Search results

This study aims to develop an assessment strategy for fire damaged infrastructures based on the implementation of quick diagnostic techniques and consistent interpretation procedures, so to determine the residual safety margin and any need for repair works.

In this perspective, several tailored non-destructive test (NDT) methods have been developed in the past two decades, providing immediate results, with no need for time-consuming laboratory analyses. Moreover, matching their indications with the calculated effects of a tentative fire scenario allows harmonizing distinct pieces of evidence in the coherent physical framework of fire dynamics and heat transfer.

This approach was followed in the investigations on a concrete overpass in Verona (Italy) after a coach violently impacted one supporting pillar and caught fire in 2017. Technical specifications of the vehicle made it possible to bound the acceptable ranges for fire load and maximum rate of heat release, while surveillance video footage indicated the duration of the burning stage. Some established NDT methods (evaluation of discolouration, de-hydroxylation and rebar hardness) were implemented, together with advanced ultrasonic tests based on pulse refraction and pulse-echo tomography.

The results clearly showed the extension of the most damaged area at the intrados of the box girders and validated the maximum heating depth, as predicted by numerical analysis of the heat transient ensuing from the localized fire model.

This paper highlights a crucial public safety issue due to falling objects from tall residential buildings in Singapore. A systematic façade inspection regime and a system of evaluation of severity for the detection and assessment of potential falling objects from tall buildings are presented.

The research uses qualitative case study approach with 450 tall residential buildings sampled for the study. The common materials, elements, components with high risk of falling objects, the nature and type of the falling, the critical factors affecting the falling, the respective level of severity, and the effectiveness of various diagnostic techniques and protocols, are summarised.

Façade for tall residential buildings in Singapore comprises mainly cementitious materials cast in situ or precast, with fixtures and architectural features, all of which have potential of falling. The common anomalies arising from each material and fixture/features are identified, the causes evaluated and their implications to future design, construction and maintenance analysed.

This study provides original and significant information to a crucial public safety issue, setting design and construction criteria that will serve as a benchmark for new and existing facades, applicable to all cities dominated by tall buildings. The paper presents original figures, checklists and guides as a basis for readers' consideration to use according to their respective unique conditions.

This study used the literature review and the modified Delphi method to evaluate the importance of the catering quality indices of university canteens in China. In order to compile the catering quality indices of university canteens in China as reference for the subsequent improvement of Chinese canteens.

This study first analysed literature data to establish the preliminary quality indices and used the modified Delphi method for measurement. After three rounds of Delphi analysis by 35 experts, the results of the catering quality indices of university canteens in China are summarised.

The research results show that university canteen catering quality issues are divided into six dimensions, including catering safety management, employee hygiene management, catering service, food quality, environmental atmosphere and corporate social responsibility. Catering safety management is the most important index, followed by employee hygiene management.

The research results can be used as suggestions for follow-up improvements in the quality of university canteens in China and a basis of reference for amendments to relevant national or local laws and regulations. The food prices, food quality and whether food hygiene and safety standards are met by university canteens are all related to the health and vital interests of the teachers and students, as well as the stability of the university. Therefore, the government should increase supervision in these aspects to avoid decline in the quality of meals due to low profits and enforce strict requirements for food safety.

The purpose of this paper is to examine the effect of adopting certified food production on chemical fertilizer and pesticide use in China.

The authors estimate fixed effect models to track the changes in agrochemical consumption at household level over time and evaluate the effect of certified food production, using an unbalanced panel data set covering 4,830 households in six provinces over the period 2005–2013.

On average, the authors do not find significant effects of certified food production on either chemical fertilizer or pesticide consumption among Chinese farmers. The effects are heterogeneous across villages, but the heterogeneous effects show no clear pattern that is consistent with different types of certification. The findings are robust to the use of alternative panel structure and certification indicators. The lack of knowledge about certification among farmers, the price premium and differences in regulation enforcement across regions may explain why the authors do not find negative effects on agrochemical use.

This study suggests that careful inspections and strong enforcement of certified food production is needed to ensure that the environmental goals of certified food production can be achieved and the reputation of certification in China can be improved. The inspection of certification producers and the enforcement of current regulations should be stricter for the further healthy development of certified food production in China.

This study is the first attempt to systematically evaluate the impact of food certification on the use of agrochemicals in Chinese agriculture.

The purpose of this paper is to investigate the challenges faced with mobile information communication technology (M-ICT), more specifically tablet software, in the construction phase of UK infrastructure projects. Quality assurance in the context of passive fire protection is scrutinised, where M-ICT use is prevalent, to provide an industry perspective.

