Search results

The purpose of this paper is to examine how consumer ethnocentrism (CET) and cosmopolitanism (COS) may affect Asian consumers’ perceptions of out-group countries and their products, doing so by examining similar vs dissimilar countries across countries of origin. Given the strong inter-country rivalries that exist among Asian countries, the authors propose two alternative hypotheses, drawing from social identity theory and realistic group conflict theory.

To test the hypotheses, the authors examine consumer perceptions of both Western countries (dissimilar out-groups) and Asian countries (similar out-groups) within China (Study 1). In addition, the authors investigate how CET and COS affect consumer perceptions of Asian countries in Japan and in non-Asian dissimilar countries, and compare the effects between the two regions (Study 2).

The findings indicate that CET shows greater negative effects on perceptions of a country and its products, when the country is from a similar out-group than when it is from a dissimilar one. On the other hand, COS showed equally strong positive effects among consumers for both similar and dissimilar out-group countries.

The results suggest that Asian consumers feel a sense of intergroup rivalry with other Asian countries, and, as a result, exhibit a greater degree of ethnocentric biases toward these countries and their products than they do toward Western countries and products. Also, the results suggest that COS may transcend national differences and inter-country rivalries in consumer consumption tendencies.

The study examines inter-country similarities as a moderator of CET and COS effects, which has not been extensively researched in the past. In addition, the study discusses the concept of intergroup rivalry among neighboring countries and examines how it affects consumer perceptions of out-group countries and their products in Asia, where strong inter-country rivalries exist.

America’s patent rate (per 100,000 population) rose steeply to 34 from 1820‐1885, hovered between 28‐36 for the next 40 years then started its plunge to the present 18. This article examines the numerous possible causes often found in the literature ‐ expenditures on R&D, poor patent protection, high fees and pendency delays, decline in education in sciences and engineering, etc. While there is some evidence to support each of these, none is as important as the decline in our immigrants from Europe. Projections of possible improvements in our creativity and innovation in sciences and technology are bound in the characteristics of our present and future immigrant streams, and these are not expected to replace the role played by our previous immigrant streams.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Quality 4.0 is an emerging research topic concerned with rethinking how quality management needs to be adopted in the digital era. The purpose of this research is to conduct a systematic review on the state of the research in the field of Industry 4.0 impact on improving quality management aspects and how technology can be leveraged to enhance its practices.

A systematic review of the literature published in the last 5 years is conducted. 52 papers were selected, mapped based on the technology they focused on and categorized based on the addressed quality aspects.

The review revealed various areas where quality management can benefit from Industry 4.0 technologies, identified several research gaps and suggested new directions for future research. Firstly, the literature provided some insights about industry 4.0 potential contributions but lacks further detail on the exact applications and solutions through use cases and case studies. Secondly, there has been a focus on the potential benefits provided for quality control while there is a clear scarcity in terms of the other quality management tools and methodologies. Thirdly, there is a lack of studies on economic analysis or detailed impacts on quality costs that justifies the substantial investments needed. Finally, there is a need for including more studies about the mapping and integration of ISO 9001 requirements and Industry 4.0 features.

This is the first attempt to conduct a comprehensive review on the ways industry 4.0 technologies can be leveraged for the field of quality management. Based on this review, several directions for further research in this area are identified.

This study defines and critically analyzes Korean high modernism using the Sewoon Sangga project as a case study, as it has significant value in Korea's urban and architectural history.

The methodology applied for this study was a theory-interpretive analysis. This study examines the modernization process of Seoul based on the concept of “high modernism,” in that the theory-interpretive analysis method analyzes historical phenomena centered on a specific concept.

As a form of national belief, the various ideas that give birth to modern cities are defined as “high modernism.” As a Korean megastructure, the Sewoon Sangga project is significant in the history of Korean urbanism and architecture because it is the archetype of Korean high modernism and is representative of South Korea's compressed economic growth. However, soon-to-be-demolished Sewoon Sangga signifies the failure of Korean high modernism. This study identified the critical characteristics of Korean high modernism through the Sewoon Sangga project.

This study analyzed a representative Asian city through the specific concept of high modernism. It transpired that high modernism, which played an important role in the birth and development of modern cities, should be transformed for future cities and architectural development. This study has significance in that it expands the study of the history of urbanism and architecture centered on the West to the same in Asia.

This study aims to obtain the speed and angle during safe and comfortable standing of elderly people. With the advancement of society, it is becoming increasingly difficult for the elderly to sit-to-stand (STS) independently and comfortably in a safe and comfortable manner. Safety is essentially a prerequisite for the elderly to achieve a comfortable STS. The speed, angle and power of the STS process can all affect safe STS. From the standpoint of health-care delivery and administration, comfortable STS can be realized easily by addressing the safety issues during STS.

