Search results

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

The marketisation of higher education fosters the notion of students as consumers, highlighting the shifting dynamics of student–teacher relationships. This paper aims to contribute to ongoing discussions about students as consumers and their involvement in pedagogical practices. We explore students’ experiences in short-term study abroad (SA) programmes that involve collaborative learning, examining how a consumerism-oriented approach affects students’ perceptions of their pedagogical identities and student–teacher pedagogical relationships.

A qualitative exploratory study was conducted to capture students’ rich and subjective perceptions and experiences. The data were gathered through semi-structured interviews with 15 Chinese undergraduate students who participated in a short-term SA programme at a UK university. Following data translation and transcription, a thematic analysis approach facilitated our exploration.

Chinese students engage in SA programmes as a strategic investment in personal growth and transformation, with their consumer-oriented identity fostering a mutually beneficial relationship with educators and group members. This consumer mindset appears to enhance active student engagement and, to some extent, create reciprocal student–teacher interactions through power sharing and collaborative involvement.

This study presents empirical data exploring the impact of consumer identity on the dynamics of student–teacher relationships in the SA context. It provides recommendations for implementing pedagogical approaches designed to mediate the influence of consumerism on student engagement, particularly in shaping collaborative student–teacher relationships. This study offers insights for future research on the effects of consumerism in higher education within cross-cultural contexts.

Aluminum alloy is considered an ideal material in aerospace, automobile and other fields because of its lightweight, high specific strength and easy processing. However, low hardness and strength of the surface of aluminum alloys are the main factors that limit their applications. The purpose of this study is to obtain a composite coating with high hardness and lubricating properties by applying GO–PVA over MAO coating.

A pulsed bipolar power supply was used as power supply to prepare the micro-arc oxidation (MAO) coating on 6061 aluminum sample. Then a graphene oxide-polyvinyl alcohol (GO–PVA) composite coating was prepared on MAO coating for subsequent experiments. Samples were characterized by Fourier infrared spectroscopy, X-ray diffraction, Raman spectroscopy and thermogravimetric analysis. The friction test is carried out by the relative movement of the copper ball and the aluminum disk on the friction tester.

Results showed that the friction coefficient of MAO samples was reduced by 80% after treated with GO–PVA composite film.

This research has made a certain contribution to the surface hardness and tribological issues involved in the lightweight design of aluminum alloys.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0427/

This study investigates how to motivate behavioral intentions toward green investment (BIGI) with the moderating effect of social media platforms usage (SMPU) among individual investors in Egypt.

The study used partial least squares structural equation modeling (PLS-SEM) to analyze the data and test hypotheses based on a sample of 550 individual investors with investment experience.

The results show that attitude, subjective norm (SN), and perceived behavioral control (PBC) have a significant relationship with investors' behavioral intention toward green investment. The moderating effect of (SMPU) supported the relationship between (SN), (PBC), and (BIGI), but (SMPU) does not support the relationship between attitude and (BIGI).

This study provides some implications for investment providers, service providers, and policymakers.

Despite the increasing global interest in climate change and its consequent opportunities and challenges for business, previous studies did not strongly emphasize green investment. So, based on the theory of planned behavior (TPB), this study sheds light on the motivational factors that may push investors' behavioral intentions toward green investment. With the increasing interest in digital transformation, the study also examined how digital platforms support (BIGI), especially in Egypt as a developing country.

With the growing concern of various sectors of society regarding environmental issues and the promotion of sustainable development, green technology innovation is generally considered to be conducive to the long-term development of enterprises. However, because of the existence of agency problems, managers may have shortsighted behaviors. Then how will managers' shortsighted behaviors affect enterprises' green technology innovation?

This paper uses machine learning-based text analysis methods to construct a manager myopia index based on the data from A-share listed companies on the Shanghai and Shenzhen Stock Exchanges from 2015 to 2020. We examine the impact of manager myopia on green technology innovation in companies.

Our study finds that manager myopia significantly inhibits green technology innovation in companies. However, when multiple large shareholders coexist and the proportion of institutional investors' holdings is high, it can alleviate the inhibitory effect of manager myopia on green innovation. Heterogeneity tests show that the impact of manager myopia on green technology innovation is relatively significant in non-state-owned and manufacturing companies, as well as in the electricity industry. Robustness tests demonstrate that our conclusions remain valid after using propensity score matching to eliminate endogeneity problems.

From the perspective of corporate governance, this paper incorporates managers' shortsightedness, multiple large shareholders and institutional investors' shareholding ratios into the same logical framework, analyzes their internal mechanisms, helps improve corporate governance, enhances green innovation capabilities and has strong implications for the implementation of national innovation-driven development strategies and the achievement of “carbon peak” and “carbon neutrality” targets.

