Search results

The purpose of this paper is to evaluate and exploit the combination of additive manufacturing polymeric technology and structural adhesives. The main advantage is to expand the maximum dimension of the 3D printed parts, which is typically limited, by joining the parts with structural adhesive, without losing strength and stiffness and keeping the major asset of polymeric 3 D printing: freedom of shape of the system and low cost of parts.

The materials used in the paper are the following. The adhesive considered is a commercial inexpensive acrylic, quite similar to superglue, applicable with almost no surface preparation and fast curing, as time constraint is one of the key problems that affects industrial adhesive applications. The 3D printed parts were in acrylonitrile butadiene styrene (ABS), obtained with a Fortus 250mc FDM machine, from Stratasys. The work first compares flat overlap joint with joints designed to permit mechanical interlocking of the adherends and then to a monolithic component with the same geometry. Single lap, joggle lap and double lap joints are the configurations experimentally characterized following a design of experiment approach.

The results show a failure in the substrate, due to the low strength of the polymeric adherends for the first batch of typical bonded configurations, single lap, joggle lap and double lap. The central bonded area, with an increased global thickness, never does fail, and the adhesive is able to transfer the load both with and without mechanical interlocking. An additional set of scarf joints was also tested to promote adhesive failure as well as to retrieve the adhesive strength in this application. The results shows that bonding of polymeric AM parts is able to express its full potential compared with a monolithic solution even though the joint fails prematurely in the adherend due to the bending stresses and the notches present in the lap joints.

Because of the 3D printed polymeric material adopted, the results may be generalized only when the elastic properties of the adherends and of the adhesive are similar, so it is not possible to extend the findings of the work to metallic additive manufactured components.

The paper shows that the adhesives are feasible way to expand the potentiality of 3 D printed equipment to obtain larger parts with equivalent mechanical properties. The paper also shows that the scarf joint, which fails in the adhesive first, can be used to extract information about the adhesive strength, useful for the designers which have to combine adhesive and additive manufactured polymeric parts.

To the best of the researchers’ knowledge, there are scarce quantitative information in technical literature about the performance of additive manufactured parts in combination with structural adhesives and this work provides an insight on this interesting subject. This manuscript provides a feasible way of using rapid prototyping techniques in combination with adhesive bonding to fully exploit the additive manufacturing capability and to create large and cost-effective 3 D printed parts.

The study seeks to evaluate the extent and quality of environmental reporting following a longitudinal analysis and covering a wide spectrum of industries in a single frame. The study also attempts to identify the set of most favored environmental reporting items by firms and items which are least disclosed. Furthermore, the study attempts to test whether certain corporate attributes such as firm size, age of the firm, leverage ratio, profitability, presence of independent directors in the board and gender diversity have any influencing power over environmental disclosure practices. The whole study has been carried out from legitimacy theory setting.

The study follows longitudinal analysis to identify the extent and quality of environmental disclosures. A self-constructed checklist of 12 environmental reporting items has been developed analyzing the annual report and content analysis method is followed to measure the extent and quality of environmental disclosures and identify environmental reporting items which are mostly disclosed and which are least disclosed. The study further uses panel data regression analysis to investigate whether certain corporate attributes have any impact on environmental disclosures using multiple linear regression. Total of 345 annual reports of listed financial and nonfinancial institutions have been observed in this study ranging from 2015 to 2019.

The key finding suggests that strict enforcement of Green Banking Rules 2011 fosters country’s commercial banks to invest more to protect the environment and commercial banks encourage nonfinancial institutions for environmental performance and related disclosures through finance. Therefore, almost 50% of sample firms disclose their environmental performance through reporting in either narrative, quantitative or monetary format which was only 2.23% in the last decade. Findings also reveal that tree plantation is the most reported environment disclosure followed by investment in renewable energy and green infrastructural projects and the least reported items are fund allocation for climatic changes and carbon management policy. Further analysis shows that firm size and leverage ratio both have positive impact on environmental reporting.

An in-depth analysis may be conducted to identify why certain environmental items are least disclosed such as fund allotment for climatic changes, carbon management policy, etc. and how corporations may earn social appreciation and motivation by investing in those least preferred items in legitimacy theory setting. Future research may also take into consideration other corporate attributes which are not considered in the study.

The study conducted an in-depth analysis to understand the most favored form of environmental disclosures (narrative/quantitative/monetary) and their extent after incorporation of regulatory guidelines, which is the first of its kind in the research of environmental disclosures. The study indeed contributes to the documentation of environmental reporting in the context of a developing country where there is a lack of longitudinal analysis from the lens of legitimacy theory. Moreover, a wide spectrum of industries has been taken into consideration which facilitates the generalized findings on the environmental disclosure practices of corporations in Bangladesh.

