Search results
1 – 10 of 156Eduardo Tejedor Tejada, Domiciana De la Fuente Marcos, Maria Jesus Cuesta Lozano, Juana Benedí González, Jesús Moro Aguado and Jesús Miguel Tejedor Muñoz
This study aims to assess the potency and dose of Δ-9-Tetrahidrocannabinol (THC) and Cannabidiol (CBD) in cannabis joints. This will enable better estimates of the degree of…
Abstract
Purpose
This study aims to assess the potency and dose of Δ-9-Tetrahidrocannabinol (THC) and Cannabidiol (CBD) in cannabis joints. This will enable better estimates of the degree of exposure in a user and contribute towards a better understanding of potential harmful effects.
Design/methodology/approach
Analysis of intact joints confiscated by law enforcement on the street in the autonomous region of Castilla y León (Spain) during the years 2017–2019.
Findings
This study analysed THC, CBN and CBD in marijuana joints (N = 744). Joints contain cannabis and tobacco (N = 729), had a median net weight 0.69 g (IQR = 0.28); concentration THC median was 6.30%(IQR = 4.51) and THC median dose 42 mg (IQR = 32.75). A total of 35.5% mixed joints contained CBN – median percentage 0.61% (IQR = 0.51). CBD was detected 10.3% of mixed joints – median percentage 0.13% (IQR = 0.12) and median dose 1 mg (IQR = 0.92). CBD/THC ratio presented median value of 0.02 (IQR = 0.02). The samples analysed comprised pure cannabis joints (N = 15), with THC median 11.86% (IWR = 6.30) or median dose of 118 mg.
Originality/value
The study found high values for concentration and dose of THC and CBD in cannabis joints, warning of high exposures for the user and associated potential consequences. The results obtained contribute new perspectives on the definition of a standard cannabis unit.
Details
Keywords
Tomas Lopez-Guzman, Jesús Claudio Pérez Gálvez, Guzmán Antonio Muñoz-Fernández and Miguel Jesús Medina-Viruel
The purpose of this paper is to conduct an analysis of the relationships existing among three basic constructs in the visitor’s decision-making process (motivation and…
Abstract
Purpose
The purpose of this paper is to conduct an analysis of the relationships existing among three basic constructs in the visitor’s decision-making process (motivation and satisfaction) in a tourist destination that is a World Heritage Site, such as the city of Cordoba (Spain). Bearing in mind the perception of heritage by the foreign visitors, the following four types were determined: alternative tourists, cultural tourists, emotional tourists and heritage tourists.
Design/methodology/approach
This paper uses the multivariate technique of grouping cases (K-means clusters) to analyse the similarity existing among the surveyed persons. From the groups or segments obtained, statistics and measurements of association were applied that provide the information necessary to study the possible trends of association existing between variables from a table of bidimensional contingencies. In the same way, non-parametric statistical procedures were used (Kruskal–Wallis H test and the Mann–Whitney U test).
Findings
The results show the existence of four diverse motivational dimensions among the foreign tourists to visit it: hedonic, cultural, convenience and circumstantial. Of the four dimensions, the hedonic and the cultural are the most relevant. The results show the existence of a common cultural identity: the Arabic cultural identity.
Originality/value
This paper contributes to complete the academic literature existing on the links of the tourist with the historical and monumental heritage that he visits, and with the tourist’s behaviour.
Details
Keywords
Tomás López-Guzmán, Jesús Claudio Pérez Gálvez, Franklin Cordova Buiza and Miguel Jesús Medina-Viruel
The purpose of this paper is to conduct an analysis of the relationships existing among three basic constructs in the visitor’s decision-making process (motivation and…
Abstract
Purpose
The purpose of this paper is to conduct an analysis of the relationships existing among three basic constructs in the visitor’s decision-making process (motivation and satisfaction) in a tourist destination that is a World Heritage Site, such as the city of Lima (Peru). Bearing in mind the perception of heritage by the foreign visitors, four types of tourists were determined: alternative tourists, cultural tourists, emotional tourists and heritage tourists.
Design/methodology/approach
This research uses the multivariate technique of grouping cases (K-means clusters) to analyse the similarity existing among the surveyed persons. From the groups or segments obtained, statistics and measurements of association were applied, which provide the information necessary to study the possible trends of association existing between variables from a table of bidimensional contingencies. In the same way, nonparametric statistical procedures were used (Kruskal–Wallis H test and the Mann–Whitney U test) with the aim of analysing significant differences among groups of the sample.
