Search results

This study examines the recovery of households after disasters from the sustainable livelihood approach (SLA) perspective.

This study analyzes the perception of recovery by using a longitudinal household survey data set collected from a Chinese county devastated by the 2008 Wenchuan earthquake. The analysis compares the changes of livelihood capitals (financial, natural, physical, social, human) between 2012 and 2009 and recovery perception.

The results demonstrate that both the current status of financial, natural, and social capital and the changes of the capitals between 2009 and 2012 are positively correlated with the perceived level of recovery. The associations between the current status and the change of physical capital and recovery perception are insignificant. In contrast, with a greater change of human capital between 2009 and 2012, participants have a lower perception of recovery.

By investigating a longitudinal data, this study indicates that (1) household recovery should be considered as multidimensional, (2) the SLA could be a feasible framework to measure recovery, and (3) individual's recovery perception is dependent on the various dimensions of recovery measures.

The purpose of this paper is to apply what can be learned from the emergence of nature tourism to understand some current and future trends of tourism.

This study adopted the evolutionary paradigm for investigation.

The emergence of nature tourism in early medieval China can be attributed to four major factors, including transformation of value orientations, seeking longevity, interest in suburbs and population migration.

Historical studies help understand the current and future trends. When the contributing factors for nature tourism are linked to the contemporary world, it can be found that these factors are still playing a part in shaping tourism trends or patterns in their original or alternative forms. These trends or patterns are worthy of scholarly investigations.

This paper offers a comprehensive understanding of the origins of nature tourism.

The purpose of this paper is to demonstrate a novel 3D system-in-package (SiP) approach. This new packaging approach is based on stacked silicon submount technology. As demonstrators, a smart lighting module and a sensor systems were successfully developed by using the fabrication and assembly process described in this paper.

The stacked module consists of multiple layers of silicon submounts which can be designed and fabricated in parallel. The 3D stacking design offers higher silicon efficiency and miniaturized package form factor. This platform consists of silicon submount design and fabrication, module packaging, system assembling and testing and analyzing.

In this paper, a smart light emitting diode system and sensor system will be described based on stacked silicon submount and 3D SiP technology. The integrated smart lighting module meets the optical requirements of general lighting applications. The developed SiP design is also implemented into the miniaturization of particular matter sensors and gas sensor detection system.

SiP has great potential of integrating multiple components into a single compact package, which has potential implementation in intelligent applications.

The purpose of this paper is to maraging 18Ni-300 steel fabricate by powder bed based selective laser melting (SLM) process. Microstructure and mechanical properties of the maraging steel part before and after heat treatment at a slow cooling rate were investigated.

The microstructure of the printed part was observed by optical microscopy and scanning electron microscopy. The phases were determined by X-ray diffraction. The surface roughness of the part was recorded by a profilometer. The tensile properties and microhardness of the parts before and after heat treatment were characterized by an electronic universal tensile testing machine and a Vickers hardness tester, respectively.

Maraging 18Ni-300 steel part comprised of the martensitic phase and a small fraction of austenite phase. After heat treatment, the volume fraction of austenite slightly increased. The surface roughness of the part was about 96 µm. The printed part was dense, but irregular pores were present. The yield strength, ultimate tensile strength (UTS), elongation and Young’s modulus of as-fabricated parts were 554.7 MPa, 1173.1 MPa, 10.9% and 128.9 GPa, respectively. The yield strength, UTS, elongation and Young’s modulus of as-treated parts were 2065 MPa, 2225 MPa, 4.2% and 142.5 GPa, respectively. The microhardness values of surface and cross-section of the as-fabricated part were 407.1 HV and 443.0 HV, respectively. After short-time heat treatment, the microhardness values of the surface and cross-section of the part were 542.7 HV and 567.3 HV, respectively. After long-time heat treatment, the microhardness values of the surface and cross-section of the part were 524.4 HV and 454.8 HV, respectively. The microhardness and tensile strength increased significantly with decreasing elongation due to the changes in phases and microstructure of the parts after heat treatment.

This work studied the effect of heat treatment at 550°C combined with a subsequent slow cooling rate on microstructure and mechanical properties of maraging 18Ni-300 steel obtained by the powder bed based SLM process.

This study aims to manufacture cotton fabric with thermal regulation performance by using the composite phase change material (CPCM) prepared by coating paraffin doped with expanded graphite (EG), and the thermal effect of the fabric material was evaluated and characterized.

EG/paraffin CPCM with shape stability and enhanced thermal conductivity were prepared by the impregnation method and then finished on the surface of cotton fabric with coating technology. The microstructure, crystal structure, chemical composition, latent heat property and thermal conductivity were analyzed by scanning electron microscope, x-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimeter and thermal constant analyzer. The photo-thermal effect of the coated fabric was studied by a thermal infrared imager.

CPCM prepared with a mass ratio of EG to paraffin of 1:8 showed excellent shape stability and low paraffin leakage rate. The latent heat of the CPCM was 51.6201 J/g and the thermal conductivity coefficient was increased by 11.4 times compared with the mixed paraffin. After the CPCM was coated on the surface of the cotton fabric, the light-to-heat conversion rate of the C-EG/PA3 sample was improved by 86.32% compared with the original fabric. In addition, the coated fabric showed excellent thermal stability and heat storage performance in the thermal cycling test.

EG can improve the shape stability and thermal conductivity of paraffin but will reduce the latent heat energy.

The method developed provided a simple and practical solution to improving the thermal regulation performance of fabrics.

Combining paraffin wax with fabrics in a composite way is innovative and has certain applicability in improving the thermal properties of fabrics.

The purpose of this paper is to shed light on the different perceptions of entrepreneurial orientation (EO) of females compared to those of their male counterparts. EO and its links to performance are examined at the level of both the individual and the firm.

Multiple linear regression analyses of a data set with 301 employees in different industries reveal significant differences between genders.

EO has a positive impact on performance at both individual and firm levels of analysis. Females tend to perceive their individual EO as lower than males, but their self-evaluated work performance is higher than that of males. The firm’s EO is also perceived differently by men and by women, but the perceptions of firm’s performance are similar.

The results draw attention to the differences between individuals when they evaluate firm-level constructs like EO. While the sample is based on a small number of firms, the findings suggest that EO is neither pervasive throughout the firm nor gender-neutral.

The different gender-related perceptions should be kept in mind when promoting entrepreneurially oriented behaviour within organizations. A strong focus on EO in entrepreneurship policy or education may discourage women.

So far, multi-level organizational interrelationships have been substantially neglected with respect to the gender dimension.