Search results

This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand, as well as its mechanism.

was studied through dynamic triaxial tests by means of the GDS dynamic triaxial system on Nanjing sand extensively discovered in the middle and lower reaches of the Yangtze River under seismic load and metro train vibration load, respectively, and potential hazards of the two loads to the freezing construction of Nanjing sand were also identified in the tests.

The results show that under both seismic load and metro train vibration load, freeze-thaw cycles will significantly reduce the stiffness and liquefaction resistance of Nanjing sand, especially in the first freeze-thaw cycle; the more freeze-thaw cycles, the worse structural behaviors of silty-fine sand, and the easier to liquefy; freeze-thaw cycles will increase the sensitivity of Nanjing sand's dynamic pore pressure to dynamic load response; the lower the freezing temperature and the effective confining pressure, the worse the liquefaction resistance of Nanjing sand after freeze-thaw cycles; compared to the metro train vibration load, the seismic load in Nanjing is potentially less dangerous to freezing construction of Nanjing sand.

The research results are helpful to the construction of the artificial ground freezing of the subway crossing passage in the lower reaches of the Yangtze River and to ensure the construction safety of the subway tunnel and its crossing passage.

On-ramp merging areas are typical bottlenecks in the freeway network since merging on-ramp vehicles may cause intensive disturbances on the mainline traffic flow and lead to various negative impacts on traffic efficiency and safety. The connected and autonomous vehicles (CAVs), with their capabilities of real-time communication and precise motion control, hold a great potential to facilitate ramp merging operation through enhanced coordination strategies. This paper aims to present a comprehensive review of the existing ramp merging strategies leveraging CAVs, focusing on the latest trends and developments in the research field.

The review comprehensively covers 44 papers recently published in leading transportation journals. Based on the application context, control strategies are categorized into three categories: merging into sing-lane freeways with total CAVs, merging into sing-lane freeways with mixed traffic flows and merging into multilane freeways.

Relevant literature is reviewed regarding the required technologies, control decision level, applied methods and impacts on traffic performance. More importantly, the authors identify the existing research gaps and provide insightful discussions on the potential and promising directions for future research based on the review, which facilitates further advancement in this research topic.

Many strategies based on the communication and automation capabilities of CAVs have been developed over the past decades, devoted to facilitating the merging/lane-changing maneuvers at freeway on-ramps. Despite the significant progress made, an up-to-date review covering these latest developments is missing to the authors’ best knowledge. This paper conducts a thorough review of the cooperation/coordination strategies that facilitate freeway on-ramp merging using CAVs, focusing on the latest developments in this field. Based on the review, the authors identify the existing research gaps in CAV ramp merging and discuss the potential and promising future research directions to address the gaps.

As a crucial institutional form established since the Chinese economic reform, the system of competitive local governments has been shaping the characteristics of China's socialist market economy to a considerable degree.

This study not only adopts the view of existing studies that attribute the economic motive of local governments to rent and consider land public finance as a means through which local governments carry out strategic investment but also attempts to further develop the view within a Marxist analytical framework.

As a result, the local governments have helped to maintain an incredibly high investment rate over a considerable period of time, facilitating the continuous, rapid growth of the Chinese economy.

This study concludes that China's local governments function as the productive allocator and user of rent in the strategic investment based on land public finance and thereby embed themselves in the relative surplus-value production initially arising from competition amongst enterprises, forming the dual structure of relative surplus-value production unique to China's economy.

This study aims to explore the formation mechanism of aerodynamic noise of a high-speed maglev train and understand the characteristics of dipole and quadrupole sound sources of the maglev train at different speed levels.

Based on large eddy simulation (LES) method and Kirchhoff–Ffowcs Williams and Hawkings (K-FWH) equations, the characteristics of dipole and quadrupole sound sources of maglev trains at different speed levels were simulated and analyzed by constructing reasonable penetrable integral surface.

