Search results

Low temperature co‐fired ceramics (LTCC) material is introduced as an excellent alternative to silicon, glass, or plastic materials for the fabrication of miniaturised analytical devices, though it is most widely used in the automotive and microwave industries. The paper aims to study the laser ablation of LTCC material.

This kind of green tape material is mechanised by excimer laser (KrF, 248 nm) and UV laser (Nd: YAG, 355 nm), and for the first time by infra‐red laser (1,090 nm). The optical photos and the scanning electronic microscope (SEM) photos of the LTCC ablated by different kinds of laser sources are given in this paper.

When using the UV laser, the tapered structure can be easily seen from the SEM photo. However, a kind of clear and perfect ablation of LTCC can be seen for the first time by the 1,090 nm infra‐red laser ablation.

The laser ablation of LTCC by optical fibre sources is discussed.

User-oriented seamless service handoff is prosperous in the ubiquitous computing environment. This paper aims to present an open architecture for the user-oriented seamless service handoff across heterogeneous platforms. The migration of service environment is the key to implement the user-oriented service handoff. A distributed service handoff scheme based on the binary sensor network and context-aware middleware has been proposed.

To validate this scheme, a test-bed has been constructed in the lab environment.

The experimental results show that the proposed scheme can reduce the service handoff delay compared to the centralized scheme.

The experimental results show that the scheme can reduce the delay of service handoff compared to the traditional centralized scheme.

The purpose of this paper is to utilize a multi-method design for research on corruption in China. Corruption in any society is inimical to good governance. Singapore, despite her size, is argued to be a plausible model for China.

Taking a multi-method approach, the phenomena of corruption is investigated from: etymological analyses for corruption (European roots) and its Chinese equivalent, 贪污 (pinyin: tan wu) case studies taken from three periods: current, Qing Dynasty and to founding of China (zhong guo, Qin Dynasty) to ground our policy recommendation of China be modeling after Singapore on the basis of our analysis of statistical (2013 and longitudinal) data. In the process, the authors embark on inter-country comparisons (mainly Confucian China, Hong Kong, Taiwan, South Korea and Japan).

Here are the key insights: scholars are unaware the English word corruption is narrower in scope than the Chinese equivalent tan wu贪污. As far back as 3,000 years, the Chinese had attributed wu, 污 as filthy, polluting, dirty to psychological concept of greed tan, 贪. In English, corruption does not denote greed per se. Falsification of facts as a political ploy dates back to Qin dynasty. Destabilizing corrupt cases occurred in China today as in Qing Dynasty. Singapore rather Hong Kong is a better model for China in reforming society.

This paper illustrates a distinctively, in-depth approach to research on Chinese management. It shows why it is important to clarify key concepts: corruption in the West and tan wu贪污in the East. Historical cases are utilized to show the presence of a continuing Chinese mind set. The authors argued for China to embark on a city-by-city strategy (modeling after Singapore) toward becoming a corruption-free society. Now, as 3,000 years ago, the Chinese conceptualization of corruption embeds the psychology of greed.

China is at a crossroad of her economic development. There is a possible risk of China being destabilized through the corruption of the top rung of leadership. Chinese authorities must with urgency, rein in corruption. An approach is proposed in this paper.

In terms of style, approach and method of research, this paper is highly original. The integrative research here provides a rationale and basis for the Chinese leaders to implement a policy for a less corrupt society.

With respect to the multiple-attribute decision-making problem with subjective preference for a certain attribute whose weight-value range have been given over other attributes whose weight values are unknown, a method based on the mean value of the grey number is proposed to analyse the decision-making problem. This method is used to choose a supply-chain partner under the condition that the decision makers have a preference for a certain attribute of various alternatives. The paper aims to discuss these issues.

First, the middle value of the preferred attribute’s weight-value range is supposed to be its weight value according to the content of the mean value of the grey number. Second, to reflect the decision maker’s subjective preference information, an improved optimisation model that requests the minimum deviation between the actual and expected numerical value of each attribute is constructed to assess the attributes’ weights. Third, the correlated degree and the correlation matrix, which are determined by the weight values of all attributes, are used to rank all the alternatives.

This paper provides a method for making a decision when decision makers have a preference for a certain attribute from an array of various alternatives, and the range of the certain attribute’s weight value is given but the weight value of the other attributes is unknown. When applied to supply-chain partner selection, this method proves feasible and effective.

This method is feasible and effective when applied to supply-chain partner selection, and can be applied to other kinds of decision-making problems. This means it has significant theoretical importance and extensive practical value.

Based on the mean value of the grey number, an optimisation model is built to determine the importance degree of each attribute, then the correlated degree of each alternative is combined to rank all the alternatives. This method can suit the decision makers’ subjective preference for a certain attribute well.

