Search results

The unprecedented growth of social media in the past decade has resulted in an increasing interest on social media research. The purpose of this study is to examine the state-of-the-art developments in social media research and to develop a thematic research framework.

The study reviewed 262 social media-related articles published in eight top hospitality and tourism journals between 2007 and 2017. Content analysis was used to code data from the selected articles, and correspondence analysis was then used to compare the characteristics of research conducted on different social media platforms.

A thematic framework of social media research was developed based on a thorough review and systematic examination of the articles. The thematic framework consisted of the three key players – hospitality and tourism businesses, social media platforms and consumers – along with four categories of topical areas – marketing, managerial implication, user-generated content and impact – and 19 research topics. Three platform groups were identified to share similar article characteristics and research attributes.

This study offers a systematic overview of social media research in hospitality and tourism and is the first one to identify triadic relationships of social media platforms in thematic research framework. The innovative findings of correspondence analysis offer insights on future social media research from a platform perspective.

Underactuated fingers are adapted to generate several grasping modes for different tasks, and coupled fingers and self-adaptive fingers are two important types of them. Aiming to expand the application and increase adaptability of robotic hand, this paper aims to propose a novel grasping model, called coupled and indirectly self-adaptive (CISA) grasping model, which is the combination of coupled finger and indirectly self-adaptive finger.

CISA grasping process includes two stages: first, coupled and then indirectly self-adaptive grasping; thus, it is not only integrated with the good pinching ability of coupled finger but also characterized with the high flexibility of indirectly self-adaptive finger. Furthermore, a CISA hand with linkage-slider, called CISA-LS hand, is designed based on the CISA grasping model, consisting of 1 palm, 5 CISA-LS fingers and 14 degrees of freedom.

To research the grasping behavior of CISA-LS hand, kinematic analysis, dynamic analysis and force analysis of 2-joint CISA-LS finger are performed. Results of grasping experiments for different objects demonstrate the high reliability and stability of CISA-LS hand.

CISA fingers integrate two grasping modes, coupled grasping and indirectly self-adaptive grasping, into one finger. And a double-linkage-slider mechanism is designed as the switch device.

This study aims to explore the mediating effect of digital options on the relationship between emerging information technology investments (ITIs) and firm performance (FP). In particular, it analyses the performance impacts of investments in five emerging technologies of IT or non-IT firms.

Secondary data are collected from Chinese A-share listed companies from 2010 to 2018. The authors propose an econometric model focusing on the impact of ITIs on a firm’s market value and profit. A propensity score matching model is applied to control endogeneity.

The ITIs’ effect on FP is found to be completely mediated by digital options, and the reach of digital options plays a more positive role in the relationship between ITIs and Tobin’s Q, whereas the richness of digital options is stronger between ITIs and return on net assets (ROE). The group study shows that the impact of process technologies such as cloud computing and the Internet of Things has a more profound impact on Tobin’s Q, and the knowledge technologies represented by artificial intelligence, blockchain and big data strongly affect ROE. In addition, the positive relationship between ITIs and FP is unrelated to IT/non-IT firms.

First, the data are based on 219 publicly announced emerging ITIs in China and thus may not be generalizable to other cultural/national contexts. Second, there is a lack of a large sample data set of emerging ITI information in China, and the duration of this study is constrained to the relatively short rise of emerging technologies.

This study provides firm decision-makers with practical implications. The results imply that the effect of ITIs on FP depends on digital options, so both IT firms (e.g., Big Tech giants) and non-IT firms (e.g., incumbents) should discover how to balance firm value and profit in their management of emerging technology investment projects with digital options thinking.

To the best of the authors’ knowledge, this is the first empirical study to investigate the relationship between ITIs and FP from the perspective of digital options, exploring five emerging technologies and considering firm life, size, and state ownership in a sample of Chinese listed firms.

The purpose of this paper is to study the effect of temperature on Zn–Ni alloys in ChCl–Urea.

