Search results

This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand, as well as its mechanism.

was studied through dynamic triaxial tests by means of the GDS dynamic triaxial system on Nanjing sand extensively discovered in the middle and lower reaches of the Yangtze River under seismic load and metro train vibration load, respectively, and potential hazards of the two loads to the freezing construction of Nanjing sand were also identified in the tests.

The results show that under both seismic load and metro train vibration load, freeze-thaw cycles will significantly reduce the stiffness and liquefaction resistance of Nanjing sand, especially in the first freeze-thaw cycle; the more freeze-thaw cycles, the worse structural behaviors of silty-fine sand, and the easier to liquefy; freeze-thaw cycles will increase the sensitivity of Nanjing sand's dynamic pore pressure to dynamic load response; the lower the freezing temperature and the effective confining pressure, the worse the liquefaction resistance of Nanjing sand after freeze-thaw cycles; compared to the metro train vibration load, the seismic load in Nanjing is potentially less dangerous to freezing construction of Nanjing sand.

The research results are helpful to the construction of the artificial ground freezing of the subway crossing passage in the lower reaches of the Yangtze River and to ensure the construction safety of the subway tunnel and its crossing passage.

On-ramp merging areas are typical bottlenecks in the freeway network since merging on-ramp vehicles may cause intensive disturbances on the mainline traffic flow and lead to various negative impacts on traffic efficiency and safety. The connected and autonomous vehicles (CAVs), with their capabilities of real-time communication and precise motion control, hold a great potential to facilitate ramp merging operation through enhanced coordination strategies. This paper aims to present a comprehensive review of the existing ramp merging strategies leveraging CAVs, focusing on the latest trends and developments in the research field.

The review comprehensively covers 44 papers recently published in leading transportation journals. Based on the application context, control strategies are categorized into three categories: merging into sing-lane freeways with total CAVs, merging into sing-lane freeways with mixed traffic flows and merging into multilane freeways.

Relevant literature is reviewed regarding the required technologies, control decision level, applied methods and impacts on traffic performance. More importantly, the authors identify the existing research gaps and provide insightful discussions on the potential and promising directions for future research based on the review, which facilitates further advancement in this research topic.

Many strategies based on the communication and automation capabilities of CAVs have been developed over the past decades, devoted to facilitating the merging/lane-changing maneuvers at freeway on-ramps. Despite the significant progress made, an up-to-date review covering these latest developments is missing to the authors’ best knowledge. This paper conducts a thorough review of the cooperation/coordination strategies that facilitate freeway on-ramp merging using CAVs, focusing on the latest developments in this field. Based on the review, the authors identify the existing research gaps in CAV ramp merging and discuss the potential and promising future research directions to address the gaps.

This paper aims to identify the factors that are constraining technological innovation to support the development of coalbed methane in China.

The analysis applies ideas relating to national and sector systems of innovation to explain why China’s strategies to support research and technological innovation have failed to stimulate the desired progress in coalbed methane production. It also provides a counter-example of the USA that implemented a number of measures in the 1970s that proved very effective.

The deficiencies of China’s research and development strategies in support of coalbed methane development reflect the national and sectoral systems of innovation. They are exacerbated by the structure of the national oil and gas industry. Key constraints include the excessively top-down management of the national R&D agenda, insufficient support for basic research, limited collaboration networks between companies, research institutes and universities and weak mechanisms for diffusion of knowledge. The success of the USA was based on entirely different systems for innovation and in quite a different industrial setting.

The originality of this analysis lies in placing the challenges facing research and innovation for China’s coalbed methane development in the context of the national and sectoral systems for innovation and comparing with the approach and success of the USA.

Resilience concepts in integrated urban transport refer to the performance of dealing with external shock and the ability to continue to provide transportation services of all modes. A robust transportation resilience is a goal in pursuing transportation sustainability. Under this specified context, while before the perturbations, robustness refers to the degree of the system’s capability of functioning according to its design specifications on integrated modes and routes, redundancy is the degree of duplication of traffic routes and alternative modes to maintain persistency of service in case of perturbations. While after the perturbations, resourcefulness refers to the capacity to identify operational problems in the system, prioritize interventions and mobilize necessary material/ human resources to recover all the routes and modes, rapidity is the speed of complete recovery of all modes and traffic routes in the urban area. These “4R” are the most critical components of urban integrated resilience.

