Search results

Religious tourism is one of the oldest and fastest-growing segments. This study analyzes religious tourism through the pilgrimage of Muslims to the holy city of Mecca and has the following objectives: (1) establish the motivational dimensions of religious tourism; (2) identify the motivational dimensions that predict the satisfaction of religious tourism and (3) determine the motivational dimensions that predict return, recommend and say positive things about religious tourism applied to the pilgrimage to a sacred city.

The sample consisted of Muslim pilgrims who had visited Mecca. The sample was collected in Bahrain, a country located on the Persian Gulf, where most of its population is Muslim. A total of 380 valid questionnaires were obtained online. For the data analysis, factorial analysis and the multiple regression method enter were performed.

The results show that religious motivations are more important when visiting a sacred city than secular ones. Three motivational dimensions were found: religious, social and cultural and shopping. The three dimensions found have a significant relationship with satisfaction and loyalty. Likewise, it was found that the religious motivational dimension is the factor that most predicts satisfaction and loyalty in the behavior of religious visits to a sacred city.

The main limitation of the present study was the temporality in which the sample was taken because the demand may vary at another time of the year and therefore vary its results.

The authors of the study recommend that holy cities increase the religious motivations of these travelers by periodically researching their needs and organizing services to suit their desired spiritual experience. Also, to improve the social and cultural part, travel agencies and tourist companies to Mecca should promote social and cultural motivation among travelers in an appropriate way by providing service packages that involve visits to cultural and social sites such as museums and cultural centers.

This research will serve as a management guide for public institutions and private companies to develop more efficient planning in religious destinations and sacred cities.

This study is the first to analyze the construct of motivations in the pilgrimage to the city of Mecca, to then establish what the main motivations are that predict satisfaction and loyalty in a religious city. Thus, its results provide important information for tourist destination managers and tourism service providers.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

Political Science in the United States has focused too much on variable-oriented, quantitative methods and thus lost its ability to ask “big questions.” Stein Rokkan (d. 1979) was an eminent comparativist who asked big questions and provided such qualitative tools as conceptual maps, grids, and clustered comparisons. Ibn Khaldun (d. 1406), arguably the first social scientist, also asked big questions and provided a universal explanation about the dialectical relationship between nomads and sedentary people. This article analyzes to what extent Ibn Khaldun's concepts of asabiyya and sedentary culture help understand the rise and fall of the Muslim civilization. It also explores my alternative, class-based perspective in Islam, Authoritarianism, and Underdevelopment. Moreover, the article explores how Rokkan's analysis of cultural, geographical, economic, and religio-political variations within Western European states can provide insights to the examination of such variations in the Muslim world.

This study aims to examine the impact of some real variables such as real effective exchange rates, real mortgage rates, real money supply, real construction cost index and housing sales on the real housing prices.

This study uses a nonlinear autoregressive distributed lag (NARDL) model in the monthly period of 2010:1–2021:10.

The real effective exchange rate has a positive and symmetric effect. The decreasing effect of negative changes in real money supply on real housing prices is higher than the increasing effect of positive changes. Only positive changes in the real construction cost index have an increasing and statistically significant effect on real house prices, while only negative changes in housing sales have a small negative sign and a small increasing effect on housing prices. The fact that the positive and negative changes in real mortgage rates are negative and positive, respectively, indicates that both have a reducing effect on real housing prices.

This study suggests the first NARDL model that investigates the asymmetric effects on real housing prices instead of nominal housing prices for Turkey. In addition, the study is the first, to the best of the authors’ knowledge, to examine the effects of the five real variables on real housing prices.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

Globally, consumer’s inclination towards functional foods had noticed due to their greater health consciousness coupled with enhanced health-care cost. The fact that probiotics could promote a healthier gut microbiome led projection of probiotic foods as functional foods and had emerged as an important dietary strategy for improved human health. It had established that ice cream was a better carrier for probiotics than fermented milked due to greater stability of probiotics in ice cream matrix. Global demand for ice cream boomed and probiotic ice cream could have been one of the most demanded functional foods. The purpose of this paper was to review the technological aspects and factors affecting probiotic viability and to standardize methodology to produce functional probiotic ice cream.

Attempt was made to search the literature (review and researched papers) to identify diverse factors affecting the probiotic viability and major technological challenge faced during formulation of probiotic ice cream. Keywords used for data searched included dairy-based functional foods, ice cream variants, probiotic ice cream, factors affecting probiotic viability and health benefits of probiotic ice cream.