The research design is founded on exploratory multiple case study approach. Specific themes are developed, based on a critical review of previous ICT studies. The themes identified are used to inform a qualitative interview protocol for investigating three large UK infrastructure projects. Each project is at different stages in the construction phase, with varying examples of M-ICT implementation in use. Participants are interviewed regarding their experiences of the implementation of M-ICT on each project.

Findings identify diverse experiences across each project. Single and multiple M-ICT platforms are currently being used, with individual stakeholders using ICT in isolation, and in some instances, multiple project stakeholders are using it together. Complete replacement of paper-based processes is evident in one case study, but more commonly, digital technology is being used in parallel to traditional paper-based processes. The challenges, although varied across each case study, can be categorised under the themes of Technology (IT support, ICT infrastructure, IT security, contractual, software), People (social aspects, user competency, safety), Technical Compliance (technical compliance evidence) and Process (conventional processes).

It is recommended that each theme be reviewed at project commencement, with all key stakeholders, to ensure key aspects are considered prior to M-ICT deployment. This will ensure avoidance of challenges reported and maximise the opportunities that are available through M-ICT in a multi-stakeholder infrastructure project.

The purpose of this paper is to reveal the main causes of delays in the projects are from the client (relative importance index (RII)=0.716), labor and equipment (RII=0.701) and contractor (RII=0.698). Hence determining the contractual responsibility of delay is the most likely source of dispute in construction projects and many techniques have been used in the courts to demonstrate the criticalities of a delay event on the project schedule. Therefore, authors try to investigate all process-based techniques of delay claims and evaluated and conformed them with principles by Society of Construction Law (SCL) protocol and Association for the Advancement of Cost Engineering International (AACEI) in order to choose the best techniques based on the specific circumstances of each project.

This section is divided into two distinct parts: refers to the methods used to assess the perceptions of clients, consultants, and contractors on the relative importance of causes of delay in construction industry; and refers to advantages and disadvantages of various techniques used to analyze delays and their conform with SCL protocol. A questionnaire was developed to assess the perceptions of clients, consultants, and contractors on the relative importance of causes of delay in Iranian construction industry. The respondents were asked to indicate their response category on 78 well-recognized construction delay factors identified by authors.

In total, 78 causes of delay were identified through research. The identified causes are combined into seven groups. The field survey included 58 contractors, 55 consultants, and 62 client. Data collected were analyzed by RII and Statistical Package for Social Sciences (SPSS). The authors identified main causes of delay and ten most important causes, according to Table AII, from the perspective of three major groups of participants (clients, consultants and contractors). The ranking of categories of causes of delay, according to Table I, were: client-related causes (RII=0.716); labor and equipment category causes (RII=0.701); contractor-related causes (RII=0.698); material-related causes (RII=0.690); design-related causes (RII=0.666); external causes (RII=0.662); and consultant-related causes (RII=0.662). But according to the discussions and given that determining the contractual responsibility of delay is the most likely source of dispute in construction industry and many techniques have been used in the courts to demonstrate the criticalities of a delay event on the project schedule.

All process-based techniques of delay analysis have been present in this paper and categorized in 11 groups. In order to understand the advantages and disadvantages of them by clients, contractor and consultant, a thorough review conducted to reveal the nature of techniques. In the next step, given that selecting the most appropriate technique based on constraints and specific conditions of each project is one of the most important steps to carry out a successful delay analysis. The authors conformed, all process-based techniques of delay analysis, by SCL protocol and AACEI principles. Finally, the result of this match was brought in order to choose the best technique based on the specific circumstances of each project.

This paper aims to evaluate the Digital Government Collaborative Platform (DGCP), which facilitates collaborations between the citizens and the government to address environmental issues in Sri Lanka. The DGCP is an artifact developed by the value-sensitive design approach.

The DGCP is evaluated following the Framework for Evaluation in Design Science Research (FEDS). In total, 224 citizens participated in the survey based on the User Experience Questionnaire (UEQ) and open questions about human values embedded in the design. Fifteen government officers were interviewed to enhance the evaluation.

The DGCP received positive evaluations from the citizens and government officers. The platform is attractive, novel and pragmatic, also generating hedonic experiences for the citizens. The users believed that human values are reflected in the DGCP. Furthermore, they shared a few suggestions to improve it.

