Search results
1 – 10 of 16Weishan Huang, Jing-Li Luo, Hani Henein and Josiah Jordan
This paper aims to evaluate the sulfide stress cracking (SSC) resistance of L80 casing steels with different alloying chemistries (e.g. Ti-B and Mn-Cr-Mo) by correlating the…
Abstract
Purpose
This paper aims to evaluate the sulfide stress cracking (SSC) resistance of L80 casing steels with different alloying chemistries (e.g. Ti-B and Mn-Cr-Mo) by correlating the reduction in area ratio with the mechanical property, inclusion and carbide.
Design/methodology/approach
SSC tests were conducted in 5.0 Wt.% sodium chloride and 0.5 Wt.% acetic acid solution saturated with H2S using constant load tensile method. The microstructure and fracture morphology of the steel were observed using scanning electron microscope. The inclusion and carbide were identified by energy dispersive spectroscopy and auger electron microscope.
Findings
Among all the testing steels, electric resistance welding (ERW) L80-0.5Mo steel demonstrates the highest SSC resistance because of its appropriate mechanical properties, uniform microstructure and low inclusion content. The SSC resistance of L80 steels generally decreases with the rising yield strength. The fracture mode of steel with low SSC resistance is jointly dominated by transgranular and intergranular cracking, whereas that with high SSC resistance is mainly transgranular cracking. SSC is more sensitive to inclusions than carbides because the cracks are easier to be initiated from the elongated inclusions and oversized oxide inclusions, especially the inclusion clusters. Unlike the elongated carbide, globular carbide in the steel can reduce the negative effect on the SSC resistance. Especially, a uniform microstructure with fine globular carbides favors a significant improvement in SSC resistance through precluding the cracking propagation.
Originality/value
The paper provides the new insights into the improvement in SSC resistance of L80 casing steel for its application in H2S environment through optimizing its alloying compositions and microstructure.
Details
Keywords
Esther Waruingi, Josiah Ateka, Robert Mbeche and Raoul Herrmann
Forests support human livelihoods and mitigate against climate change, yet they are at a risk of irreversible loss due to high degradation rates. The success of forest…
Abstract
Purpose
Forests support human livelihoods and mitigate against climate change, yet they are at a risk of irreversible loss due to high degradation rates. The success of forest conservation mechanisms depends on involvement and support by forest dependent communities. In this paper, the authors assess forest dependent household's willingness to pay (WTP) labour or cash for a conservation programme seeking to restore degraded forestland in Mount Elgon Forest, Kenya.
Design/methodology/approach
Data were collected from 919 households in Mt Elgon forest reserve, Kenya. A double bounded contingent valuation approach was used to examine households' WTP and an ordered probit model to estimate the determinants of WTP.
Findings
The findings of the study show a higher WTP for conservation through labour days (12 days/month, equivalent to 1800 KES/month) compared to cash (KES 450/month). Forest dependence has a significant influence on households' willingness to support conservation activities. A higher WTP was observed amongst households with higher vulnerability (high shocks value, low asset value and those in the poorest wealth categories) implying that they are more willing to contribute for forest conservation.
Originality/value
While emerging literature on WTP for forest conservation is growing, few studies have paid attention on the influence of forest dependence on WTP for forest conservation. There are limited studies on use of in-kind contribution as a payment vehicle for WTP. The study's findings show a high WTP in form of labour suggesting the importance of embracing in-kind contribution as a mechanism of supporting forest conservation in contexts of developing countries.
Details
Keywords
Abstract
Details
Keywords
Jiju Antony, Pruksathorn Palsuk, Sandeep Gupta, Deepa Mishra and Paul Barach
The purpose of this paper is to illustrate the systematic role played by Six Sigma methodology in improving the quality of healthcare. The literature review identifies the…
Abstract
Purpose
The purpose of this paper is to illustrate the systematic role played by Six Sigma methodology in improving the quality of healthcare. The literature review identifies the relevant opportunities for successful introduction and development of Six Sigma approach in healthcare sector.
Design/methodology/approach
A systematic methodology to identifying literature on Six Sigma in healthcare is presented. Web of Science, Medline, Emerald Insight, ASQ and ProQuest databases (1998-2016) were searched, and 68 papers of fair methodological quality were identified.