本研究擬評估公司報告環境方面的程度和質量, 以及對就環境報告披露而言、最受青睞和最不受歡迎的項目加以處理。研究亦擬測試企業屬性對實踐環境信息披露的影響。

研究使用內容分析法、去測量環境信息披露的程度和質量。研究使用多元回歸分析、去探討企業屬性對環境信息披露的影響。研究涵蓋孟加拉國上市公司共345個年度報告, 涵蓋的年期為2015年至 2019年。

研究結果似乎顯示綠色金融規則 - 2011 、成功鼓勵機構為保護環境而投放更多資源; 機構最樂於匯報的項目為植樹, 而披露最少的則為氣候變化和碳管理政策。進一步的研究分析顯示, 公司的規模和杠杆比率均會對環境匯報帶來正面的影響。

本研究豐富了關於發展中國家環境匯報的官方文件記錄, 而在這類國家, 透過合法化理論而進行的縱貫性分析研究頗為缺乏。本研究以深度分析法、去瞭解環境信息披露方面最受青睞的信息披露方式 (故事形式的敘述/定量形式/金融形式), 也去瞭解納入強制的規管指引後環境信息披露的程度; 就此而言, 本研究為這類環境信息披露研究的首個研究。

The increasing responsibility of organisations towards society and the environment has inverted the relationship between accounting and accountability, leading to accountability-based accounting systems. This study aims to explore the debate on accountability for climate change within the integrating thinking (IT) perspective. Ascertaining the most significant trends in the debate around purposes and performance that characterise climate mitigation engagement and their connections, the study would explore if and to what extent organisations are tackling climate actions.

A narrative review of the extensive academic literature developed from the Kyoto Protocol to date was performed. After selecting a representative sample, papers were analysed with the support of a new analytical framework that involves three dimensions – answerability, enforcement and outcome – and governance schemes that emerge from the involvement of the private and public sector and civil society. With the support of NVivo software, themes arisen were analysed and coded. Key items were labelled, creating specific nodes and synthesised into the proposed framework.

A “silo approach” largely characterises the debate on accountability for climate change. The most significant reasons behind the shortcomings of extant climate actions may be retrieved firstly in the weakness of the motivations that guide organisations to operate in a climate-friendly way.

This study underlines the need for a 360° integrated approach for strategically tackling climate actions.

This study would represent a further step towards an integrated approach for studying organisations behaviours in the “climate war”, embracing the connectivity between purposes and outcomes, capitals and the relationships amongst the various stakeholders.

The purpose of this paper is to investigate the status quo of Global Reporting Initiative (GRI)-based sustainable public value (SPV) reporting by electric utilities. Furthermore, the study attempts to find out whether a stock exchange listing and/or a public ownership are positively associated with electric utilities’ reporting regarding their contributions to a sustainable development (SD) or not.

An empirical analysis of sustainability reports published by electric utilities from 28 different countries all over the world is carried out. The investigation is based on a documentary analysis of 83 GRI G4 reports.

The findings show that electric utilities’ coverage of GRI indicators of the electric utilities sector disclosures varies between, as well as within, the different categories of the GRI guidelines and that the coverage of sector-specific indicators is often lacking behind the general coverage rates. Furthermore, the study reveals that a stock exchange listing is positively associated with electric utilities’ GRI-based SPV reporting. In contrast, public ownership does not show a significant association.

Electric utilities have a significant influence on SD. They operate in a regulated environment that is targeted at utilizing electric utilities for economic and environmental public policy objectives. Against that background, the study discusses which issues of SPV creation are reported by electric utilities that use the GRI guidelines and therefore brings together the public value (PV) and the sustainability community.

This paper aims to investigate whether managers use impression management through the presentation of non-financial information in an integrated reporting setting.

The authors performed an experiment with experienced professional controllers and part-time students enrolled in the executive master’s degree in finance and control at universities in the Netherlands. In this experiment, we manipulated the financial performance to test if managers present non-financial information differently based on the firm’s financial performance.

This study found that impression management is not applied by including or excluding non-financial key performance indicators (KPIs) in the integrated report, but by using more prominent presentation forms for positive non-financial performance and non-prominent ones for negative non-financial performance. However, the use of impression management through the presentation form decreased when the firms’ financial performance was positive. In that instance, this study noted that managers statistically significantly more often decided to present poor non-financial performance in a prominent presentation format in comparison to managers who were not aware of the financial performance.