Retention of probiotic viability at a level of >10⁶ cfu/ml is a prerequisite for functional probiotic ice creams. Functional probiotic ice cream could have been produced with the modification of basic mix and modulating technological parameters during processing and freezing. Functionality can be further enhanced with the inclusion of certain nutraceutical components such as prebiotics, antioxidant, phenolic compounds and dietary fibres. Based upon reviewed literature, suggested method for the manufacture of functional probiotic ice cream involved freezing of a probiotic ice cream mix obtained by blending 10% probiotic fermented milk with 90% non-fermented plain ice cream mix for higher probiotic viability. Probiotic ice cream with functional features, comparable with traditional ice cream in terms of technological and sensory properties could be produced and can crop up as a novel functional food.

Probiotic ice cream with functional features may attract food manufacturers to cater health-conscious consumers.

This study aims to explore the impact of remote work (RW) on millennials’ organizational commitment (OC) by addressing four research gaps identified in existing studies. Drawing on social exchange theory (SET), the authors also investigate if millennials are well-suited for RW environment and how shared leadership (SL) and followership moderate the relationship between RW and millennials’ OC.

A survey was conducted involving 154 millennial employees. Confirmatory factor analysis and hierarchical multiple regression analysis were performed to investigate the moderating effect of SL and followership on the relationship between RW and millennials’ OC.

The results reveal that millennials’ OC increases with the degree of RW. Moreover, both SL and followership exhibited a moderating effect on the RW-millennials’ OC relationship, emphasizing their importance in shaping millennials’ OC.

While the effect of RW on individual-level outcomes remains controversial, this study sheds light on the positive impact based on millennials' characteristics and suggests strategies to strengthen their OC in remote working environments. However, due to the cross-sectional nature of our research, a longitudinal study would be valuable to provide deeper insights.

This study contributes to the field of organizational behavior (OB) by connecting millennials’ traits with SL and followership, offering valuable insights into strengthening their OC within the context of RW through the lens of SET. By addressing and filling the four identified research gaps, our research advances knowledge in the improvement of millennials’ OC within the RW environment.

This study aims to explore the extent to which Chinese multinational enterprises (MNEs) rely on supranational institution – the Belt and Road Initiative (BRI) – versus host country institutional quality to navigate their foreign location choice.

This study uses a conditional logit regression model using a sample of 1,302 greenfield investments by Chinese MNEs in 54 BRI participating countries during the period 2011–2018.

The results indicate that as a supranational institution, the BRI serves as a substitution mechanism to address the deficiencies in institutional quality in BRI participating countries, thereby attracting Chinese MNEs to invest in those countries. In addition, the BRI’s substitution effect on host country institutional quality is more pronounced for large MNEs, MNEs in the manufacturing industry and MNEs in inland regions.

This study expands the understanding of the BRI as a supranational institution for MNEs from emerging markets and reveals its substitution effect on the host country institutional quality. Furthermore, it highlights that MNEs with diverse characteristics gain varying degrees of benefits from the BRI.

This paper aims to prompt ideas amongst readers (especially librarians) about how they can become active partners in knowledge dissemination amongst concerned user groups by implementing 3D printing technology under the “Makerspace.”

The paper provides a brief account of various tools and techniques used by veterinary and animal sciences institutions for information dissemination amongst the stakeholders and associated challenges with a focus on the use of 3D printing technology to overcome the bottlenecks. An overview of the 3D printing technology has been provided following the instances of use of this novel technology in veterinary and animal sciences. An initiative of the University Library, Guru Angad Dev Veterinary and Animal Sciences University, Ludhiana, to harness the potential of this technology in disseminating information amongst livestock stakeholders has been discussed.

3D printing has the potential to enhance learning in veterinary and animal sciences by providing hands-on exposure to various anatomical structures, such as bones, organs and blood vessels, without the need for a cadaver. This approach enhances students’ spatial understanding and helps them better understand anatomical concepts. Libraries can enhance their visibility and can contribute actively to knowledge dissemination beyond traditional library services.

The ideas about how to harness the potential of 3D printing in knowledge dissemination amongst livestock sector stakeholders have been elaborated. This promotes creativity amongst librarians enabling them to think how they can engage in knowledge dissemination thinking out of the box.