Findings
The results show the existence of four diverse motivational dimensions among the foreign tourists to visit Lima: hedonic, cultural, convenience and circumstantial. Of the four dimensions, the cultural aspect is the most relevant. The results show the existence of a specific Ibero-American heritage and cultural identity.
Originality/value
This paper contributes to the academic literature on the links of the tourist with the historical and monumental heritage location(s) visited by the tourist and the tourist’s behaviour while visiting the site. In fact, it is one of the first investigations carried out on this subject in Latin America.
Details
Keywords
Francisco José Fernández-Cruz, Jesús Miguel Rodríguez-Mantilla and Mª José Fernández Díaz
Recently, the application of quality management systems (QMS) in educational institutions has become widespread, in an effort to improve diverse processes and results in schools…
Abstract
Purpose
Recently, the application of quality management systems (QMS) in educational institutions has become widespread, in an effort to improve diverse processes and results in schools. However, there are very few studies that enable us to confirm whether these QMS bring true changes that are sustainable over time and lead to improvements in these institutions.
Design/methodology/approach
This study thus aims to assess the impact of the implementation of ISO:9001 standards on school climate and on the satisfaction of the members of the educational community at 80 Spanish preschools, primary and secondary schools in different autonomous communities.
Findings
The analyses performed show conclusive results regarding the impact of ISO:9001 standards on teachers' involvement in improving the school's climate, conflict resolution by the management team and in families' involvement and satisfaction with the school. However, no apparent evidence was found of the impact on relations among teachers, conflict resolution among staff members and the perception of satisfaction by the teachers themselves.
Research limitations/implications
We must bear in mind that the results and conclusions obtained are based on the instrument developed for this study, where it has been the members of the schools themselves who have assessed the changes they have perceived or that have taken place. However, due to the limitation of the instrument, it could be complemented in future research with external evaluations that could complement the results obtained in the present study.
Originality/value
Furthermore, greater impact of the ISO standards was identified in schools from certain regions (Valencia and Andalusia), in state-assisted private schools, in smaller schools and in institutions which have been implementing the QMS for longer periods of time. The management team also perceived a greater improvement in climate than did teachers.
Details
Keywords
Francisco José Fernández-Cruz, Jesús Miguel Rodríguez-Mantilla and Ma José Fernández-Díaz
A growing number of schools are now implementing quality management systems (QMS). As a result, studies are being conducted to assess the educational benefits of these systems and…
Abstract
Purpose
A growing number of schools are now implementing quality management systems (QMS). As a result, studies are being conducted to assess the educational benefits of these systems and their capacity to identify areas for improvement in school processes and performance. The purpose the present study is to assess the impact of ISO:9001 implementation on teaching-learning processes in the classroom, and in schools with at least three years’ experience of applying this standard.
Design/methodology/approach
To this end, a questionnaire was administered to a final sample of 2,185 subjects from 80 pre-school, primary and secondary education schools in the regions of Madrid, Castile and León, Andalusia and Valencia (Spain).
Findings
The results show that ISO:9001 implementation yielded a higher than average impact on teaching-learning processes. Specifically, improvements were observed in the subdomains of tutorials, evaluation and classroom teaching methodologies as a result of implementing this QMS.
Originality/value
This impact was higher in state-subsidized private schools in Valencia and Andalusia with over nine years’ experience of ISO:9001 in schools with internal funding plans and in those with fewer than 29 teachers on the staff.
Details
Keywords
Jesús Miguel Chacón, Miguel Ángel Caminero, Pedro José Núñez, Eustaquio García-Plaza and Jean Paul Bécar
Fused filament fabrication (FFF) is one of the most popular additive manufacturing (AM) technologies due to its ability to build thermoplastic parts with complex geometries at low…
Abstract
Purpose
Fused filament fabrication (FFF) is one of the most popular additive manufacturing (AM) technologies due to its ability to build thermoplastic parts with complex geometries at low cost. The FFF technique has been mainly used for rapid prototyping owing to the poor mechanical and geometrical properties of pure thermoplastic parts. However, both the development of new fibre-reinforced filaments with improved mechanical properties, and more accurate composite 3D printers have broadened the scope of FFF applications to functional components. FFF is a complex process with a large number of parameters influencing product quality and mechanical properties, and the effects of the combined parameters are usually difficult to evaluate. An array of parameter combinations has been analysed for improving the mechanical performance of thermoplastic parts such as layer thickness, build orientation, raster angle, raster width, air gap, infill density and pattern, fibre volume fraction, fibre layer location, fibre orientation and feed rate. This study aims to assess the effects of nozzle diameter on the mechanical performance and the geometric properties of 3D printed short carbon fibre-reinforced composites processed by the FFF technique.
