Search results

The purpose of this paper is to study the effects of ion‐slip current and Hall current on the formation of longitudinal vortices in natural convection flow over a heated horizontal plate.

The criterion on the position marking on the onset of longitudinal vortices is defined in the present paper. The results show that the onset position characterized by the Grashof number depends on the Prandtl number, the Reynolds number, the wave number, the Hall parameter, the ion‐slip parameter, and the Hartmann number.

The flow becomes more stable as the magnetic field increases. However, the destabilizing effect is found on the flow when the Hall and ion‐slip currents are presented.

The standard method of linear stability model is applied, with terms higher than first order in disturbance quantities being neglected.

The problem of MHD natural convection flow with Hall and ion‐slip currents has many important engineering applications, e.g. power generators, Hall accelerators and flows in channels and ducts.

This study is to check the validity of the assumptions that the conditions of Hall and ion‐slip currents can be ignored.

The purpose of this study is to analyze an unsteady MHD Darcy flow of nonNewtonian hybrid nanoliquid past an exponentially accelerated vertical plate under the influence of velocity slip, Hall and ion slip effects in a rotating frame of reference. The fluids in the flow domain are assumed to be viscously incompressible electrically conducting. Sodium alginate (SA) has been taken as a base Casson liquid. A strong uniform magnetic field is applied under the assumption of low magnetic Reynolds number. Effect of Hall and ion-slip currents on the flow field is examined. The ramped heating and time-varying concentration at the plate are taken into consideration. First-order homogeneous chemical reaction and heat absorption are also considered. Copper and alumina nanoparticles are dispersed in base fluid sodium alginate to be formed as hybrid nanoliquid.

The model problem is first formulated in terms of partial differential equations (PDEs) with physical conditions. Laplace transform method (LTM) is used on the nondimensional governing equations for their closed-form solution. Based on these results, expressions for nondimensional shear stresses, rate of heat and mass transfer are also determined. Graphical presentations are chalked out to inspect the impacts of physical parameters on the pertinent physical flow characteristics. Numerical values of the shear stresses, rate of heat and mass transfer at the plate are tabulated for various physical parameters.

Numerical exploration reveals that a significant increase in the secondary flow (i.e. crossflow) near the plate is guaranteed with an augmenting in Hall parameter or ion slip parameter. MHD and porosity have an opposite effect on velocity component profiles for both types of nanoliquids. Result addresses that both shear stresses are strongly enhanced by the Casson effect. Also, hybrid nanosuspension in Casson fluid (sodium alginate) exhibits a lower rate of heat transfer than usual nanoliquid.

This model may be pertinent in cooling processes of metallic infinite plate in bath and hybrid magnetohydrodynamic (MHD) generators, metallurgical process, manufacturing dynamics of nanopolymers, magnetic field control of material processing, synthesis of smart polymers, making of paper and polyethylene, casting of metals, etc.

The originality of this study is to obtain an analytical solution of the modeled problem by using the Laplace transform method (LTM). Such an exact solution of nonNewtonian fluid flow, heat and mass transfer is rare in the literature. It is also worth remarking that the influence of Hall and ion slip effects on the flow of nonNewtonian hybrid nanoliquid is still an open question.

This paper addresses the three-dimensional flow of viscous nanofluid bounded by two plates. The lower plate stretches while the upper plate remains stationary. The fluid is electrically conducting in the presence of an applied magnetic field. In addition, the Hall, ion slip and Joule heating effects are retained. Governing equations for the considered physical happening are modeled under the phenomenon of boundary layer analysis.

Both analytical and numerical solutions for the resulting nonlinear system are derived. Numerical solutions have been presented by using bvp4c and NDSolve techniques. The homotopy analysis method is utilized for the development of convergent analytical solutions. A comparative study for the presented solutions is made. An excellent agreement between analytical and numerical solutions is noticed.

The dimensionless velocities, temperature and concentration are examined physically by two-dimensional plots, stream plot and tabular values. It is observed that Hall and ion slip parameters reduce the velocity field and temperature profile increases for the mounting values of the Eckert number.

This manuscript contains the novel contents which comprise the Hall and ion slip effects for the transportation of heat and mass for the flow of viscous nanofluid.

The purpose of this paper is to deal with an unsteady natural convection flow of a rotating fluid past an exponential accelerated vertical plate. The effect of Hall current, ion-slip and magnetic field is considered. Two types of plate temperature, namely, uniform and ramped temperature are considered to model heat transfer analysis.

The Laplace transform technique is employed to find the closed form solutions for velocity, temperature and concentration.

