Search results

1 – 9 of 9
Article
Publication date: 16 June 2020

Jiawei Wang, Jinliang Liu, Guanhua Zhang and Jigang Han

Considering the “size effect” and the properties degradation of building materials on the strengthened engineering, in this paper, the technology of pasting steel plate was…

Abstract

Purpose

Considering the “size effect” and the properties degradation of building materials on the strengthened engineering, in this paper, the technology of pasting steel plate was adopted to shear strengthen a 16 m prestressed concrete hollow slab, which had serviced 20 years in cold regions. The shear properties of shear strengthen beams are analyzed.

Design/methodology/approach

Shear loading test of the shear strengthened beam and the contrast beam was conducted. Then the mechanical characteristics, failure mechanism, the mechanical response and shear capacity of shear strengthened beam and contrast beam had been discussed.

Findings

The failure mode of shear strengthened beam and contrast beam was shear compression failure, and the bond failure between concrete and prestressed reinforcement happened in both of test beams. The shear strengthening method of pasting steel plate can effectively improve the mechanical response for the shear strengthened beam. Compared with the contrast beam, the cracking load and failure shear capacity for the shear strengthened beam can be effectively increased by 12.2 and 27.6%, respectively.

Originality/value

The research results can be a reference for the detection and evaluation of shear strengthened bridges, which are strengthened by pasting steel plate. Engineers can refer to the shear strengthening method in this paper to strengthen the existing bridge, which can guarantee the safety of shear strengthened bridges.

Details

International Journal of Structural Integrity, vol. 12 no. 3
Type: Research Article
ISSN: 1757-9864

Keywords

Article
Publication date: 17 July 2019

Guanhua Zhang, Jiawei Wang, Jinliang Liu, Yanmin Jia and Jigang Han

During service, cracks are caused in prestressed concrete beams owing to overload or other non-load factors. These cracks significantly affect the safety of bridge structures. The…

Abstract

Purpose

During service, cracks are caused in prestressed concrete beams owing to overload or other non-load factors. These cracks significantly affect the safety of bridge structures. The purpose of this paper is to carry out a non-linear iterative calculation for a section of a prestressed concrete beam and obtain the change in stiffness after the section cracks.

Design/methodology/approach

The existing stress of prestressed reinforcement was measured by performing a boring stress release test on two pieces of an in-service 16 m prestressed concrete hollow plate. Considering the non-linear effects of materials, the calculation model of the loss in the flexural stiffness of the prestressed concrete beam was established based on the existing prestress. The accuracy of the non-linear calculation method and the results obtained for the section were verified by conducting a bending destruction test on two pieces of the 16 m prestressed concrete hollow plate in the same batch and by utilising the measured strain and displacement data on the concrete at the top edge of the midspan section under all load levels.

Findings

The flexural stiffness of the section decreases rapidly at first and then gradually, and structural rigidity is sensitive to the initial cracking of the beam. The method for calculating the loss in the flexural stiffness of the section established with the existing stress of prestressed reinforcement as a parameter is accurate and feasible. It realizes the possibility of assessing the loss in the rigidity of a prestressed concrete structure by adopting the existing stress of prestressed reinforcement as a parameter.

Originality/value

A method for quickly determining the loss in the stiffness of structures using existing prestress is established. By employing this method, engineers can rapidly determine whether a bridge is dangerous or not without performing a loading test. Thus, this method not only ensures the safety of human life, but also reduces the cost of testing.

Details

International Journal of Structural Integrity, vol. 10 no. 4
Type: Research Article
ISSN: 1757-9864

Keywords

Article
Publication date: 1 October 2018

Jiawei Wang, Yanmin Jia, Guanhua Zhang, Jigang Han and Jinliang Liu

Most existing studies are confined to model beam tests, which cannot reflect the actual strengthening effects provided by prestressed carbon-fiber-reinforced polymer (CFRP) plates…

Abstract

Purpose

Most existing studies are confined to model beam tests, which cannot reflect the actual strengthening effects provided by prestressed carbon-fiber-reinforced polymer (CFRP) plates to existing bridges. Hence, the actual capacity for strengthening existing bridges with prestressed CFRP plates is becoming an important concern for researchers. The paper aims to discuss these issues.

Design/methodology/approach

Static load tests of in-service prestressed concrete hollow slabs before and after strengthening are conducted. Based on the results of the tests, the failure characteristics, failure mechanism and bending performance of the slabs are compared and analyzed. Nonlinear finite element method is also used to calculate the flexural strength of the strengthened beams prestressed with CFRP plates.