Design methodology approach
Tensile and three-point bending tests were performed to characterise the mechanical response of the 3D printed composite samples. The dimensional accuracy, the flatness error and surface roughness of the printed specimens were also evaluated. Moreover, manufacturing costs, which are related to printing time, were evaluated. Finally, scanning electron microscopy images of the printed samples were analysed to estimate the porosity as a function of the nozzle diameter and to justify the effect of nozzle diameter on dimensional accuracy and surface roughness.
Findings
The effect of nozzle diameter on the mechanical and geometric quality of 3D printed composite samples was significant. In addition, large nozzle diameters tended to increase mechanical performance and enhance surface roughness, with a reduction in manufacturing costs. In contrast, 3D printed composite samples with small nozzle diameter exhibited higher geometric accuracy. However, the effect of nozzle diameter on the flatness error and surface roughness was of slight significance. Finally, some print guidelines are included.
Originality value
The effect of nozzle diameter, which is directly related to product quality and manufacturing costs, has not been extensively studied. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of short carbon fibre-reinforced nylon composite components on nozzle diameter.
Details
Keywords
Miguel Ángel Caminero, Ana Romero, Jesús Miguel Chacón, Pedro José Núñez, Eustaquio García-Plaza and Gloria Patricia Rodríguez
Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based…
Abstract
Purpose
Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based powder bed fusion processes. The mechanical behaviour of FFF-metal materials is highly dependent on the processing parameters, filament quality and adjusted post-processing steps. In addition, the microstructural material properties and geometric characteristics are inherent to the manufacturing process. The purpose of this study is to characterize the mechanical and geometric performance of three-dimensional (3-D) printed FFF 316 L metal components manufactured by a low-cost desktop 3-D printer. The debinding and sintering processes are carried out using the BASF catalytic debinding process in combination with the BASF 316LX Ultrafuse filament. Special attention is paid on the effects of build orientation and printing strategy of the FFF-based technology on the tensile and geometric performance of the 3-D printed 316 L metal specimens.
Design/methodology/approach
This study uses a toolset of experimental analysis techniques [metallography and scanning electron microcope (SEM)] to characterize the effect of microstructure and defects on the material properties under tensile testing. Shrinkage and the resulting porosity of the 3-D printed 316 L stainless steel sintered samples are also analysed. The deformation behaviour is investigated for three different build orientations. The tensile test curves are further correlated with the damage surface using SEM images and metallographic sections to present grain deformation during the loading progress. Mechanical properties are directly compared to other works in the field and similar additive manufacturing (AM) and Metal Injection Moulding (MIM) manufacturing alternatives from the literature.
Findings
It has been shown that the effect of build orientation was of particular significance on the mechanical and geometric performance of FFF-metal 3-D printed samples. In particular, Flat and On-edge samples showed an average increase in tensile performance of 21.7% for the tensile strength, 65.1% for the tensile stiffness and 118.3% for maximum elongation at fracture compared to the Upright samples. Furthermore, it has been able to manufacture near-dense 316 L austenitic stainless steel components using FFF. These properties are comparable to those obtained by other metal conventional processes such as MIM process.
Originality/value
316L austenitic stainless steel components using FFF technology with a porosity lower than 2% were successfully manufactured. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of FFF 316 L components on the build orientation and printing strategy.
Details
Keywords
David Eley Borges, Steven Ramage, David Green, Christina Justice, Catherine Nakalembe, Alyssa Whitcraft, Brian Barker, Inbal Becker-Reshef, Charles Balagizi, Stefano Salvi, Vincent Ambrosia, Jesus San-Miguel-Ayanz, Luigi Boschetti, Robert Field, Louis Giglio, Laila Kuhle, Fabian Low, Albert Kettner, Guy Schumann, G. Robert Brakenridge, Robert Adler, Haris Kontoes, Helene De Boissezon, Andrew Eddy, Dalia Kirschbaum, Robert Emberson, Savannah Cooley, Simone Lloyd, Cecille Blake and Kelsey Reichenbach
As stated in the United Nations Global Assessment Report 2022 Concept Note, decision-makers everywhere need data and statistics that are accurate, timely, sufficiently…
Abstract
Purpose
As stated in the United Nations Global Assessment Report 2022 Concept Note, decision-makers everywhere need data and statistics that are accurate, timely, sufficiently disaggregated, relevant, accessible and easy to use. The purpose of this paper is to demonstrate scalable and replicable methods to advance and integrate the use of earth observation (EO), specifically ongoing efforts within the Group on Earth Observations (GEO) Work Programme and the Committee on Earth Observation Satellites (CEOS) Work Plan, to support risk-informed decision-making, based on documented national and subnational needs and requirements.
