on the fluid behavior index and Reynolds number when the dimensionless spacing between two adjacent cylinders is varied. At low Reynolds numbers, the drag coefficient of shear-thinning fluids is stronger than that of Newtonian fluids; this tendency decreases progressively with increasing of Re until a critical value; beyond the critical Re, the opposite trend is observed. The lift coefficient of the middle cylinder is null, whereas, the exterior cylinders experience opposite lift coefficients, which show a complex dependence on the dimensionless spacing, the Reynolds number and the power-law index.

The flow over bluff bodies is a practical engineering problem. In the literature, it can be seen that the previous studies on non-Newtonian fluids are limited to the flow over one or two cylinders (effect of an odd number of cylinders on each other). Besides that, the available results concerning the flow of Newtonian fluids over three cylinders are limited to the high Reynolds numbers region only. However, this work treats the flow of non-Newtonian power-law fluids past three circular cylinders in side-by-side arrangements under a wide range of Re. The outcome of the present study demonstrates that the augmentation of the geometry complexity to three cylinders (effect of pair surrounding cylinders on the surrounded ones in what concerns Von Karman Street phenomenon) causes a drastic change in the flow patterns and in the macroscopic characteristics. The present results may be used to predict the flow behavior around multiple side-by-side cylinders.

The purpose of this paper is to design a cascaded Multilevel inverter with reduce number of switches for high power applications. This paper came up with an innovative three-phase multilevel inverter (MLI) topology, which is a cascaded structure based on classical three-legged voltage source inverter (VSI) bridges as an individual module. The prominent advantage of this topology is that it requires only one direct current (DC) link system. The main characteristic of it is that a higher number of voltage levels can be achieved with considerably a smaller number of semiconductor switches, which improves the reliability, power quality, cost and size of the system significantly.

The individual modules are cascaded through three-phase transformers to provide higher voltage at the output with the higher number of voltage levels. In this work, the phase-shifted pulse width modulation technique is implemented to verify the result.

The proposed topology is compared with three-phase cascaded H-bridge MLI (CHB-MLI) and a modified CHB-MLI topology and found better in many aspects. The proposed MLI can produce a higher number of voltage levels with fewer semiconductor switches and associated triggering circuitry. As the device count in the proposed MLI is less compared to other MLI discussed, it tends to have less switching and conduction loss which increases the efficiency and reliability. As the number of level increases, the voltage profile and the total harmonic distortion of the proposed MLI improves.

This is a transformer-based modular cascaded MLI, which is based on classical VSI bridges. Here in this topology, a single module provides all three phases. So, a single string of cascaded modules is enough for three-phase multilevel voltage generation.

Maintaining the turbine blade’s temperature within the safety limit is challenging in high-pressure turbines. This paper aims to numerically present the conjugate heat transfer analysis of a novel approach to mini-channel embedded film-cooled flat plate.

Numerical simulations were performed at a steady state using SST k – ω turbulence model. Impingement and film cooling are classical approaches generally adopted for turbine blade analysis. The existing film cooling techniques were compared with the proposed design, where a mini-channel was constructed inside the solid plate. The impact of the blowing ratio (M), Biot number (Bi) and temperature ratio (TR) on overall cooling performance was also studied.

Overall cooling effectiveness was always shown to be higher for mini-channel embedded film-cooled plates. The effectiveness increases with increasing the blowing ratio from M = 0.3 to 0.7, then decreases with increasing blowing ratio (M = 1 and 1.4) due to lift-off conditions. The mini-channel embedded plate resulted in an approximately 21% increase in area-weighted average overall effectiveness at a blowing ratio of 0.7 and Bi = 1.605. The lower uniform temperature was also found for all blowing ratios at a low Biot number, where conduction heat transfer significantly impacts total cooling effectiveness.

To the best of the authors’ knowledge, this study presents a novel approach to improve the cooling performances of a film-cooled flat plate with better cooling uniformity by using embedded mini-channels. Despite the widespread application of microchannels and mini-channels in thermal and fluid flow analysis, the application of mini-channels for blade cooling is not explored in detail.

Motivated by the real-world practice of the thriving e-commerce, manufacturers are transcending traditional boundaries of merely producing and selling directly by implementing encroachment. Concurrently, supply chain (SC) members who overlook the corporate social responsibility (CSR) sharing will be left behind, which is closely linked to their profits. This paper aims to investigate a better way to share CSR under the scenarios of manufacturer encroachment and no-encroachment.

This paper constructs game-theoretic models in a SC consisting of a manufacturer (M) and a retailer (R), where the manufacturer can sell products by retailing, and may sell directly by implicating encroachment. The manufacturer and retailer jointly consider whether to share CSR and the proportion of it by taking consumer surplus into account. Furthermore, equilibriums for each model are derived using backward induction. Then, the authors analyse the impact of CSR sharing proportion and compare the equilibrium outcomes under different scenarios. Finally, the numerical analyses are presented to verify the results.

Several interesting results are found in this paper. First, the retailer shares more CSR can benefit SC members and social welfare when the manufacturer does not implement encroachment. However, the results may change which is decided by the unit cost of encroachment when the manufacturer does so. Second, the proportion of CSR shared by manufacturer and the unit cost of encroachment has an interactive impact on equilibrium outcomes. Finally, both manufacturer encroachment and SC members share CSR may be the best for the perspective of SC members and consumers.

Based on the analytical results, this paper provides novel managerial implications to assist manufacturer and retailer in determining the optimal strategies for CSR sharing and encroachment. Furthermore, the appropriate proportion of CSR shared by manufacturer and the unit cost of encroachment may let manufacturer, retailer and consumer surplus achieve a win-win-win situation.

To the best of the authors’ knowledge, this paper is the first attempt to explore the strategy of CSR sharing under the scenarios of manufacturer encroachment and no-encroachment.

The importance of consumer experience in service industries, particularly healthcare, is widely acknowledged as it captures the intricacies of quality management. In tandem with the emerging research trends that evaluate service excellence through user experience, this study renders a performance analysis of the dimensions of consumer experience that individually or collectively shape healthcare consumers’ perceptions of service quality.

A cross-sectional study was conducted across 13 mid-tier corporate hospitals to collect data from 438 patients. The data was processed through factor analysis in SPSS to confirm sample adequacy and factor extractability. Further, two independent multi-criteria decision-making (MCDM) tools, Fuzzy Technique for Order Performance by Similarity to Ideal Solution (F-TOPSIS) and Grey Relational Analysis (GRA), were executed to render performance analysis of identified factors.

Using F-TOPSIS, factors such as “information” and “hospital environment” received higher performance ratings, while items related to “communication with doctors” and “humanistic care” received lower rankings. Minor yet anticipated deviations were observed while verifying performance scores using GRA. Nonetheless, both outcomes exhibited a strong correlation coefficient of 97.14%, confirming analytical consistency.

Hitherto, such usages of hybrid MCDM techniques have rarely been executed to convey a clear understanding of consumers’ experiences in healthcare services. Moreover, the findings provide a clear insight into consumers’ key response areas, which can further be translated to maximize consumer gratification, thus assisting healthcare managers in improving service performance and clinical decision-making.