Findings
The findings of the systematic review reveal a growing interest in research on Six Sigma adoption in healthcare. The findings indicate that Six Sigma applications in healthcare have been focused on the entire hospital with no real focus on a particular department or function. The key findings on benefits, success factors, challenges and common tools of Six Sigma from the existing literature are also presented in the paper.
Research limitations/implications
The papers included in the systematic review were peer-reviewed papers available in English. Due to these limitations, relevant papers may have been excluded. Moreover, the authors have excluded all conference and white papers for their inclusion in this study.
Originality/value
This paper can serve as a guide on how Six Sigma approach can be applied to improve the quality of healthcare. The authors also believe that this is possibly the most comprehensive systematic literature review on the topic and will set the foundation for various research avenues based on the key findings of this study.
Details
Keywords
Musa Kribat, Bruce Burton and Louise Crawford
The paper aims to investigate disclosure practices in the annual reports of Libyan banks in the run‐up to the opening of the nation's first stock exchange. Banks dominate this…
Abstract
Purpose
The paper aims to investigate disclosure practices in the annual reports of Libyan banks in the run‐up to the opening of the nation's first stock exchange. Banks dominate this embryonic market but very little research has examined the extent (or determinants) of transparency achieved by these firms, an issue argued by Stiglitz and others to be crucial in the post‐crisis era. Currently, no detailed evidence of disclosure practices prior to the launch of the exchange exists, making an accurate assessment of the market's impact in this area impossible; the present study therefore contributes in this regard as well.
Design/methodology/approach
The study employs two main methods: a disclosure index‐based analysis of mandatory and overall disclosure levels; and panel regression analysis of the determinants of the overall disclosure levels.
Findings
The results suggest that while many items are disclosed on a regular basis, on average barely more than half of all possible items appear in the annual reports. As regards compliance with mandatory requirements, the figures are higher but, worryingly, begin to fall as the launch of the market neared. The results of panel‐data analysis suggest that the overall extent of disclosure is non‐random, instead reflecting the profits achieved by the banks concerned.
Originality/value
This paper is the first detailed analysis of disclosure practices in Libyan banks and the results suggest that market authorities should be looking for an improvement in the figures, in particular the reversal of a downward trend in compliance with mandatory requirements. The paper reports a link between profit level and disclosure propensity; this evidence might be of use to regulators charged with increasing disclosure levels in the future. More generally, the results provide a comparative basis on which to assess the effect of the market's launch on disclosure practices in Libya.
Details
Keywords
The purpose of this study is to outline a conceptual framework that can be used to organise and guide future research into how celebrity product endorsement creates equity for…
Abstract
Purpose
The purpose of this study is to outline a conceptual framework that can be used to organise and guide future research into how celebrity product endorsement creates equity for both the endorsed product‐brand and the endorsing celebrity.
Design/methodology/approach
The theoretical perspective adopted in this study is that celebrity product endorsement is a form of co‐branding.
Findings
The central thesis is that both endorser image and brand image serve as mediators in the equity‐creation process of celebrity product endorsement.
Originality/value
Research contributions and directions for future research are provided.
Details
Keywords
MID‐OCTOBER sees the activities of the library world in full swing. Meetings, committee discussions, schools at work, students busy with December and May examinations in view, and…
Abstract
MID‐OCTOBER sees the activities of the library world in full swing. Meetings, committee discussions, schools at work, students busy with December and May examinations in view, and a host of occupations for the library worker. This year—for in a sense the library year begins in October—will be a busy one. For the Library Association Council there will be the onerous business of preparing a report on State Control; for libraries there will be the effort to retain readers in a land of increasing employment and reduced leisure; and for the students, as we have remarked in earlier issues, preparations for the new syllabus of examinations which becomes operative in 1938. It is a good month, too, to consider some phases of library work with children, “which,” to quote the L.A. Resolutions of 1917, “ought to be the basis of all other library work.”
At a recent inquest upon the body of a woman who was alleged to have died as the result of taking certain drugs for an improper purpose, one of the witnesses described himself as…
Abstract
At a recent inquest upon the body of a woman who was alleged to have died as the result of taking certain drugs for an improper purpose, one of the witnesses described himself as “an analyst and manufacturing chemist,” but when asked by the coroner what qualifications he had, he replied : “I have no qualifications whatever. What I know I learned from my father, who was a well‐known ‘F.C.S.’” Comment on the “F.C.S.” is needless.