Design/methodology/approach
Promotion of open data sharing and geospatial technology solutions at national and subnational scales encourages the accelerated implementation of successful EO applications. These solutions may also be linked to specific Sendai Framework for Disaster Risk Reduction (DRR) 2015–2030 Global Targets that provide trusted answers to risk-oriented decision frameworks, as well as critical synergies between the Sendai Framework and the 2030 Agenda for Sustainable Development. This paper provides examples of these efforts in the form of platforms and knowledge hubs that leverage latest developments in analysis ready data and support evidence-based DRR measures.
Findings
The climate crisis is forcing countries to face unprecedented frequency and severity of disasters. At the same time, there are growing demands to respond to policy at the national and international level. EOs offer insights and intelligence for evidence-based policy development and decision-making to support key aspects of the Sendai Framework. The GEO DRR Working Group and CEOS Working Group Disasters are ideally placed to help national government agencies, particularly national Sendai focal points to learn more about EOs and understand their role in supporting DRR.
Originality/value
The unique perspective of EOs provide unrealized value to decision-makers addressing DRR. This paper highlights tangible methods and practices that leverage free and open source EO insights that can benefit all DRR practitioners.
Details
Keywords
José Valverde-Roda, Miguel Jesús Medina Viruel, Lucía Castaño Prieto and Miguel Ángel Solano Sánchez
Gastronomy can be a key destination choice factor. As tourists, people will be able to learn more about the culture of the place through its culinary assets. This paper aims to…
Abstract
Purpose
Gastronomy can be a key destination choice factor. As tourists, people will be able to learn more about the culture of the place through its culinary assets. This paper aims to analyse the interest and the gastronomic motivations of tourists to the city of Granada (Spain), where two important UNESCO World Heritage Sites (WHS) are included.
Design/methodology/approach
To achieve the aim of this study, fieldwork was carried out on a representative sample of tourists in Granada (Spain). Specifically, a total of 1,612 valid surveys were filled out in culinary establishments and historical sites. In these surveys, the opinion of tourists regarding gastronomy and their motivations when travelling was assessed.
Findings
The results of this research allow to make a segmentation of tourists into three groups according to their position and their interest in gastronomy based on their destination choice, distinguishing among survivors, enjoyers and experiencers’ tourists. Additionally, it is confirmed that gastronomy is shaped as a motivation that influences the level of tourist satisfaction, performing as a differentiating element that can help increase the competitiveness of the destination.
Originality/value
This research contributes to the scarce academic literature on tourism experiences in a city with WHS recognitions. This study confirms the existence of a relationship between gastronomic motivations and the level of satisfaction achieved by tourists who visit the city of Granada, where no similar studies were found. In addition, this work confirms the connection between gastronomy and culture.
Details
Keywords
Jesús Miguel Rodríguez-Mantilla, Víctor León Carrascosa and Angélica Martínez-Zarzuelo
The objective of this study was to evaluate and compare how school heads and teachers perceived the impact of implementing ISO 9001 Standards on the dimensions management and…
Abstract
Purpose
The objective of this study was to evaluate and compare how school heads and teachers perceived the impact of implementing ISO 9001 Standards on the dimensions management and planning and support and recognition.
Design/methodology/approach
The study included 2,192 subjects (86.2% teachers and 13.8% heads) belonging to 85 schools in four Spanish autonomous communities (Castilla y León, Community of Madrid, Andalusia and Community of Valencia). We used an instrument made up of 25 items evaluating both dimensions (Cronbach's α = 0.961). We conducted descriptive and differential analyses (applying ANOVA and calculating the effect size) overall and for the assessments by heads and teachers.
Findings
Results show a higher impact in small private schools with state subsidies, with 9–11 years of ISO implementation and receiving internal aid or none at all. The impact was medium–high on the management and planning system and medium–low on support and recognition, with heads evaluating at a significantly higher level the impact of ISO 9001 standards on improvement of preparation of classroom timetables, meetings, analysis of staff expectations and recognition of staff achievements.
Originality/value
Implementation of quality management systems in education has increased significantly in the last decades, and it is thus necessary to find evidence on how the resulting improvements are generated in schools. This study provides conclusions to the scientific and professional community about how school heads and teachers perceived the impact of implementing ISO 9001 standards on the dimensions management and planning and support and recognition.
Details