Based on cyclic voltammetry experiments, the deposition behavior and kinetics of the Zn–Ni alloy are studied. The nucleation process of the Zn–Ni alloy is studied in detail via chronoamperometry experiments. The effects of the deposition temperature on the microstructure, Ni content and phase composition of Zn–Ni alloy coatings are investigated via scanning electron microscopy and X-ray diffraction (XRD) combined with classical thermodynamics.

The results show that with increasing temperature, the reduction peak shifts toward a more positive electric potential, which is beneficial for the co-electric deposition process, and the diffusion coefficient is estimated. With increasing temperature, the nucleation process of the Zn–Ni alloy becomes a three-dimensional instantaneous nucleation, the typical kinetic parameters are determined using the standard 3D growth proliferation control model and the Gibbs free energy is estimated. The Zn–Ni alloy coatings are prepared via normal co-deposition. With increasing temperature, the degree of crystallinity increases, the coating gradually becomes uniform and compact and the XRD peak intensity increases.

The nucleation process of the Zn–Ni alloy at different temperatures is analyzed. The diffusion coefficient D and Gibbs free energy are calculated. The contribution of the three processes at different temperatures is analyzed. The effect of temperature on the morphology of the Zn–Ni alloy coatings is studied.

This paper aims to study the corrosion inhibition behavior of imidazopyridine and its three derivatives on brass.

The authors performed weight loss experiments, electrochemical experiments including the polarization curve and electrochemical impedance spectrum, corrosion morphology observation using scanning electron microscope (SEM) and atomic force microscope (AFM) and surface composition analysis via X-ray photoelectron spectroscopy (XPS) to analyze the corrosion inhibition behavior of imidazopyridine and its three derivatives on brass by using quantum chemical calculation (Gaussian 09), molecular dynamics simulation (M-S) and Langmuir adsorption isotherm.

According to the results, imidazole-pyridine and its derivatives were found to be modest or moderately mixed corrosion inhibitors; moreover, they were spontaneously adsorbed on the metal surface in a single-layer, mixed adsorption mode.

The corrosion inhibition properties of pyrazolo-[1,2-a]pyridine and its derivatives on brass in sulfuric acid solution were analyzed through weight loss and electrochemical experiments. Moreover, SEM and AFM were simultaneously used to observe the corrosion appearance. Furthermore, XPS was used to analyze the surface. Then, Gaussian 09 and M-S were combined along with the Langmuir adsorption isotherm to investigate the corrosion inhibition mechanism of imidazole-[1,2-a]pyridine and its derivatives.

The purpose of this work is to provide theoretical guidance and experimental analysis for optimized cathodic protection (CP) design of low alloy steel in deep water environments.

In the present study, the CP criteria of 10Ni5CrMoV low alloy steel were investigated in a simulated deep water environment (350 m) regarding the theoretical protection potential and measured protection potential. The influences of hydrostatic pressure (HP) and temperature were also discussed in detail. The theoretical protection potential was analyzed with the Nernst equation, and the measured minimum protection potential was derived by extrapolating the Tafel portion of anodic polarization curves.

The results indicate that the minimum protection potential of low alloy steel shifts to a positive value in a deep-ocean environment. This can be attributed to the combined effects of HP and the temperature. Moreover, the temperature has a stronger influence compared with HP. The results suggest that the CP potential criteria used in shallow water are still applicable in the deep ocean, which is further confirmed through the SEM and x-ray diffraction analysis of the corrosion products resulted from the potentiostatic cathodic polarization experiments at −0.85 V_CSE.

In recent decades, successful applications of CP for long-term corrosion protection of the steel components applied at a subsea level have enabled the offshore industry to develop reliable and optimized CP systems for shallow water. However, differences in the seawater environment at greater depths have raised concerns regarding the applicability of the existing CP design for deeper water environments. Hence, this research focuses on the CP criteria of low alloy steel in simulated deep water environment concerning the theoretical protection potential and measured protection potential. The influences of HP and temperature were also discussed.

This paper aims to investigate the influence of different post-annealing cooling conditions, i.e. furnace cooling (heat treatment (HT) 1 – slow cooling) and air cooling (HT 2 – fast cooling), on the microstructure and mechanical properties of selective laser melting (SLM) built austenitic 316L stainless steel (SS).