The effects of flow governing parameters on the velocity profile, temperature profile, concentration profile, skin friction, Nusselt and Sherwood numbers are discussed and presented through graphs and tables. It is found that fluid velocity in the primary flow direction decreases with the increase in the magnetic parameter.

First time in the literature, the authors obtained closed form solution to natural convection flow of a rotating fluid past an exponential accelerated vertical plate.

The purpose of this paper is to present an analytical study on an unsteady magnetohydrodynamic (MHD) boundary layer flow of a rotating viscoelastic fluid over an infinite vertical porous plate embedded in a uniform porous medium with oscillating free-stream taking Hall and ion-slip currents into account. The unsteady MHD flow in the rotating fluid system is generated due to the buoyancy forces arising from temperature and concentration differences in the field of gravity and oscillatory movement of the free-stream.

The resulting partial differential equations governing the fluid motion are solved analytically using the regular perturbation method by assuming a very small viscoelastic parameter. In order to note the influences of various system parameters and to discuss the important flow features, the numerical results for fluid velocity, temperature and species concentration are computed and depicted graphically vs boundary layer parameter whereas skin friction, Nusselt number and Sherwood number at the plate are computed and presented in tabular form.

An interesting observation is recorded that there occurs a reversal flow in the secondary flow direction due to the movement of the free stream. It is also noted that a decrease in the suction parameter gives a rise in momentum, thermal and concentration boundary layer thicknesses.

Very little research work is reported in the literature on non-Newtonian fluid dynamics where unsteady flow in the system arises due to time-dependent movement of the plate. The motive of the present analytical study is to analyse the influences of Hall and ion-slip currents on unsteady MHD natural convection flow of a rotating viscoelastic fluid (non-Newtonian fluid) over an infinite vertical porous plate embedded in a uniform porous medium with oscillating free-stream.

The purpose of this paper is to theoretically study the problem of the peristaltic flow of Jeffrey fluid in a non-uniform rectangular duct under the effects of Hall and ion slip. An incompressible and magnetohydrodynamics fluid is also taken into account. The governing equations are modelled under the constraints of low Reynolds number and long wave length. Recent development in biomedical engineering has enabled the use of the periastic flow in modern drug delivery systems with great utility.

Numerical integration is used to analyse the novel features of volumetric flow rate, average volume flow rate, instantaneous flux and the pressure gradient. The impact of physical parameters is depicted with the help of graphs. The trapping phenomenon is presented through stream lines.

The results of Newtonian fluid model can be obtained by taking out the effects of Jeffrey parameter from this model. No-slip case is a special case of the present work. The results obtained for the flow of Jeffrey fluid reveal many interesting behaviours that warrant further study on the non-Newtonian fluid phenomena, especially the shear-thinning phenomena. Shear-thinning reduces the wall shear stress.

The results of this paper are new and original.

In the present investigation, hydromagnetic boundary layer flow of Walters’-B fluid over a vertical porous surface implanted in a porous material under the action of a strong external applied magnetic field and rotation is presented. In several industrial applications, the external applied magnetic field is strong enough to produce Hall and ion-slip currents. Thus, the influence of Hall and ion-slip currents is also considered in this analysis. The flow through configuration is generated because of time varying motion of the free-stream and buoyancy action.

Regular perturbation scheme is used to obtain the solution of the system of coupled partial differential equations representing the mathematical model of the problem. Numerical computation has been performed to notice the change in flow behavior and the numerical results for velocity field, temperature field, species concentration, skin friction, rate of heat and mass transfer are presented through graphs and tables.

An important fact noticed that the exponential time varying motion of the free-stream induces reverse flow in the direction perpendicular to the main flow. Rising values of the strength of the applied magnetic field give increment in the fluid velocity in the neighbourhood of the vertical surface, this may cause because of the exponential motion of the free-stream. The behaviour of the Darcian drag force is similar as magnetic field on fluid flow.

In literature, very less research works are available on Walters’-B fluid where unsteadiness in the system occurs because of time varying motion of the free-stream. In this paper, the authors have made an attempt to study the action of Hall and ion-slip currents, rotation and external applied magnetic field on hydromagnetic boundary layer flow of Walters’-B fluid over a vertical surface implanted in a porous material.

The purpose of this paper is to investigate the hydromagnetic steady flow and heat transfer characteristics of an incompressible viscous electrically conducting fluid past a rotating disk in a porous medium with ohmic heating, Hall current and viscous dissipation are also investigated.