In this paper, we evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

We employ a Dynamic GTAP-VA Model to quantitatively evaluate the economic repercussions of the “Chip Act” on the Chinese electronic industries' GVC participation from 2023 to 2040.

The findings depict a discernible contraction in China’s electronic sector by 2040, marked by a −2.95% change in output, a −3.50% alteration in exports and a 0.45% increment in imports. Concurrently, the U.S., EU and certain Asian economies exhibit expansions within the electronic sector, indicating a GVC realignment. The “Chip Act” implementation precipitates a significant divergence in GVC participation across different countries and industries, notably impacting the electronics sector.

Through a meticulous temporal analysis, this manuscript unveils the nuanced economic shifts within the GVC, substantially bridging the empirical void in existing literature. This narrative accentuates the profound implications of policy regulations on global trade dynamics, contributing to the discourse on international economic policy and industry evolution.

We evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

The interaction between policy regulations and global value chain (GVC) dynamics is pivotal in understanding the contemporary global trade framework, especially within technology-driven sectors. The US “Chips Act” represents a significant regulatory milestone with potential ramifications on the Chinese electronic industries' engagement in the GVC.

The significance of this paper is that it quantifies for the first time the impact of the US Chip Act on the GVC participation index of East Asian countries in the context of US-China decoupling. With careful consideration of strategic aspects, this paper substantially fills the empirical gap in the existing literature by presenting subtle economic changes within GVCs, highlighting the profound implications of policy regulation on global trade dynamics.

The precise segmentation of brain tumors is the most important and crucial step in their diagnosis and treatment. Due to the presence of noise, uneven gray levels, blurred boundaries and edema around the brain tumor region, the brain tumor image has indistinct features in the tumor region, which pose a problem for diagnostics. The paper aims to discuss these issues.

In this paper, the authors propose an original solution for segmentation using Tamura Texture and ensemble Support Vector Machine (SVM) structure. In the proposed technique, 124 features of each voxel are extracted, including Tamura texture features and grayscale features. Then, these features are ranked using the SVM-Recursive Feature Elimination method, which is also adopted to optimize the parameters of the Radial Basis Function kernel of SVMs. Finally, the bagging random sampling method is utilized to construct the ensemble SVM classifier based on a weighted voting mechanism to classify the types of voxel.

The experiments are conducted over a sample data set to be called BraTS2015. The experiments demonstrate that Tamura texture is very useful in the segmentation of brain tumors, especially the feature of line-likeness. The superior performance of the proposed ensemble SVM classifier is demonstrated by comparison with single SVM classifiers as well as other methods.

The authors propose an original solution for segmentation using Tamura Texture and ensemble SVM structure.

The importance of Carbon dioxide (CO₂) gas detection as a greenhouse and exhale breathe gas is an undeniable issue. This study aims to propose a new miniaturized, low cost and portable no dispersive infrared (NDIR) system for detecting CO₂ gas.

Poly(methyl methacrylate) (PMMA)-based channels with Au coating because of its high reflection properties in IR region were used in this work. The optical windows were fabricated using PDMS polymer which is cost effective and novel in comparison to other conventional methods. The effects of channel dimensions, lengths and entrance angle of light on optical path length and losses were analyzed with four types of channel using both simulation and experimental tests.

The simulation results indicate that the 0 degree light entrance angle is the most efficient angle among different investigated conditions. The experimental data are in agreement with the simulation results regarding the loss and optical path length in different types of channel. The experimental tests were performed for the 0.5% up to 20% of CO₂ concentration under constant temperature and humidity condition. The results show that the device with 5  and 2 cm channels length were saturated in 4% and 8% concentration of CO₂ gas, respectively. Response and recovery times were depending on gas concentration and channels specifications that in average found to be 10 S and 14 S, respectively, for the largest size channel. Moreover, the environment humidity effect on detection system performance was investigated which had no considerable influence. Also, the saturation fraction absorbance value for devices with various dimensions were 0.62 and 0.8, respectively.

According to the performed curve fitting for practical situation and selected CO₂ concentration range for experimental tests, the device is useful for medical and environmental applications.

PMMA with Au deposition layer was used as a basic material for this NDIR system. Besides, a novel PDMS optical window helps to have a low cost device. The effects of channel dimensions, lengths and entrance angle of light on optical path length and losses were analyzed using both simulation and experimental tests. Using narrowband optical filter (100 nm bandwidth) helps to have a system with good CO₂ selectivity. In addition, experimental tests with different channel dimensions and lengths covered a considerable range of CO₂ concentration useful for medical and environmental applications. Finally, curve fitting was adopted for a modified Beer–Lambert law as a practical situation.