Findings

Test results show that prestressed CFRP plate strengthening technology changes the failure mode of hollow slabs, delays the development of deflection and cracks, raises cracking and ultimate load-carrying capacity and remarkably improves mechanical behavior of the slab. In addition, the nonlinear finite element analyses are in good agreement with the test results.

Originality/value

Strengthening with prestressed CFRP plates has greater advantages compared to traditional CFRP plate strengthening technology and improves active material utilization. The presented finite element method can be applied in the flexural response calculations of strengthened beams prestressed with CFRP plates. The research results provide technical basis for maintenance and reinforcement design of existing bridges.

Details

International Journal of Structural Integrity, vol. 9 no. 5
Type: Research Article
ISSN: 1757-9864

Keywords

Article
Publication date: 9 March 2021

Qin Qin, Jigang Huang, Jin Yao and Wenxiang Gao

Scanning projection-based stereolithography (SPSL) is a powerful technology for additive manufacturing with high resolution as well as large building area. However, the surface…

Abstract

Purpose

Scanning projection-based stereolithography (SPSL) is a powerful technology for additive manufacturing with high resolution as well as large building area. However, the surface quality of stitching boundary in an SPSL system has been rarely studied, and no positive settlement was proposed to address the poor stitching quality. This paper aims to propose an approach of multi-pass scanning and a compensation algorithm for multi-pass scanning process to address the issue of poor stitching quality in SPSL systems.

Design/methodology/approach

The process of multi-pass scanning is realized by scanning regions repeatedly, and the regions can be cured simultaneously because of the very short repeat exposure time and very fast scanning. Then, the poor stitching quality caused by the non-simultaneous curing can be eliminated. Also, a compensation algorithm is designed for multi-pass scanning to reduce the stitching errors. The validity of multi-pass scanning is verified by curing depth test, while the performance of multi-pass scanning as well as proposed compensation algorithm is demonstrated by comparing with that of a previous SPSL system.

Findings

The results lead to a conclusion that multi-pass scanning with its compensation algorithm is an effective approach to improve the stitching quality of an SPSL system.

Practical implications

This study can provide advice for researchers to achieve the satisfactory surface finish with SPSL technology.

Originality/value

The authors proposed a process of multi-pass scanning as well as a compensation algorithm for SPSL additive manufacturing (system to improve the stitching quality, which has rarely been studied in previous work.

Details

Rapid Prototyping Journal, vol. 27 no. 3
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 19 May 2023

Jing Yuan, Yongquan Liu, Xichun Han, Aiping Li and Liling Zhao

The paper aims to propose a virtual reality (VR) wisdom teaching model in open university English course from the perspective of “Metaverse”. The study aims to testify the…

Abstract

Purpose

The paper aims to propose a virtual reality (VR) wisdom teaching model in open university English course from the perspective of “Metaverse”. The study aims to testify the stimulation for English learning and the effectiveness of English-expressing with VR tools for adult learners from the practice in a pilot reform project.

Design/methodology/approach

The paper opted for an exploratory study using ICARE Design Model as the framework, under the grounded theories of constructivism and multi-modal teaching. The study compared the evaluation data of one-semester English learning performance between the experimental class (67 students) with VR practice and the controlled class (67 students), including speaking test score, qualitative feedback and in-depth experience analysis. The data were complemented by reflection paper analysis, including manual evaluation (the criteria of semantics, pronunciation, fluency and completeness), questionnaire survey (in the form of five-point Likert scale) and semi-structured interview.

Findings

The paper provides empirical insights about the VR wisdom teaching model in English language teaching and learning in a Chinese Open University. The empirical results suggest that “3I” features of VR technology could make up for the shortcomings of traditional English classes in open universities in China, and VR resources designed with curriculum teaching materials could also be helpful for students’ command of knowledge points and language skills. What’s more, the sense of authentic experience in virtual could promote the teaching and learning effect in college English classes.

Research limitations/implications

The present study focuses on a wisdom mode of foreign language teaching and learning for adult learners in open education, so the research results may lack generalizability. Therefore, researchers are encouraged to further explore the deep integration of VR/artificial intelligence in foreign language teaching and learning.

Originality/value

This paper fulfills an identified need to study how VR tools provide an engaging, fun and immersive language learning environment, to enhance autonomous learning and learning engagement.