Three sets of 316L SS samples were fabricated using a machine standard scanning strategy. Each set consists of three tensile samples and a cubic sample for microstructural investigations. Two sets were subsequently subjected to annealing HT with different cooling conditions, i.e. HT 1 and HT 2, whereas one set was used in the as-built (AB) condition. The standard metallographic techniques of X-ray diffraction, scanning electron microscopy and electron back-scattered diffraction were used to investigate the microstructural variations induced by different cooling conditions. The resultant changes in mechanical properties were also investigated.

The phase change of SLM fabricated 316L was observed to be independent of the investigated cooling conditions and all samples consist of austenite phase only. Both HT 1 and HT 2 lead to dissolved characteristic melt pools of SLM. Noticeable increase in grain size of HT 1 and HT 2 samples was also observed. Compared with AB samples, the grain size of HT 1 and HT 2 was increased by 12.5% and 50%, respectively. A decreased hardness and strength, along with an increased ductility was also observed for HT 2 samples compared with HT 1 and AB samples.

From previous studies, it has been noticed that most investigations on HT of SLM fabricated 316L were mainly focused on the HT temperature or holding time. However, the post-HT cooling rate is also an equally important factor in deciding the microstructure and mechanical properties of heat-treated components. Therefore, this paper investigates the influence of different post-annealing cooling conditions on microstructure and mechanical properties of SLM fabricated 316L components. This study provides a foundation for considering the post-HT cooling rate as an influential parameter that controls the properties of heat-treated SLM components.

As the pandemic begins to ease, many companies are figuring out that working remotely is the future of work and “a new normal”. This research focuses on strategic planning and practices inherent in remote work, and aims to identify the optimal balance between virtual and on-site working. Specifically, the authors investigate the moderating effects of managerial ability and Hofstede's cultural factors.

The authors build a mathematical model to locate the optimal balance between virtual and on-site working. A numerical study is presented, and additional sensitivity analysis is conducted to validate the proposed model.

This model provides organizations with a general guideline with recommended optimal percentages of remote workforce based on specific Hofstede's national scores. The authors also find that organizations with varying levels of managerial ability exhibit different adoption rates of remote working.

Because of the chosen research approach, the proposed model may lack empirical verification and require further adjustment of parameters. Therefore, researchers are encouraged to empirically and statistically test the proposed model further.

This model equips organizations and practitioners with a general guideline to identify their desired portion of remote workforce. The incorporation of managerial ability and cultural factors makes our model applicable to various business structures across different sectors.

This proposed model addresses this optimization problem from a mathematical perspective with an interdisciplinary approach. The model also considers the moderating effects of managerial ability and Hofstede's cultural factors.

1. The main contribution of this study is the theoretical development of our mathematical model that identifies the optimal balance between remote and on-site workforce in the context of managerial ability and Hofstede's cultural factors.

2. A numerical study is presented, and additional sensitivity analysis is conducted to validate the proposed model and highlight the moderating effect of managerial ability and cultural influence on the adopted percentages of remote working.

3. Our study suggests that organizational capabilities, managerial skills, and culturally suitable work arrangement are vital in successful development and implementation of remote working policy.

4. Practical managerial implications and general guidelines are offered to organizations and practitioners.

The main contribution of this study is the theoretical development of our mathematical model that identifies the optimal balance between remote and on-site workforce in the context of managerial ability and Hofstede's cultural factors.

A numerical study is presented, and additional sensitivity analysis is conducted to validate the proposed model and highlight the moderating effect of managerial ability and cultural influence on the adopted percentages of remote working.

Our study suggests that organizational capabilities, managerial skills, and culturally suitable work arrangement are vital in successful development and implementation of remote working policy.

Practical managerial implications and general guidelines are offered to organizations and practitioners.

This study aims to examine the empirical linkages among emotional experiences, national identity and behavioural intentions for red tourism in China.