Using appropriate similarity variables and boundary‐layer approximations, the fluid equations for continuity, momentum and energy balance governing the problem are formulated. These equations are solved numerically by using the most effective Newton‐Raphson shooting method along with fourth‐order Runge‐Kutta integration algorithm.

It was found that magnetic field retards the fluid motion due to the opposing Lorentz force generated by the magnetic field. Both the magnetic field and the Eckert number tend to enhance the heat transfer efficiency. The Hall parameter however reduces the heat transfer rate. In terms of the friction coefficient, the magnetic interaction parameter, the Hall parameter and the Eckert number all combine to increase the skin friction, while increasing the Darcy number (increasing permeability) reduces the skin friction so increasing the fluid velocity.

This paper provides a very useful source of information for researchers on the subject of hydromagnetic flow in porous media.

This type of problem has potential to serve as a prototype for practical swirl problems, for example, axisymmetric flow in combustors.

In various kinds of materials processes, heat and mass transfer control in nuclear phenomena, constructing buildings, turbines and electronic circuits, etc., there are numerous problems that cannot be enlightened by uniform wall temperature. To explore such physical phenomena researchers incorporate non-uniform or ramped temperature conditions at the boundary, the purpose of this paper is to achieve the closed-form solution of a time-dependent magnetohydrodynamic (MHD) boundary layer flow with heat and mass transfer of an electrically conducting non-Newtonian Casson fluid toward an infinite vertical plate subject to the ramped temperature and concentration (RTC). The consequences of chemical reaction in the mass equation and thermal radiation in the energy equation are encompassed in this analysis. The flow regime manifests with pertinent physical impacts of the magnetic field, thermal radiation, chemical reaction and heat generation/absorption. A first-order chemical reaction that is proportional to the concentration itself directly is assumed. The Rosseland approximation is adopted to describe the radiative heat flux in the energy equation.

The problem is formulated in terms of partial differential equations with the appropriate physical initial and boundary conditions. To make the governing equations dimensionless, some suitable non-dimensional variables are introduced. The resulting non-dimensional equations are solved analytically by applying the Laplace transform method. The mathematical expressions for skin friction, Nusselt number and Sherwood number are calculated and expressed in closed form. Impacts of various associated physical parameters on the pertinent flow quantities, namely, velocity, temperature and concentration profiles, skin friction, Nusselt number and Sherwood number, are demonstrated and analyzed via graphs and tables.

Graphical analysis reveals that the boundary layer flow and heat and mass transfer attributes are significantly varied for the embedded physical parameters in the case of constant temperature and concentration (CTC) as compared to RTC. It is worthy to note that the fluid velocity is high with CTC and lower for RTC. Also, the fluid velocity declines with the augmentation of the magnetic parameter. Moreover, growth in thermal radiation leads to a declination in the temperature profile.

The proposed model has relevance in numerous engineering and technical procedures including industries related to polymers, area of chemical productions, nuclear energy, electronics and aerodynamics. Encouraged by such applications, the present work is undertaken.

Literature review unveils that sundry studies have been carried out in the presence of uniform wall temperature. Few studies have been conducted by considering non-uniform or ramped wall temperature and concentration. The authors are focused on an analytical investigation of an unsteady MHD boundary layer flow with heat and mass transfer of non-Newtonian Casson fluid past a moving plate subject to the RTC at the plate. Based on the authors’ knowledge, the present study has, so far, not appeared in scientific communications. Obtained analytical solutions are verified by considering particular cases of the published works.

The purpose of this paper is to provide an insight into the influence of gyrotactic microorganisms and Hall effect on the boundary layer flow of 29 nm CuO-water mixture on the upper pointed surface of a rocket, over the bonnet of a car and upper pointed surface of an aircraft. This is true since all these objects are examples of an object with variable thickness.

The simplification of Rosseland approximation (Taylor series expansion of T⁴ about T_∞) is avoided; thus, two different parameters relating to the study of nonlinear thermal radiation are obtained. The governing equation is non-dimensionalized, parameterized and solved numerically.

Maximum vertical and horizontal velocities of the 29 nm CuO-water nanofluid flow is guaranteed at a small value of Peclet number and large value of buoyancy parameter depending on the temperature difference. When the magnitude of thickness parameter χ is small, cross-flow velocity decreases with the velocity index and the opposite effect is observed when the magnitude of χ is large.

Directly or indirectly, the importance of the fluid flow which contains 29 nm CuO nanoparticle, water, and gyrotactic microorganisms in the presence of Hall current has been pointed out as an open question in the literature due to its relevance in imaging, ophthalmological and translational medicine informatics.