Search results
1 – 10 of 478Gopal Shruthi and Murugan Suvinthra
The purpose of this paper is to study large deviations for the solution processes of a stochastic equation incorporated with the effects of nonlocal condition.
Abstract
Purpose
The purpose of this paper is to study large deviations for the solution processes of a stochastic equation incorporated with the effects of nonlocal condition.
Design/methodology/approach
A weak convergence approach is adopted to establish the Laplace principle, which is same as the large deviation principle in a Polish space. The sufficient condition for any family of solutions to satisfy the Laplace principle formulated by Budhiraja and Dupuis is used in this work.
Findings
Freidlin–Wentzell type large deviation principle holds good for the solution processes of the stochastic functional integral equation with nonlocal condition.
Originality/value
The asymptotic exponential decay rate of the solution processes of the considered equation towards its deterministic counterpart can be estimated using the established results.
Details
Keywords
Samira Ramdane and Assia Guezane-Lakoud
The paper deals with the existence of positive solutions for a coupled system of nonlinear fractional differential equations with p-Laplacian operator and involving both right…
Abstract
Purpose
The paper deals with the existence of positive solutions for a coupled system of nonlinear fractional differential equations with p-Laplacian operator and involving both right Riemann–Liouville and left Caputo-type fractional derivatives. The existence results are obtained by the help of Guo–Krasnosel'skii fixed-point theorem on a cone in the sublinear case. In addition, an example is included to illustrate the main results.
Design/methodology/approach
Fixed-point theorems.
Findings
No finding.
Originality/value
The obtained results are original.
Details
Keywords
In this paper, the Cauchy-type problem for the Laplace equation was solved in the rectangular domain with the use of the Chebyshev polynomials. The purpose of this paper is to…
Abstract
Purpose
In this paper, the Cauchy-type problem for the Laplace equation was solved in the rectangular domain with the use of the Chebyshev polynomials. The purpose of this paper is to present an optimal choice of the regularization parameter for the inverse problem, which allows determining the stable distribution of temperature on one of the boundaries of the rectangle domain with the required accuracy.
Design/methodology/approach
The Cauchy-type problem is ill-posed numerically, therefore, it has been regularized with the use of the modified Tikhonov and Tikhonov–Philips regularization. The influence of the regularization parameter choice on the solution was investigated. To choose the regularization parameter, the Morozov principle, the minimum of energy integral criterion and the L-curve method were applied.
Findings
Numerical examples for the function with singularities outside the domain were solved in this paper. The values of results change significantly within the calculation domain. Next, results of the sought temperature distributions, obtained with the use of different methods of choosing the regularization parameter, were compared. Methods of choosing the regularization parameter were evaluated by the norm Nmax.
Practical implications
Calculation model described in this paper can be applied to determine temperature distribution on the boundary of the heated wall of, for instance, a boiler or a body of the turbine, that is, everywhere the temperature measurement is impossible to be performed on a part of the boundary.
Originality/value
The paper presents a new method for solving the inverse Cauchy problem with the use of the Chebyshev polynomials. The choice of the regularization parameter was analyzed to obtain a solution with the lowest possible sensitivity to input data disturbances.
Details
Keywords
Godwin Amechi Okeke and Daniel Francis
The authors prove the existence and uniqueness of fixed point of mappings satisfying Geraghty-type contractions in the setting of preordered modular G-metric spaces. The authors…
Abstract
Purpose
The authors prove the existence and uniqueness of fixed point of mappings satisfying Geraghty-type contractions in the setting of preordered modular G-metric spaces. The authors apply the results in solving nonlinear Volterra-Fredholm-type integral equations. The results extend generalize compliment and include several known results as special cases.
Design/methodology/approach
The results of this paper are theoretical and analytical in nature.
Findings
The authors prove the existence and uniqueness of fixed point of mappings satisfying Geraghty-type contractions in the setting of preordered modular G-metric spaces. apply the results in solving nonlinear Volterra-Fredholm-type integral equations. The results extend, generalize, compliment and include several known results as special cases.
Research limitations/implications
The results are theoretical and analytical.
Practical implications
The results were applied to solving nonlinear integral equations.
Social implications
The results has several social applications.
Originality/value
The results of this paper are new.
Details
Keywords
Svetlin Georgiev, Aissa Boukarou, Keltoum Bouhali and Khaled Zennir
This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global…
Abstract
Purpose
This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.
Design/methodology/approach
This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.
Findings
This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.
Originality/value
This article is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.
Details
Keywords
This study describes the applicability of the a priori estimate method on a nonlocal nonlinear fractional differential equation for which the weak solution's existence and…
Abstract
Purpose
This study describes the applicability of the a priori estimate method on a nonlocal nonlinear fractional differential equation for which the weak solution's existence and uniqueness are proved. The authors divide the proof into two sections for the linear associated problem; the authors derive the a priori bound and demonstrate the operator range density that is generated. The authors solve the nonlinear problem by introducing an iterative process depending on the preceding results.
Design/methodology/approach
The functional analysis method is the a priori estimate method or energy inequality method.
Findings
The results show the efficiency of a priori estimate method in the case of time-fractional order differential equations with nonlocal conditions. Our results also illustrate the existence and uniqueness of the continuous dependence of solutions on fractional order differential equations with nonlocal conditions.
Research limitations/implications
The authors’ work can be considered a contribution to the development of the functional analysis method that is used to prove well-positioned problems with fractional order.
