Search results

The purpose of this paper is to propose an interpolation-based projection framework for model reduction of quadratic-bilinear systems. The approach constructs projection matrices from the bilinear part of the original quadratic-bilinear descriptor system and uses these matrices to project the original system.

The projection matrices are constructed by viewing the bilinear system as a linear parametric system, where the input associated with the bilinear part is treated as a parameter. The advantage of this approach is that the projection matrices can be constructed reliably by using an a posteriori error bound for linear parametric systems. The use of the error bound allows us to select a good choice of interpolation points and parameter samples for the construction of the projection matrices by using a greedy-type framework.

The results are compared with the standard quadratic-bilinear projection methods and it is observed that the approximations through the proposed method are comparable to the standard method but at a lower computational cost (offline time).

In addition to the proposed model order reduction framework, the authors extend the one-sided moment matching parametric model order reduction (PMOR) method to a two-sided method that doubles the number of moments matched in the PMOR method.

The purpose of this paper is to demonstrate the applicability of the Discrete Empirical Interpolation method (DEIM) for simulating the swing dynamics of benchmark power system problems. The authors demonstrate that considerable savings in computational time and resources are obtained using this methodology. Another purpose is to apply a recently developed modified DEIM strategy with a reduced on-line computational burden on this problem.

On-line computational cost of the power system dynamics problem is reduced by using DEIM, which reduces the complexity of the evaluation of the nonlinear function in the reduced model to a cost proportional to the number of reduced modes. The on-line computational cost is reduced by using an approximate snap-shot ensemble to construct the reduced basis.

Considerable savings in computational resources and time are obtained when DEIM is used for simulating swing dynamics. The on-line cost implications of DEIM are also reduced considerably by using approximate snapshots to construct the reduced basis.

Applicability of DEIM (with and without approximate ensemble) to a large-scale power system dynamics problem is demonstrated for the first time.

The paper is concerned with interpolatory proper orthogonal decomposition (IPOD) methods for nonlinear transmission line circuits. This paper aims to examine several factors that must be considered when applying such model reduction techniques to this kind of circuit.

Two types of POD will be implemented. In each case, the choice of the order of the reduced model and the order of the interpolation space shall be considered. The stability of the models shall be explored.

The results indicate that the order for the reduced model to obtain accurate results depends on the chosen method when considering nonlinear transmission lines. The results also indicate that the structure of the nonlinear transmission line is crucial for determining the stability of the reduced models.

The work compares two IPOD methods and discusses the issues involved in achieving an accurate and stable reduced-order model for a nonlinear transmission line.

The purpose of this paper is to further simplify the use of NURBS in industrial environnements. Although isogeometric analysis (IGA) has been the object of intensive studies over the past decade, its massive deployment in industrial analysis still appears quite marginal. This is partly due to its implementation, which is not straightforward with respect to the elementary structure of finite element (FE) codes. This often discourages industrial engineers from adopting isogeometric capabilities in their well-established simulation environment.

Based on the concept of Bézier and Lagrange extractions, a novel method is proposed to implement IGA from an existing industrial FE code with the aim of bringing human implementation effort to the minimal possible level (only using standard input-output of finite element analysis (FEA) codes, avoid code-dependent subroutines implementation). An approximate global link to go from Lagrange polynomials to non-uniform-rational-B-splines functions is formulated, which enables the whole FE routines to be untouched during the implementation.

As a result, only the linear system resolution step is bypassed: the resolution is performed in an external script after projecting the FE system onto the reduced, more regular and isogeometric basis. The novel procedure is successfully validated through different numerical experiments involving linear and nonlinear isogeometric analyses using the standard input/output of the industrial FE software Code_Aster.

A non-invasive implementation of IGA into FEA software is proposed. The whole FE routines are untouched during the novel implementation procedure; a focus is made on the IGA solution of nonlinear problems from existing FEA software; technical details on the approach are provided by means of illustrative examples and step-by-step implementation; the methodology is evaluated on a range of two- and three-dimensional elasticity and elastoplasticity benchmarks solved using the commercial software Code_Aster.

Under this heading are published regularly abstracts of all Reports and Memoranda of the Aeronautical Research Committee, Reports and Technical Notes of the U.S. National Advisory Committee for Aeronautics and publications of other similar research bodies as issued

This paper aims to describe a method for efficient frequency domain model order reduction. The method attempts to combine the desirable attributes of Krylov reduction and proper orthogonal decomposition (POD) and is entitled Krylov enhanced POD (KPOD).

The KPOD method couples Krylov’s moment-matching property with POD’s data generalization ability to construct reduced models capable of maintaining accuracy over wide frequency ranges. The method is based on generating a sequence of state- and frequency-dependent Krylov subspaces and then applying POD to extract a single basis that generalizes the sequence of Krylov bases.

The frequency response of a pre-stressed microelectromechanical system resonator is used as an example to demonstrate KPOD’s ability in frequency domain model reduction, with KPOD exhibiting a 44 per cent efficiency improvement over POD.

The results indicate that KPOD greatly outperforms POD in accuracy and efficiency, making the proposed method a potential asset in the design of frequency-selective applications.

Gives a bibliographical review of the finite element meshing and remeshing from the theoretical as well as practical points of view. Topics such as adaptive techniques for meshing and remeshing, parallel processing in the finite element modelling, etc. are also included. The bibliography at the end of this paper contains 1,727 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1990 and 2001.

From a theoretical point of view the question of spurious modes has been regarded as a closed problem. However, in this paper we show that even a precise definition of spurious‐free approximation was lacking. Hence, a sound definition of spurious‐free finite element method is given and a set of necessary and sufficient conditions ensuring that a finite element method is spurious‐free in the defined sense is stated. A critical comparison between the proposed theory and the currently accepted one is then carried out and existing counterexamples to the latter are pointed out. Comparison with an older theory leads to another set of necessary and sufficient conditions providing a better grasp of the key feature a finite element space must have to rule out spurious modes. The impact of the proposed theory is stressed, showing that Nedelec's tetrahedral edge elements of all orders provide spurious‐free approximations in all conditions of practical interest. Finally, it is shown, for the first time to the best of authors’ knowledge, that also many high‐order edge elements, recently proposed in the engineering literature for the analysis of electromagnetic problems, provide the same kind of reliable approximation.