The spatial disturbance resulting from the separation of the boundary layer in the streamlined area of the tail car is the source of aerodynamic sound of the maglev train. The dipole sources of the train are mainly distributed around the radio terminals of the head and tail cars of the maglev train, the bottom of the arms of the streamlined parts of the head and tail cars and the nose tip area of the streamlined part of the tail car, and the quadrupole sources are mainly distributed in the wake area. When the train runs at three speed levels of 400, 500 and 600 km·h⁻¹, respectively, the radiated energy of quadrupole source is 62.4%, 63.3% and 71.7%, respectively, which exceeds that of dipole sources.

This study can help understand the aerodynamic noise characteristics generated by the high-speed maglev train and provide a reference for the optimization design of its aerodynamic shape.

This paper aims to identify the factors that are constraining technological innovation to support the development of coalbed methane in China.

The analysis applies ideas relating to national and sector systems of innovation to explain why China’s strategies to support research and technological innovation have failed to stimulate the desired progress in coalbed methane production. It also provides a counter-example of the USA that implemented a number of measures in the 1970s that proved very effective.

The deficiencies of China’s research and development strategies in support of coalbed methane development reflect the national and sectoral systems of innovation. They are exacerbated by the structure of the national oil and gas industry. Key constraints include the excessively top-down management of the national R&D agenda, insufficient support for basic research, limited collaboration networks between companies, research institutes and universities and weak mechanisms for diffusion of knowledge. The success of the USA was based on entirely different systems for innovation and in quite a different industrial setting.

The originality of this analysis lies in placing the challenges facing research and innovation for China’s coalbed methane development in the context of the national and sectoral systems for innovation and comparing with the approach and success of the USA.

The purpose of this paper is to understand the determinants affecting the adoption behavior of eCourier services and to establish a moderating role of resistance to change between behavioral intention and actual usage behavior.

Data were collected through a survey questionnaire that was distributed to the eCourier users. A total of 260 collected data were analyzed by using structural equation modeling.

The results of the study demonstrate that all the factors considered for the study have a significant impact on the adoption of eCourier except social influence and customer service. The results also confirm that there is no moderating effect of resistance to change in the relationship between behavioral intention and actual usage.

This research provides theoretical contribution by extending the practical knowledge focusing on the adoption intention of eCourier, and actual usage behavior using Unified Theory of Acceptance and Use of Technology model—a pertinent and unresearched topic in the existing literature that presents a number of potential avenues for further study.

This study provides a general understanding of consumers in underdeveloped nations and advances earlier research on the usage of e-commerce in the courier sector.

This study aims to explore how manufacturing firms master customer lock-in through value creation by servitization innovation strategies from the perspective of asset specificity.

A multiple case study with triangulation fashion is adopted to identify servitization innovation strategies. Several manufacturing firms were investigated, which are distributed in different positions of the value chain. Content analysis and abductive approaches are adopted to analyze the data. Moreover, an in-depth interview and participatory observation were conducted to refine the analysis results.

This study identified four different focusing points of servitization operations. Based on these, the paper further induces an innovative servitization strategy matrix of customer lock-in, concerning communion, intellectual, existential and insubstantial strategies. Furthermore, a conceptual model of customer lock-in by servitization innovation from the perspective of asset specificity is elaborated. It is suggested that companies can use tangible or intangible resources by sharing or storing operations to create servitization value.

This study theoretically proposes a conceptual model to extend servitization innovation as an intangible asset and adopt the new perspective of asset specificity to illustrate the value creation in servitization to generate customer lock-in.

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

In confronting the challenge of climate change and progressing towards dual carbon goals, China is actively implementing low-carbon city pilot policy. This paper aims to focus on the potential impact of this policy on enterprise green governance, aiming to promote the reduction and balance of carbon emissions.

Based on the panel data of China's large-scale industrial enterprises from 2007 to 2013, this paper uses the Difference-in-differences (DID) method to study the impact and path mechanism of the implementation of low-carbon city pilot policy on enterprise green governance. Heterogeneity analysis is used to compare the effects of low-carbon city pilot policy in different regions, different enterprises and different industries.