This paper summarizes the research progress on speed and angle during safe and comfortable standing of older people. The authors analyzed the speed and angle of the STS using the Vicon optical gait acquisition system and plantar pressure sensor to find the appropriate angle and speed thresholds.

The center of gravity movement is a prerequisite for the elderly to achieve a comfortable STS. The authors found that the standing speed during the STS process should not be higher than 103.8 mm/s so that the elderly can stand comfortably and safely (safe and dangerous speeds are 72.8 mm/s and 125.2 mm/s). The limitations of waist angle, waist angle speed and the acceleration are also obtained.

This paper analyzes and summarizes the research status of speed and angle during safe and comfortable standing of elderly people, which is essentially a prerequisite for the elderly to achieve a comfortable STS. These results can lay the foundation for the development of assistive devices and related technologies that meet the needs of older adults.

The purpose of this paper is twofold: first, it explores the influencing factors of the government’s trust decision-making in the private sector; second, it explores how these influencing factors affect the government’s trust decisions.

A theoretical model was established, and a questionnaire survey was conducted among 152 professionals. The collected datas were analyzed by the structural equation modeling (SEM) method.

The study identified four critical factors that influence the government’s decision to trust the private sector in public-private-partnership (PPP) projects. All the four factors have a positively correlated impact on the government’s trust decision-making. The structural equation path analysis shows that the most important factor affecting the government’s trust decision-making is the trustee’s (private sector) trustworthy characteristics, and the path coefficient is 0.92. The path coefficients of risk perception and the trustor’s trust tendency are 0.83 and 0.74, respectively. The influence of the legal system environment on government trust decision-making is moderate, with a path coefficient of 0.68.

This paper contributes to the literature in two aspects. First, the factors influencing decision-making to government trust in the private sector in PPP projects have been identified. Second, a comprehensive view of the mechanism of government trust in the private sector in PPP projects has been theorized by the SEM method.

The purpose of this paper is to report a study in which creative design concepts have been applied to automotive brake rotor design.

The literature review on creative design concepts and braking system scenario has been carried out. By studying the existing brake rotors and applying creative design concepts, modified rotor designs have been developed.

The experience gained out of the study indicated that braking efficiency and durability of the braking system can be significantly improved by the adoption of proposed designs.

The research has been carried out for an automotive passenger car. The findings of this research work could be extended to similar models of buses and trucks.

The usage of the proposed designs reduces the driver’s effort in braking and adds significantly to the life of the rotors.

A case study has been reported to indicate the application of creative design concepts for enhancing the efficiency of automotive braking system in cars.

The purpose of this paper is to investigate the moderated mediation model in which the effect of perceived organizational support (POS) on knowledge sharing intention is mediated by levels of individual affective commitment to the organization, while the relationship between POS and affective commitment is moderated by organizational tenure.

Hypotheses on mediation, moderation and moderated mediation were tested with data collected from Korean for-profit organizations. Conditional process analyses with bootstrapping supported all three hypotheses.

The findings demonstrate that the relationship between POS and knowledge sharing intention is mediated by affective organizational commitment. In addition, the mediation effect is strengthened when an individual’s organizational tenure is low. Theoretical and practical implications and directions for future research are followed.

This study contributes to the literature on knowledge sharing by providing a basis for understanding the mediating mechanism through which POS influences knowledge sharing intention, and, ultimately, organizational functioning via individual affective attitude. This is the first attempt examining the role of organizational tenure as a key contingency factor in knowledge sharing. By investigating the underlying logic of individual intention to share knowledge, this study expands the current spectrum for knowledge management.

In line with emerging conceptualizations of humility in organizations, the purpose of this paper is to examine how leader humility and distance-based factors (i.e. power distance orientation (PDO) and hierarchical distance) interact to predict follower psychological empowerment.

The authors tested the hypotheses using a sample of 294 employees in South Korea. Moderated regression and bootstrapping analyses were conducted to test for direct and moderated relationships.

Results indicated that leader humility positively predicted follower psychological empowerment, and followers’ PDO positively moderated this relationship. Results of a three-way interaction indicated that the impact of leader humility on follower psychological empowerment was strongest when both followers’ levels of PDO and hierarchical distance were high.

Humility can provide a new lens through which to understand the leadership process. Beyond anecdotal accounts, this study provided strong evidence for the value of humility on the list of qualities essential for successful leadership.

This is the first study to provide empirical evidence for the moderating effect of PDO and hierarchical distance on the relationship between leader humility and follower empowerment. The findings highlight the benefits of understanding the roles of followers’ cultural value orientation and hierarchical position in the effectiveness of leader humility.