The purpose of this research is to achieve multi-task autonomous driving by adjusting the network architecture of the model. Meanwhile, after achieving multi-task autonomous driving, the authors found that the trained neural network model performs poorly in untrained scenarios. Therefore, the authors proposed to improve the transfer efficiency of the model for new scenarios through transfer learning.

First, the authors achieved multi-task autonomous driving by training a model combining convolutional neural network and different structured long short-term memory (LSTM) layers. Second, the authors achieved fast transfer of neural network models in new scenarios by cross-model transfer learning. Finally, the authors combined data collection and data labeling to improve the efficiency of deep learning. Furthermore, the authors verified that the model has good robustness through light and shadow test.

This research achieved road tracking, real-time acceleration–deceleration, obstacle avoidance and left/right sign recognition. The model proposed by the authors (UniBiCLSTM) outperforms the existing models tested with model cars in terms of autonomous driving performance. Furthermore, the CMTL-UniBiCL-RL model trained by the authors through cross-model transfer learning improves the efficiency of model adaptation to new scenarios. Meanwhile, this research proposed an automatic data annotation method, which can save 1/4 of the time for deep learning.

This research provided novel solutions in the achievement of multi-task autonomous driving and neural network model scenario for transfer learning. The experiment was achieved on a single camera with an embedded chip and a scale model car, which is expected to simplify the hardware for autonomous driving.

This paper aims to propose a robust method for non-rigid point set registration, using the Gaussian mixture model and accommodating non-rigid transformations. The posterior probabilities of the mixture model are determined through the proposed integrated feature divergence.

The method involves an alternating two-step framework, comprising correspondence estimation and subsequent transformation updating. For correspondence estimation, integrated feature divergences including both global and local features, are coupled with deterministic annealing to address the non-convexity problem of registration. For transformation updating, the expectation-maximization iteration scheme is introduced to iteratively refine correspondence and transformation estimation until convergence.

The experiments confirm that the proposed registration approach exhibits remarkable robustness on deformation, noise, outliers and occlusion for both 2D and 3D point clouds. Furthermore, the proposed method outperforms existing analogous algorithms in terms of time complexity. Application of stabilizing and securing intermodal containers loaded on ships is performed. The results demonstrate that the proposed registration framework exhibits excellent adaptability for real-scan point clouds, and achieves comparatively superior alignments in a shorter time.

The integrated feature divergence, involving both global and local information of points, is proven to be an effective indicator for measuring the reliability of point correspondences. This inclusion prevents premature convergence, resulting in more robust registration results for our proposed method. Simultaneously, the total operating time is reduced due to a lower number of iterations.

The aim of this review is to present together the studies on textile-based moisture sensors developed using innovative technologies in recent years.

The integration levels of the sensors studied with the textile materials are changing. Some research teams have used a combination of printing and textile technologies to produce sensors, while a group of researchers have used traditional technologies such as weaving and embroidery. Others have taken advantage of new technologies such as electro-spinning, polymerization and other techniques. In this way, they tried to combine the good working efficiency of the sensors and the flexibility of the textile. All these approaches are presented in this article.

The presentation of the latest technologies used to develop textile sensors together will give researchers an idea about new studies that can be done on highly sensitive and efficient textile-based moisture sensor systems.

In this paper humidity sensors have been explained in terms of measuring principle as capacitive and resistive. Then, studies conducted in the last 20 years on the textile-based humidity sensors have been presented in detail. This is a comprehensive review study that presents the latest developments together in this area for researchers.

The purpose of this study is to examine the impact of political relations on trade in strategic emerging industries (SEIs) in the Belt and Road initiative (BRI) associated countries. This investigation encompasses not only from the perspective of bilateral political relations but also the political intervention of third parties.

The study employs the temporal exponential random graphmodel to analyze the dynamic structure and influencing factor of SEIs trade network among 150 BRI-associated countries from 2015 to 2020.

The results indicate that the trade of SEIs in the BRI-associated countries exhibits a pattern of concentrated exporters and decentralized importers. Amicable bilateral political relations foster trade cooperations in SEIs, while political pressure from the United States has the opposite effect. Furthermore, compared with the influence of third parties, the BRI has created a more robust trade environment characterized by political mutual trust.

BRI-associated countries should strengthen their political communication, and endeavor to transform political consensus and shared vision into concrete collaborative projects, while mitigating geopolitical uncertainties through a sound risk evaluation system. Moreover, they should establish a more transparent and consistent consultation mechanism and leverage the BRI trade network to foster balanced and mutually beneficial partnerships that minimize rivalry and dependence on a single market.

This study goes beyond observed trade cost and incorporates the political factor into the determinants of the BRI trade, thereby expanding the theoretical boundaries of existing BRI research. Also, this study employs bilateral trade data to construct SEIs trade networks (SEITNs) along the BRI route. It provides a comprehensive understanding of the dynamic determinates of the SEITNs will provide valuable practical guidance for enhancing and expanding trade and cooperation among BRI-associated countries.