The paper contributes knowledge to evaluating digital government systems, especially in developing countries. The human-value-centered DGCP was evaluated using multiple methods of quantitative (i.e. UEQ Survey) and qualitative (i.e. qualitative interviews with stakeholders) techniques. Furthermore, the systematic process of DGCP evaluation produces a case-based guideline for evaluating related and similar digital government systems using FEDS.

Output from the Irish Dairy Industry has grown rapidly since the abolition of quotas in 2015, with processors investing heavily in capacity expansion to deal with the extra milk volumes. Further capacity gains may be achieved by extending the processing season into the winter, a key enabler for which being the reduction of duration of the winter maintenance overhaul period. This paper aims to investigate if Lean Six Sigma tools and techniques can be used to enhance operational maintenance performance, thereby releasing additional processing capacity.

Combining the Six-Sigma Define, Measure, Analyse, Improve, Control (DMAIC) methodology and the structured approach of Turnaround Maintenance (TAM) widely used in process industries creates a novel hybrid model that promises substantial improvement in maintenance overhaul execution. This paper presents a case study applying the DMAIC/TAM model to Ireland’s largest dairy processing site to optimise the annual maintenance shutdown. The objective was to deliver a 30% reduction in the duration of the overhaul, enabling an extension of the processing season.

Application of the DMAIC/TAM hybrid resulted in process enhancements, employee engagement and a clear roadmap for the operations team. Project goals were delivered, and original objectives exceeded, resulting in €8.9m additional value to the business and a reduction of 36% in the duration of the overhaul.

The results demonstrate that the model provides a structure that promotes systematic working and a continuous improvement focus that can have substantial benefits for wider industry. Opportunities for further model refinement were identified and will enhance performance in subsequent overhauls.

To the best of the authors’ knowledge, this is the first time that the structure and tools of DMAIC and TAM have been combined into a hybrid methodology and applied in an Irish industrial setting.

The purpose of this study is to explore how the development of digital trade can provide new development prospects to China's foreign trade under the background of the gradual expansion of China's digital economy and the further release of policy dividends.

Using the methods of literature collection and induction, combined with traditional trade theory, this paper analyzes the characteristics and challenges of digital trade under the background of the digital economy.

The findings reveal that China's digital trade development still faces some risks, such as the containment of China's core technology, digital security and unbalanced development among regions. Considering these risks, China should break through core technical problem, participate in the formulation of international rules to ensure data security, give priority to the development of service trade and improve the unbalanced development of digital trade.

By analyzing the development status and characteristics of the digital economy and digital trade, this paper summarizes the challenges and comparative advantages faced by China's digital trade, and puts forward corresponding suggestions. These suggestions will allow China to take advantage of its rapid digital economy development and occupy a leading position in global digital trade.

This paper creatively expounds on the new development direction of digital trade from the perspective of comparative advantage and risks, and provides some suggestions to expedite China's digital trade development.

Most cervical cancers are caused by genital human papillomavirus (HPV). However, it can be prevented if females receive an HPV vaccine. Nevertheless, there is limited evidence of HPV vaccination and predictors of intention to obtain the vaccine among young women in Thailand. The paper aims to discuss this issue.

This cross-sectional study examined HPV vaccination and factors influencing intention to vaccinate among a convenient sample of college women in Thailand. The data collection was conducted via a self-administered “HPV and HPV vaccine-related knowledge, attitudes, and behaviors” questionnaire.

Out of 1,030 participants, 309 (30.0 percent) were aware of HPV and the HPV vaccine. Out of these, 257 participants reported that they had not obtained the vaccine and 18 participants were unsure if they had already obtained the vaccine or not. Only 34 participants confirmed that they had received the vaccine. Among those who were aware of HPV and the HPV vaccine, 56.4 percent of them did not know that most HPV-infected persons do not show any signs or symptoms, and 53.3 percent thought that the vaccine provided protection against other sexually transmitted infections as well. Most had positive attitudes toward vaccination and subjective norms. Among the participants who had not received the vaccine, the intention to obtain the vaccine was predicted by age, knowledge, attitudes toward vaccination, and subjective norms. The reasons for not being vaccinated included the cost of the vaccine, lack of knowledge, and perception of themselves being at low risk.

This study found low HPV vaccination among college women. However, those who had not received the vaccine intended to obtain the vaccine at some point in the future. An HPV vaccination campaign may be well tailored in order to increase the intention to obtain the vaccine which, in turn, may increase the HPV vaccination. Vaccination cost sharing should be discussed among Thai policy makers in order to alleviate the financial burden for women.