Details

Interactive Technology and Smart Education, vol. 20 no. 3
Type: Research Article
ISSN: 1741-5659

Keywords

Content available
Book part
Publication date: 18 September 2023

Mohamed Ismail Sabry

Abstract

Details

The Growth Paths of State-Society Relations
Type: Book
ISBN: 978-1-80262-246-1

Open Access
Article
Publication date: 13 February 2024

Jinwei Wang, Haoyang Lan and Jiafei Chen

This study aims to elucidate the process and internal mechanism of place identity construction in traditional villages under the impact of tourism by taking Cuandixia village as a…

Abstract

This study aims to elucidate the process and internal mechanism of place identity construction in traditional villages under the impact of tourism by taking Cuandixia village as a case. The research methods comprise participatory observation and in-depth interviews with the residents. The main results are as follows: the impact of tourism on traditional villages is mainly reflected in space reconstruction, livelihood change, social relations restructuring and culture change; under the impact of tourism, the representation of residents’ identity construction shows complexity, with positive and negative effects; and the place identity construction of residents affects their perception of and attitudes toward tourism. Moreover, self-esteem and self-efficacy principles play a key role in their perception of tourism. This study provides some reference for further investigation of the tourism development model and the mental mechanism of residents in traditional villages.

Details

Tourism Critiques: Practice and Theory, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2633-1225

Keywords

Article
Publication date: 2 December 2022

Lijun Dong, Naichao Chen, Jiawen Liang, Tingting Li, Zhanlin Yan and Bing Zhang

The purpose of this study is to provide an in-depth understanding about the indoor-orbital electrical inspection robot, which is useful for motivating the further investigation on…

Abstract

Purpose

The purpose of this study is to provide an in-depth understanding about the indoor-orbital electrical inspection robot, which is useful for motivating the further investigation on the inspection of electrical equipment. Currently, electric energy has a strong correlation with the economic development of the country. Intelligent substations play an important role in the transmission and distribution of the electricity; the maintenance of the substation has attracted intensive attention due to the requirement of reliability and safety. The indoor-orbital electrical inspection robot has increasingly become the main tool to realize the unmanned. Hence, a systematic review is conducted systematically reviewing the current technical status of the indoor-orbital electrical inspection robot and discuss the existed problems.

Design/methodology/approach

In this paper, the most essential achievements in the field of indoor-orbital electrical inspection robots were reported to present the current status, and the mechanical structures and key inspective technologies were also discussed.

Findings

Four recommendations are provided from the analyzed review, which have made constructive comments on the overall structural design, functionality, intelligence and future development direction of the indoor-orbital electrical inspection robot, respectively.

Originality/value

To the best of the authors’ knowledge, this is the first systematic review study on indoor-orbital electrical inspection robots; it fills the theoretical gap and proffers design ideas and directions for the development of the indoor-orbital electrical inspection robot.

Details

Industrial Robot: the international journal of robotics research and application, vol. 50 no. 2
Type: Research Article
ISSN: 0143-991X

Keywords

Article
Publication date: 24 September 2019

Madjid Tavana and Vahid Hajipour

Expert systems are computer-based systems that mimic the logical processes of human experts or organizations to give advice in a specific domain of knowledge. Fuzzy expert systems…

Abstract

Purpose

Expert systems are computer-based systems that mimic the logical processes of human experts or organizations to give advice in a specific domain of knowledge. Fuzzy expert systems use fuzzy logic to handle uncertainties generated by imprecise, incomplete and/or vague information. The purpose of this paper is to present a comprehensive review of the methods and applications in fuzzy expert systems.

Design/methodology/approach

The authors have carefully reviewed 281 journal publications and 149 conference proceedings published over the past 37 years since 1982. The authors grouped the journal publications and conference proceedings separately accordingly to the methods, application domains, tools and inference systems.

Findings

The authors have synthesized the findings and proposed useful suggestions for future research directions. The authors show that the most common use of fuzzy expert systems is in the medical field.

Originality/value

Fuzzy logic can be used to manage uncertainty in expert systems and solve problems that cannot be solved effectively with conventional methods. In this study, the authors present a comprehensive review of the methods and applications in fuzzy expert systems which could be useful for practicing managers developing expert systems under uncertainty.

Details

Benchmarking: An International Journal, vol. 27 no. 1
Type: Research Article
ISSN: 1463-5771

Keywords

1 – 9 of 9