A limitation of this paper is that the authors focused on only two impression management strategies: opportunistic/under-reporting and the presentation form. This analysis shows that the use of impression management mainly seems to occur through the presentation format. Future research could investigate other impression management strategies in an integrated reporting setting.

The results of this study are of importance for users of integrated reports, because it will provide more insight into whether firms are truly transparent in their integrated reports. Furthermore, the theoretical implication of this study is relevant to regulatory authorities, because it sheds light on the different forms of impression management used in integrated reporting and the influence of positively or negatively performing KPIs on the decisions of preparers of integrated reports.

Therefore, in this study, the authors add to prior literature by investigating the concept of impression management in an integrated reporting setting. More specifically, the authors perform an experiment and focus on different forms of impression management (the presentation format and under-reporting) through non-financial KPIs in an integrated reporting setting and link it to firm financial performance.

This study aims to shed light on how internships' features drive employability outcomes and answers the question of how internships that maximize the employability of interns can be designed. The study assumes that the duration of an internship, degree of formalization and the use of internship-specific motivational practices by companies are likely to influence interns' perceptions of employability.

A study among interns investigated the relationship between different internship features and interns' employability. Data on the duration of the internship, motivational practices specific to internships and the formalization of the internship process were collected from a large sample of 13,565 interns in 27 European countries from 15 to 35 years old.

The findings suggest that internship duration has a curvilinear effect on employability with increasing effects on employability at the beginning of the internship, followed by a decrease over time. In addition, the use of practices specifically designed to motivate interns also favors the interns' employability. Finally, formalization of the internship placement moderates the effect of motivational practices on employability.

By identifying key features of the internship experience – duration, formalization and motivational practices – the authors contribute to the theory related to the development of career resources and employability in young adults and show that these features significantly shape young adults' employability perceptions.

This paper aims to verify whether the integration of sustainability in executive compensation positively affects firms’ non-financial performance and whether corporate governance characteristics enhance the relationship between sustainability compensation and firms’ non-financial performance and to expand the domain of the impact of sustainability on non-financial performance.

This analysis is based on a sample of companies listed on the Milan Italian Stock Exchange from the Financial Times Milan Stock Exchange Index over the 2016–2020 period. Regression analysis was used by using data retrieved from the Refinitiv Eikon database and the sample firms’ remuneration reports.

The findings of this paper show that embedding sustainability in executive compensation positively affects firms’ non-financial performance. The results of this paper also reveal that specific corporate governance features can improve the impact of sustainability on non-financial performance.

This analysis is limited to Italian firms included in the Financial Times Milan Stock Exchange Index; however, the findings are highly significant.

The findings provide regulators with useful insights for considering the integration of sustainability goals into executive remuneration. Another implication is that policymakers should require – at least – listed firms to fulfil specific corporate governance structural requirements. Finally, the findings can provide investors and financial analysts with a greater awareness of the role played by executive remuneration in the long-term value-creation process.

This paper contributes to addressing the relationship among sustainability, remuneration and non-financial disclosure, drawing on the stakeholder–agency theoretical framework and focusing on Italian firms. This issue has received limited attention with controversial results in the literature.

Evidence from previous literature indicates that adopting a new innovative technology has a positive impact on a company’s business performance. Much less work has been carried out into examining whether a technology adoption has impact on corporate reputation. This paper aims to examine the latter topic in a context where social media is the channel used to share news about the introduction of a new technology. The empirical setting of the study consists of five retail companies located in the USA that decided to include Bitcoin as a payment platform.

Twitter data were used to measure how sharing news about the adoption of new technology could affect the reputation of the companies selected, keeping a clear distinction between the volume of data relating to social media responses and the sentiment expressed in the tweets. A panel vector autoregression model was used to incorporate series of data relating to news items, volume and sentiment.

The results show that the news about the adoption of a new technology has a positive impact on both the volume of tech-related tweets and the sentiment expressed in the tweets themselves, although the patterns of these two effects are different. The resulting impact decreases after a few days, both in volume and in sentiment.

The analysis has limitations that future research could address by extending and diversifying the examined companies and the social media used as data sources. The research suggests that managers in medium-sized companies can leverage on the introduction of new technologies that have a direct impact on their customers and gain reputational benefits in terms of immediate visibility.

The research introduces an additional dimension of analysis to the current stream of corporate reputation. Although the literature has already covered the dynamics of response to events on Twitter, by focusing on the adoption of the new Bitcoin technology, the paper provides novel insights.