Search results

The purpose of this study is to fill the gap and apply a fault tree analysis (FTA) in detention lists of Black Sea Region published port state reports from 2005 to 2016. The study analyzes valid records of 2,653 detained ships with 6,374 deficiencies based on a strategic management approach. This paper sets up FTA technique to assess the detention probability of a random ship which calls the Black Sea Region with the help of detention lists published within subject years.

This paper is not published elsewhere, and it is based on an original work, which figures out detention probability of a regular ship at Black Sea Region port state control from published lists of Black Sea Memorandum of Understanding (MoU). By utilizing these detention lists, a generic fault tree diagram is drawn. Those probabilities could be used strategically with the most seen deficiencies in the region which all could guide the users, rule makers and the controllers of the maritime system.

FTA has conducted based on the data which was collected from website of BS MoU detention lists that published from 2005 to 2016. Those lists have been published on monthly basis from 2011 to 2016 and on quarterly basis from 2005 to 2010. Proper detention records have been included into the research, whereas some missing records were excluded. Subject lists have been harmonized and rearranged according to Black Sea MoU Detention Codes which was published on October 2017 at Black Sea MoU’s website. According to BS MoU Annual Reports, 58,620 ships were inspected from 2005 to 2016 as seen in Table 1. Those ships were inspected by each member country’s PSOs in the light and guidance of predefined selection criteria of the region. Detention frequency of inspected ships detected as 0.103116 which explains any ship that called any port in the Black Sea Region could be 10% detained after inspected by PSO. Also, each intermediate event-calculated frequency enlightens the probabilities of nonconformities of ships. Although those deficiencies show structural safety and security nonconformities, those probabilities also prove us that management side of the ships are not enough to manage and apply a safety culture. By the light of that, ship owners/managers could see the general nonconformities according to regional records and could manage their fleet and each ship as per those necessities.

In the light of the above analysis, the future research on this subject could be studied on other regions which might enable a benchmark opportunity to users. Also, insurance underwriters have their own reports and publications that could clarify different points of view for merchant mariners and regulators. In this research, FTA is used as a main method to figure out the root causes of the detentions. For future researches, different qualitative and quantitative methods could be used under the direction of subjects.

Detention frequency of inspected ships detected as 0.103116 which explains any ship that called any port in the Black Sea Region could be 10% detained after inspected by PSO. Also, each intermediate event-calculated frequency enlightens the probabilities of nonconformities of ships. Although those deficiencies show structural safety and security nonconformities, those probabilities also prove us that management side of the ships are not enough to manage and apply safety culture. By the light of that, ship owners/managers could see the general nonconformities according to regional records and could manage their fleet and each ship as per those necessities.

With the nature of carriage, shipping business carry out its essential economic attendance in world trade system via inclusion in national and international transportation. As a catalyst in international trade, shipping itself enables time, place and economic benefits to users (Bosneagu, Coca and Sorescu, 2015). Social and institutional pressures generate shipping industry as one of the most regulated global industries which creates high complexity. Industry evolved to multi-directional structure ranges from international conventions (IMO and ILO) to “supra-national interferences” (EU directives), to regional guidance (MoUs) to national laws (flag states). Ship operators endeavor to adopt/fit its industry environment where rules are obvious. With adaptation of industrial environment, ship operators are able to create an important core competency.

This study enlightens the most recorded deficiencies and analyzed them with the help of fault three method. These calculated frequencies/probabilities show the most seen nonconformities and the root causes of detentions in the Black Sea Region in which those results will be benefited strategically that enables a holistic point of view that guide the owners/managers, charterers/sellers/shippers, classification societies, marine insurance underwriters, ship investors, third parties, rule makers and the controllers of the system to apply safety culture.

The electromechanical brake system is leading the latest development trend in railway braking technology. The tolerance stack-up generated during the assembly and production process catalyzes the slight geometric dimensioning and tolerancing between the motor stator and rotor inside the electromechanical cylinder. The tolerance leads to imprecise brake control, so it is necessary to diagnose the fault of the motor in the fully assembled electromechanical brake system. This paper aims to present improved variational mode decomposition (VMD) algorithm, which endeavors to elucidate and push the boundaries of mechanical synchronicity problems within the realm of the electromechanical brake system.