The trends of transportation resilience's connotation, metrics and strategies are summarized from the literature. A framework is introduced on both qualitative characteristics and quantitative metrics of transportation resilience. Using both model-based and mode-free methodologies that measure resilience in attributes, topology and system performance provides a benchmark for evaluating the mechanism of resilience changes during the perturbation. Correspondingly, different pre-perturbation and post-perturbation strategies for enhancing resilience under multi-mode scenarios are reviewed and summarized.

Cyber-physic transportation system (CPS) is a more targeted solution to resilience issues in transportation. A well-designed CPS can be applied to improve transport resilience facing different perturbations. The CPS ensures the independence and integrity of every child element within each functional zone while reacting rapidly.

This paper provides a more comprehensive understanding of transportation resilience in terms of integrated urban transport. The fundamental characteristics and strategies for resilience are summarized and elaborated. As little research has shed light on the resilience concepts in integrated urban transport, the findings from this paper point out the development trend of a resilient transportation system for digital and data-driven management.

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

This paper aims to make it convenient for those who have only just begun their research into Community Question Answering (CQA) expert recommendation, and for those who are already concerned with this issue, to ease the extension of our understanding with future research.

In this paper, keywords such as “CQA”, “Social Question Answering”, “expert recommendation”, “question routing” and “expert finding” are used to search major digital libraries. The final sample includes a list of 83 relevant articles authored in academia as well as industry that have been published from January 1, 2008 to March 1, 2019.

This study proposes a comprehensive framework to categorize extant studies into three broad areas of CQA expert recommendation research: understanding profile modeling, recommendation approaches and recommendation system impacts.

This paper focuses on discussing and sorting out the key research issues from these three research genres. Finally, it was found that conflicting and contradictory research results and research gaps in the existing research, and then put forward the urgent research topics.

This editorial proposes three fundamental issues in the international economic field evoked by the US-China trade war. The first is the intensifying conflict between protectionism measures and the coherence with relevant global trade rules. The second is decoupling between the US and China and subsequent evolution in the global production network. The third is the digression in the trade flow between the US and China and the resulting change in innovative capabilities and manufacturing competitiveness among major industrial countries. This editorial also offers the long-term perspective of the current global trade war and how the world encounters repercussion of openness and protectionism as well as times of prosperity and uncertainty.

This study aims to explore how manufacturing firms master customer lock-in through value creation by servitization innovation strategies from the perspective of asset specificity.

A multiple case study with triangulation fashion is adopted to identify servitization innovation strategies. Several manufacturing firms were investigated, which are distributed in different positions of the value chain. Content analysis and abductive approaches are adopted to analyze the data. Moreover, an in-depth interview and participatory observation were conducted to refine the analysis results.

This study identified four different focusing points of servitization operations. Based on these, the paper further induces an innovative servitization strategy matrix of customer lock-in, concerning communion, intellectual, existential and insubstantial strategies. Furthermore, a conceptual model of customer lock-in by servitization innovation from the perspective of asset specificity is elaborated. It is suggested that companies can use tangible or intangible resources by sharing or storing operations to create servitization value.

This study theoretically proposes a conceptual model to extend servitization innovation as an intangible asset and adopt the new perspective of asset specificity to illustrate the value creation in servitization to generate customer lock-in.

This study aims to test the compensatory consumption theory with the explicit hypothesis that China's new-rich tend to waste relatively more food.

In this study, the authors use Heckman two-step probit model to empirically investigate the new-rich consumption behavior related to food waste.

The results show that new-rich is associated with restaurant leftovers and less likely to take them home, which supports the compensatory consumption hypothesis.

Understanding the empirical evidence supporting compensatory consumption theory may improve forecasts, which feed into early warning systems for food insecurity. And it also avoids unreasonable food policies.

This research is a first attempt to place food waste in a compensatory-consumption perspective, which sheds light on a new theory for explaining increasing food waste in developing countries.

The purpose of this paper is to understand the determinants affecting the adoption behavior of eCourier services and to establish a moderating role of resistance to change between behavioral intention and actual usage behavior.

Data were collected through a survey questionnaire that was distributed to the eCourier users. A total of 260 collected data were analyzed by using structural equation modeling.

The results of the study demonstrate that all the factors considered for the study have a significant impact on the adoption of eCourier except social influence and customer service. The results also confirm that there is no moderating effect of resistance to change in the relationship between behavioral intention and actual usage.

This research provides theoretical contribution by extending the practical knowledge focusing on the adoption intention of eCourier, and actual usage behavior using Unified Theory of Acceptance and Use of Technology model—a pertinent and unresearched topic in the existing literature that presents a number of potential avenues for further study.

This study provides a general understanding of consumers in underdeveloped nations and advances earlier research on the usage of e-commerce in the courier sector.