The low-carbon pilot can indeed effectively enhance corporate green governance, a conclusion that still holds after a series of robustness tests. The low-carbon city pilot policy mainly enhances enterprise green governance through two paths: an industrial structure upgrade and enterprise energy consumption, and it improves green governance by reducing enterprise energy consumption through industrial structure upgrade. The impact of low-carbon city pilot policy on enterprise green governance shows significant differences across different regions, different enterprises and different industries.

This paper examines the impact of low-carbon city pilot policy on enterprise green governance. However, due to availability of data, there are still some limitations to be further tackled. The parallel trend test in this paper shows that the pilot policy has a significant positive effect on the green governance of enterprises. However, due to serious lack of data in some years, the authors only selected the enterprise data of a shorter period as our experimental data, which leads the results to still have certain deficiencies. For the verification of the impact mechanism, the conclusions obtained in this paper are relatively limited. Although all the mechanism tests are passed, the reliability of the results still needs to be further tested through future data samples. In addition, as the pilot policy of low-carbon cities is still in progress, the policy can be tracked and analysed in the future as more data are disclosed, and further research can be carried out through dimensional expansion.

Low-carbon city pilot policy plays an important role in inducing the green governance of enterprises. Therefore, policy makers can continue to strengthen the construction of low-carbon city pilots by refining pilot experience, building typical cases, actively promoting pilot policy experience, expanding pilot scope and enhancing the implementation efficiency of pilot policy nationwide, which will contribute to the optimization and upgrading of the regional industrial structure at the urban level and will provide experience and reference for the synergistic implementation plan of pollution reduction and carbon reduction.

The impact of the low-carbon city pilot policy on enterprise green governance not only exists in two separate paths of urban industrial upgrading and enterprise energy consumption but also exists in a chain transmission path from macro to micro. The authors find that the effect value of each influence path is different, and there is an obvious leading influence path for the role of enterprise green governance. Therefore, in the process of implementing a low-carbon city pilot policy, policies should be designed specifically for different mechanisms. Moreover, complementing and coordinating several paths should be advocated to give full play to the green governance effect of enterprises brought by different paths and to further expand the scope of industries and enterprises where policies play a role.

To the best of the authors’ knowledge, for the first time, this paper connects macro mechanisms with micro mechanisms, discovering a macro-to-micro transmission mechanism in the process of low-carbon city pilot policy affecting enterprise green governance. That is, the low-carbon city pilot policy can facilitate industrial structure upgrading, resulting in reduced enterprise energy consumption, ultimately enhancing enterprise green governance.

Resilience concepts in integrated urban transport refer to the performance of dealing with external shock and the ability to continue to provide transportation services of all modes. A robust transportation resilience is a goal in pursuing transportation sustainability. Under this specified context, while before the perturbations, robustness refers to the degree of the system’s capability of functioning according to its design specifications on integrated modes and routes, redundancy is the degree of duplication of traffic routes and alternative modes to maintain persistency of service in case of perturbations. While after the perturbations, resourcefulness refers to the capacity to identify operational problems in the system, prioritize interventions and mobilize necessary material/ human resources to recover all the routes and modes, rapidity is the speed of complete recovery of all modes and traffic routes in the urban area. These “4R” are the most critical components of urban integrated resilience.

The trends of transportation resilience's connotation, metrics and strategies are summarized from the literature. A framework is introduced on both qualitative characteristics and quantitative metrics of transportation resilience. Using both model-based and mode-free methodologies that measure resilience in attributes, topology and system performance provides a benchmark for evaluating the mechanism of resilience changes during the perturbation. Correspondingly, different pre-perturbation and post-perturbation strategies for enhancing resilience under multi-mode scenarios are reviewed and summarized.

Cyber-physic transportation system (CPS) is a more targeted solution to resilience issues in transportation. A well-designed CPS can be applied to improve transport resilience facing different perturbations. The CPS ensures the independence and integrity of every child element within each functional zone while reacting rapidly.

This paper provides a more comprehensive understanding of transportation resilience in terms of integrated urban transport. The fundamental characteristics and strategies for resilience are summarized and elaborated. As little research has shed light on the resilience concepts in integrated urban transport, the findings from this paper point out the development trend of a resilient transportation system for digital and data-driven management.