The VMD algorithm plays a pivotal role in the preliminary phase, employing mode decomposition techniques to decompose the motor speed signals. Afterward, the error energy algorithm precision is utilized to extract abnormal features, leveraging the practical intrinsic mode functions, eliminating extraneous noise and enhancing the signal’s fidelity. This refined signal then becomes the basis for fault analysis. In the analytical step, the cepstrum is employed to calculate the formant and envelope of the reconstructed signal. By scrutinizing the formant and envelope, the fault point within the electromechanical brake system is precisely identified, contributing to a sophisticated and accurate fault diagnosis.

This paper innovatively uses the VMD algorithm for the modal decomposition of electromechanical brake (EMB) motor speed signals and combines it with the error energy algorithm to achieve abnormal feature extraction. The signal is reconstructed according to the effective intrinsic mode functions (IMFS) component of removing noise, and the formant and envelope are calculated by cepstrum to locate the fault point. Experiments show that the empirical mode decomposition (EMD) algorithm can effectively decompose the original speed signal. After feature extraction, signal enhancement and fault identification, the motor mechanical fault point can be accurately located. This fault diagnosis method is an effective fault diagnosis algorithm suitable for EMB systems.

By using this improved VMD algorithm, the electromechanical brake system can precisely identify the rotational anomaly of the motor. This method can offer an online diagnosis analysis function during operation and contribute to an automated factory inspection strategy while parts are assembled. Compared with the conventional motor diagnosis method, this improved VMD algorithm can eliminate the need for additional acceleration sensors and save hardware costs. Moreover, the accumulation of online detection functions helps improve the reliability of train electromechanical braking systems.

The purpose of this paper is to investigate and quantify the impact of product complexity, including architectural complexity, on operator learning, productivity and quality performance in both assembly and disassembly operations. This topic has not been extensively investigated in previous research.

An extensive experimental campaign involving 84 operators was conducted to repeatedly assemble and disassemble six different products of varying complexity to construct productivity and quality learning curves. Data from the experiment were analysed using statistical methods.

The human learning factor of productivity increases superlinearly with the increasing architectural complexity of products, i.e. from centralised to distributed architectures, both in assembly and disassembly, regardless of the level of overall product complexity. On the other hand, the human learning factor of quality performance decreases superlinearly as the architectural complexity of products increases. The intrinsic characteristics of product architecture are the reasons for this difference in learning factor.

The results of the study suggest that considering product complexity, particularly architectural complexity, in the design and planning of manufacturing processes can optimise operator learning, productivity and quality performance, and inform decisions about improving manufacturing operations.

While previous research has focussed on the effects of complexity on process time and defect generation, this study is amongst the first to investigate and quantify the effects of product complexity, including architectural complexity, on operator learning using an extensive experimental campaign.

Recent changes in the UK to the regulation and modes of work in the formal and informal economies are considered. Research in this field has tended to remain in silos (treating formal economy working conditions separately from research on the informal economy). The question is whether the means of work and benefits to the worker for formal and informal work are now as different as the former images of formal and informal economy work imply under a “jobs-for-life” economy. The purpose of this paper is to consider whether the current aim of government regulation of the informal economy – to formalise it – is actually of benefit to workers, as might be supposed.

This paper considers recent research findings on the formal and informal economy, using official government statistics for the UK and more detailed European studies on the informal economy.

This paper argues that formal employment in the UK is becoming more casualised, with less associated benefits to employees. Though it is still of benefit to the state to formalise informal work (to increase tax take), some of the links between formalisation and a good working environment for workers are being broken, which may lead to the informal economy becoming more popular and requiring different priorities in its regulation.

This paper argues that we need to change our assumptions and image of work in the formal economy, compared to that in the informal economy.