Search results

This study explores the concept of hydraulic flushing gate with an automated control system as a flow control structure of the urban storm water system. The research team has implemented a flush gate with the automated control system to the flow of the water in a drainage channel. The flow control structure was used to determine the effectiveness of such design by applying the concept of virtually on a real-world drainage system at Jalan Astana, Kuching. Computer representations of the existing drainage system and flow control structure were built using EPA SWMM 5.0 model. The series of flow control structure was proven to hold the runoff from 10-year storm. The modelling result shows that there is 25.9% of flow reduction at outlet node. As a modification of the existing drainage system in the urban area involves high construction cost, by installing a flow control structure in the drainage system is an innovative way to control the flow of the water.

It is analyzed whether working from home improves or impairs the job satisfaction and the work–life balance and under which conditions.

Blocks of influences on job satisfaction and work–life balance – personal traits, job characteristics, skills and employment properties – are estimated separately and in combination. To select the variables, the least angle regression is applied. The entropy balancing approach is used to determine causal effects. The study investigates whether imbalances are determined by private or job influences, whether firm-specific regulations and the selected control group affect the results and whether it only takes place during leisure time.

No clear effects of remote work on job satisfaction are revealed, but the impact on work–life balance is generally negative. If the imbalance is conditioned by private interests, this is not corroborated in contrast to job conditioned features. Employees working from home are happier than those who want to work at home, job satisfaction is higher and work–life balance is not worse under a strict contractual agreement than under a nonbinding commitment.

A wide range of personality traits, skills, employment properties and job characteristics are incorporated as determinants. The problem of causality is investigated. It is analyzed whether the use of alternative control and treatment groups leads to different results. The empirical investigation is based on new German data with three waves.

The purpose of this paper is to consider PTH solder joint reliability, particularly on the PTH solder joints with partial hole‐fill and without pin protrusion. Also, the impact of voiding on the solder joint reliability is discussed.

Thermal cycling tests for samples of different hole‐fill percentages and voiding were conducted, and cross‐sections of the PTH solder joints were performed to evaluate the solder microstructure, intermetallic formation, via hole‐fill, and the condition of the PTH metallization and PCB dielectric prior to thermal cycling and at different times during thermal cycling.

Different failure mechanisms were observed for solder joints with and without pin protrusion. PTH components with pin protrusion had better through hole‐fill and less voids than PTH components without pin protrusion.

The paper discusses in detail the effect of hole‐fill percentage and voiding on PTH solder joint reliability.

The reason for featuring this article is to provide home economists, particularly those in schools, with insight and perhaps inspiration, relating to future liaison with the hotel and catering industry. They will be able to see the professional approaches to food and drink, be able to form links with suppliers of food and equipment and perhaps obtain addresses for the future.

Knowledge management (KM) is widely adopted by organisations to improve their performance and make informed decisions. Prior research has confirmed that Information Systems (IS) play a critical role in effective KM. The purpose of this study is to examine the existing literature on the role of cloud-based KM systems (C-KMS) in small- and medium-sized enterprise (SMEs) by understanding its impact on the five KM processes: knowledge acquisition, creation, storage, sharing and usage.

This study conducted a systematic literature review by examining 133 journal articles and 24 conference papers from 2010 to 2021 on the role of cloud computing in KM for SMEs.

This study revealed that there are numerous empirical analyses on KM processes and tools in SMEs; however, only few studies demonstrate how the whole gamut of KM processes can adopt cloud computing in SMEs. Therefore, SMEs are ineffective at KM with limited IS intervention. This paper offers a proposition on how C-KMS can impact all five KM process, thereby increasing its effectiveness of KM in SMEs. This study analysed the benefits of C-KMS that brings to SMEs in terms of availability, scalability, reliability, security and cost.

This systematic review is restricted to certain databases (ScienceDirect, Sage journals, Scopus and Emerald Insight) and specific IS conference proceedings to source articles. The selection of search criteria and time frame is based on this study’s assessment and choice. This study adds value to our understanding of the role of KM in SMEs, and it reinforces the role of cloud computing in effectively managing knowledge in SMEs. The proposal of C-KMS for the enhancement of KM has significant implications for SMEs to effectively use knowledge for their survival and superior performance.

This study suggests three practical implications. First, adopting and using C-KMS provide a strong foundation to manage knowledge for SMEs in a cost-effective way. Second, C-KMS improves the effectiveness of KM by increasing availability of knowledge artifacts, which in turn aids SMEs’ growth. Third, C-KMS is useful to codify SME’s knowledge, and accordingly supports employees to acquire and use knowledge based on their requirements.

This study discussed C-KMS with contemporary social issues, such as the COVID-19 pandemic challenges for SMEs and demonstrated how C-KMS can support SMEs to handle such crises by managing knowledge effectively.

This research highlights the importance of the implementation of a C-KMS for the enhancement of KM in SMEs. The review provides empirical evidence on the challenges faced by SMEs regarding KM, as they often only have enough resources to focus on a single KM process, predominantly knowledge sharing. Consequently, a holistic approach to KM cannot be realised by SMEs. In this context, the findings of this study offer theoretical and practical insights into the role of cloud computing by addressing the challenges of KM in SMEs.