Partial least squares structural equation modelling was applied to data from two rounds of surveys of 1,095 on-site visitors to Zunyi and Yan’an, two well-known red tourism cities in China.

Emotional experiences significantly affect national identity, with positive emotions significantly affecting national identity. Positive emotions also significantly influenced behavioural intentions, national identity positively influenced behavioural intentions and national pride mediated the relationship of “positive emotion → behavioural intentions”. In addition, previous experience played a moderating role in the relationship of “positive emotion → national pride”.

This research produced new insights on red tourism emotional experiences by clarifying its types, connotations and influences. It contributes to a better understanding of national identity antecedents and outcomes in red tourism. Findings revealed the significant role of red tourism in cultivating national identity and provide implications for academic research and practical development of red tourism.

本研究旨在考察中国红色旅游者的情绪体验、国家认同和行为意向之间的影响关系及其作用机制。

采用偏最小二乘法结构方程模型(PLS-SEM), 对来自中国红色旅游圣地——遵义和延安的1095名现场游客的问卷调查数据进行了统计分析。

情绪体验对国家认同会产生显著影响。其中, 积极情感会显著正向影响国家认同。同时, 积极情感也会对行为意向产生显著正向影响。此外, 国家认同对行为意向具有积极影响, 且国家自豪感在“积极情感→行为意图”的影响关系中充当中介作用。最后, 研究还发现旅游经历在“积极情感→国家自豪感”的影响关系中具有显著的调节作用。

本研究通过阐明红色旅游情绪体验的类型、内涵及其影响关系, 为深入理解红色旅游情绪体验提供了一个全新的视角。同时, 文章还进一步厘清了红色旅游情境中国家认同感的形成前因和影响结果的作用机理。研究结论揭示了红色旅游在培育国家认同感方面的重要价值, 并为红色旅游的学术研究和实践发展提供了重要启示。

Esta investigación examinó los vínculos empíricos entre las experiencias emocionales, la identidad nacional y las intenciones de comportamiento para del turismo rojo en China.

Se aplicó el análisis de ecuaciones estructurales basado en mínimos cuadrados parciales (PLS - SEM) a los datos recogidos mediante dos rondas de encuestas realizadasa 1.095 visitantes in situ en Zunyi y Yan'an, dos conocidas ciudades de turismo rojo de China.

Las experiencias emocionales afectan significativamente a la identidad nacional, y las emociones positivas influyen significativamente en la identidad nacional. Las emociones positivas también influyeron significativamente en las intenciones de comportamiento; la identidad nacional influyó positivamente en las intenciones de comportamiento y el orgullo nacional medió la relación “emoción positiva → intenciones de comportamiento”. Además, la experiencia previa desempeñó un papel moderador en la relación “emoción positiva → orgullo nacional”.

Esta investigación aportó nuevos hallazgos sobre las experiencias emocionales del turismo rojo al aclarar sus tipos, connotaciones e influencias. Contribuye a una mejor comprensión de los antecedentes y resultados de la identidad nacional en el turismo rojo. Los resultados de la investigación revelan el importante papel del turismo rojo en el cultivo de la identidad nacional y ofrecen implicaciones para la investigación académica y el desarrollo práctico del turismo rojo.

This paper aims to study the attitude control problem with mutating orbital rate and actuator fading.

To avoid malicious physical attacks and hide itself, the spacecraft may irregularly switch its orbit altitude within a specific range, which will bring about variations in orbital rate, thereby causing mutations in the attitude dynamics model. The actuator faults will also cause changes in system dynamics. Both factors affect the control performance. First, this paper determines the potential switching orbits. Then under different conditions, design controllers that can accommodate actuator faults according to the statistical law of actuator fading.

This paper, to the best of the authors’ knowledge, for the first time, introduces the Markovian jump framework to model the possible unexpected mutating of orbital rate and actuator fading of spacecraft and then designs a novel control policy to solve the attitude control problem.

This paper also provides the algorithm design processes in detail. A comparative numerical simulation is given to verify the effectiveness of the proposed algorithm.

This is an early solution for spacecraft attitude control with dynamics model mutations.