Originality/value
The authors confirm that this work is original and has not been published elsewhere, nor is it currently under consideration for publication elsewhere.
Details
Keywords
Michał Ciałkowski, Aleksander Olejnik, Magda Joachimiak, Krzysztof Grysa and Andrzej Frąckowiak
To reduce the heat load of a gas turbine blade, its surface is covered with an outer layer of ceramics with high thermal resistance. The purpose of this paper is the selection of…
Abstract
Purpose
To reduce the heat load of a gas turbine blade, its surface is covered with an outer layer of ceramics with high thermal resistance. The purpose of this paper is the selection of ceramics with such a low heat conduction coefficient and thickness, so that the permissible metal temperature is not exceeded on the metal-ceramics interface due to the loss ofmechanical properties.
Design/methodology/approach
Therefore, for given temperature changes over time on the metal-ceramics interface, temperature changes over time on the inner side of the blade and the assumed initial temperature, the temperature change over time on the outer surface of the ceramics should be determined. The problem presented in this way is a Cauchy type problem. When analyzing the problem, it is taken into account that thermophysical properties of metal and ceramics may depend on temperature. Due to the thin layer of ceramics in relation to the wall thickness, the problem is considered in the area in the flat layer. Thus, a one-dimensional non-stationary heat flow is considered.
Findings
The range of stability of the Cauchy problem as a function of time step, thickness of ceramics and thermophysical properties of metal and ceramics are examined. The numerical computations also involved the influence of disturbances in the temperature on metal-ceramics interface on the solution to the inverse problem.
Practical implications
The computational model can be used to analyze the heat flow in gas turbine blades with thermal barrier.
Originality/value
A number of inverse problems of the type considered in the paper are presented in the literature. Inverse problems, especially those Cauchy-type, are ill-conditioned numerically, which means that a small change in the inputs may result in significant errors of the solution. In such a case, regularization of the inverse problem is needed. However, the Cauchy problem presented in the paper does not require regularization.
Details
Keywords
This paper shows a new methodology for evaluating the value and sensitivity of autocall knock-in type equity-linked securities. While the existing evaluation methods, Monte Carlo…
Abstract
This paper shows a new methodology for evaluating the value and sensitivity of autocall knock-in type equity-linked securities. While the existing evaluation methods, Monte Carlo simulation and finite difference method, have limitations in underestimating the knock-in effect, which is one of the important characteristics of this type, this paper presents a precise joint probability formula for multiple autocall chances and knock-in events. Based on this, the calculation results obtained by utilizing numerical and Monte Carlo integration are presented and compared with those of existing models. The results of the proposed model show notable improvements in terms of accuracy and calculation time.
Details
Keywords
The purpose of this paper is to introduce a numerical investigation used to calculate the J-integral of the main crack behavior emanating from a semicircular notch and double…
Abstract
Purpose
The purpose of this paper is to introduce a numerical investigation used to calculate the J-integral of the main crack behavior emanating from a semicircular notch and double semicircular notch and its interaction with another crack which may occur in various positions in (TiB/Ti) functionally graded material (FGM) plate subjected to tensile mechanical load.
Design/methodology/approach
For this purpose the variations of the material properties are applied at the integration points and at the nodes by implementing a subroutine USDFLD in the ABAQUS software. The variation of the J-integral according to the position, the length and the angle of rotation of cracks is demonstrated. The variation of the J-integral according to the position, the length and the angle of rotation of cracks is examined; also the effect of different parameters for double notch FGM plate is investigated as well as the effect of band of FGM within the ceramic plate to reduce J-integral.
Findings
According to the numerical analysis, all parameters above played an important role in determining the J-integral.
Originality/value
The present study consists in investigating the simulation used to calculate the J-integral of the main crack behavior emanating from a semicircular notch and double semicircular notch and its interaction with another crack which may occur in various positions in (TiB/Ti) FGM plate under Mode I. The J-integral is determined for various load applied. The cracked plate is joined by bonding an FGM layer to TiB plate on its double side. The determination of the gain on J-integral by using FGM layer is highlighted. The calculation of J-integral of FGM’s involves the direction of the radius of the notch in order to reduce the J-integral.
Details
Keywords
M. Iadh Ayari and Sabri T.M. Thabet
This paper aims to study qualitative properties and approximate solutions of a thermostat dynamics system with three-point boundary value conditions involving a nonsingular kernel…
Abstract
Purpose
This paper aims to study qualitative properties and approximate solutions of a thermostat dynamics system with three-point boundary value conditions involving a nonsingular kernel operator which is called Atangana-Baleanu-Caputo (ABC) derivative for the first time. The results of the existence and uniqueness of the solution for such a system are investigated with minimum hypotheses by employing Banach and Schauder's fixed point theorems. Furthermore, Ulam-Hyers
Design/methodology/approach
This paper considered theoretical and numerical methodologies.
Findings
This paper contains the following findings: (1) Thermostat fractional dynamics system is studied under ABC operator. (2) Qualitative properties such as existence, uniqueness and Ulam–Hyers–Rassias stability are established by fixed point theorems and nonlinear analysis topics. (3) Approximate solution of the problem is investigated by Adomain decomposition method. (4) Convergence analysis of ADM is proved. (5) Examples are provided to illustrate theoretical and numerical results. (6) Numerical results are compared with exact solution in tables and figures.
Originality/value
The novelty and contributions of this paper is to use a nonsingular kernel operator for the first time in order to study the qualitative properties and approximate solution of a thermostat dynamics system.
Details