To develop an understanding of communication among agribusiness journals and to examine patterns of citations that allow the measurement and description of the structure of communication flows among those journals in a network.

The data for this study were gathered from the Journal Citation Reports (JCR) published by Thomson Scientific (Philadelphia). The authors conducted a bibliometric analysis, based on an international trade analogy to explain the network of agribusiness journals and how these journals communicate with business and economics journals.

Business and economics journals and, particularly the traditionally major ones, surprisingly were scarcely every used. However, the British Food Journal stood out with 50 citations to marketing and strategic management journals.

There are predominantly four such limitations: only 33 journals were studied, only one 5-year time period was involved, that time period is a few years old and the journal characteristics were derived using data from the “Scopes” and “Information for Authors” text on the website of each journal.

Exchanges of agribusiness knowledge and information among diverse stakeholders (consumers, suppliers and public agencies) in a complex environment require a better understanding of the network of agribusiness journals and their relation to traditional business and economics journals.

Networks of journals facilitate cooperation and interactions to improve developments in the field.

Examining citations from and to the field of agribusiness is interesting and important because knowledge is transferred through networks comprise those who contribute to journals, read them and learn from them, i.e. by “talking” to each other as well as by practitioners who also read and learn from those journals.

SINCE the first successful flight tests were made with the Escher Wyss airscrew some years ago, this type has been distinguished in this sphere by several fundamental innovations . From the beginning a very high speed of adjustment of approximately 8 deg./sec. was attained in normal operation as an automatic, constant‐speed airscrew. This property and the wide range of speed control between 100 per cent and approximately 40 per cent of the rated r.p.m. made it possible completely to release the pilot from control of the airscrew. Thus the problem of the automatic airscrew was finally solved (Fig. 1). That this solution was satisfactory has been proved by many years' service under the most stringent conditions in the Swiss Air Force.

The purpose of this study is to track the series of setbacks by a few like-minded persons since the early 1990s to entrench building surveying as a profession in Malaysia.

Data were sourced from elite interviews with authoritative individuals who have been championing building surveying as a profession and supplemented by secondary sources.

Established professional bodies became hostile to what they perceived as attempts to encroach on their professional jurisdictions. There was even a move to subjugate building surveyors to the auxiliary role. The ultimate aim to obtain statutory “ring fence” around the proposed building surveying profession did not find favour with lawmakers.

The limitation of small sample size was compensated by referral to past publications.

Latecomers face an uphill challenge in negotiating for legitimacy from established professions and lawmakers alike in a situation when no new work demand avails. Building surveyors in Malaysia have to either wait for external changes which would allow their traditional role to be formally recognised or take up new specialisations.

Additional empirical findings were uncovered to complement past studies. The main contribution lies in demonstrating the explanatory powers of the sociological lens for future studies on professions in the construction industry.

A dense urban structure cuts down traffic emissions. It also promotes waste heat use and storage possibilities as a form of district heating. However, quality elements associated with detached houses, such as tranquillity and self-expression possibilities, may be lost. Better building quality and alternatives to private car use can enable these elements in smaller spaces, which is assessed here. The paper aims to discuss these issues.

A technology set for an imaginary high-quality (HQ) apartment house is discussed by assessing increased embedded energy of the building structure, due to the HQ measures. HQ solutions include visual barriers, increased sound insulation, roof terraces, large windows, apartment adaptability, bike sheds, electrical cargo bikes and advanced energy solutions.

The increased construction and heating energy use in HQ buildings can be offset if car use is reduced by 10-15 per cent. There is a greater possibility of achieving this reduction if HQ housing can make urban densification more readily acceptable by demonstrating, that good quality housing can exist both in smaller building lots as well as in smaller apartments.

The quality issue brings a novel perspective to estimating the environmental impacts of built environment solutions. The approach here is quite simple, but the issue can be discussed more. That is, how much total resource input can be decreased, if the target is not to produce square metres but rather the necessary elements to have a good quality of life.

The objective of this paper is to present an example on how futures studies methodologies, especially backcasting, can be used to assist public policy formulation. Backcasting is particularly interesting method in this context, since it allows the key characteristics concerning the state of the future to be fixed according to the goals policymakers have set to achieve.

The paper is a case study presenting the goals, progression and the results of the backcasting exercise of the Finnish Prime Minister's Office.

The backcasting methodology, as applied in the exercise presented in this paper, is a useful tool in public policy formulation. It is important to note, however, that in the way the exercise was carried out in this case, it is only possible to view future development through qualitative arguments. The key element for successful application of the method is the choice of expert group that produces the information.

Even though backcasting seems to be very well suited for discussing and designing alternative ways of achieving predetermined policy goals, experiences of using this methodology in the policy context are quite rare in the scientific literature. This paper addresses this deficiency and presents experiences of one such case. These experiences should be of interest to those involved in long‐range strategy planning.