Search results

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

This study proposes a predictive neural network model reference decoupling control method for the coupling problem between the leg joints of hydraulic quadruped robots, and verifies its decoupling effect..

The machine–hydraulic cross-linking coupling is studied as the coupling behavior of the hydraulically driven quadruped robot, and the mechanical dynamics coupling force of the robot system is controlled as the disturbance force of the hydraulic system through the Jacobian matrix transformation. According to the principle of multivariable decoupling, a prediction-based neural network model reference decoupling control method is proposed; each module of the control algorithm is designed one by one, and the stability of the system is analyzed by the Lyapunov stability theorem.

The simulation and experimental research on the robot joint decoupling control method is carried out, and the prediction-based neural network model reference decoupling control method is compared with the decoupling control method without any decoupling control method. The results show that taking the coupling effect experiment between the hip joint and knee joint as an example, after using the predictive neural network model reference decoupling control method, the phase lag of the hip joint response line was reduced from 20.3° to 14.8°, the amplitude attenuation was reduced from 1.82% to 0.21%, the maximum error of the knee joint coupling line was reduced from 0.67 mm to 0.16 mm and the coupling effect between the hip joint and knee joint was reduced from 1.9% to 0.48%, achieving good decoupling.

The prediction-based neural network model reference decoupling control method proposed in this paper can use the neural network model to predict the next output of the system according to the input and output. Finally, the weights of the neural network are corrected online according to the predicted output and the given reference output, so that the optimization index of the neural network decoupling controller is extremely small, and the purpose of decoupling control is achieved.

The purpose of this study is to test whether equity theory (ET) – which posits that individuals compare their outcome/input ratio to the ratio of a “comparison other” and classify individuals as Benevolent, Equity Sensity, and Entitled – applies to the modern workplace of global virtual teams (GVT), where work is mostly intellectual, geographically dispersed and online, making individual effort nearly impossible to observe directly.

Using a sample of 1,343 GVTs comprised 6,347 individuals from 137 countries, this study tests three ET’s predictions in the GVT context: a negative, linear relationship between Benevolents’ perceptions of equity and job satisfaction in GVTs; an inverted U-shaped relationship between Equity Sensitives’ perceptions of equity and job satisfaction in GVTs; and a positive, linear relationship between Entitleds’ perceptions of equity and job satisfaction in GVTs.

Although the second prediction of ET is supported, the first and third have statistically significant opposite signs.

The research has important ramifications for management studies in explaining differences in organizational behavior in GVTs as opposed to traditional work settings.

The authors conclude that the main novelty with ET in GVTs is that GVTs are an environment stingy with satisfaction for “takers” (Entitleds) and generous in satisfaction for “givers” (Benevolents).

Professional sports teams employ highly paid managers and coaches to train players and make tactical and strategic team decisions. A large literature analyzes the impact of manager decisions on team outcomes. Empirical analysis of manager decisions requires a quantifiable proxy variable for manager decisions. Previous research focused on manager dismissals, tenure on teams, the number of substitutions made in games or the number of healthy players on rosters held out of games for rest, generally finding small positive impacts of manager decisions on team success.

The authors quantify manager decisions by developing a novel measure of game-specific coaching decisions: the Herfindahl–Hirschman Index (HHI) of playing-time across players on a team roster over the course of a season.

Evidence from two-way fixed effects regression models explaining observed variation in National Basketball Association team winning percentage over the 1999–2000 to 2018–2019 seasons show a significant association between managers’ allocation of playing time and team success. A one standard deviation change in playing-time HHI that reflects a flattened distribution of player talent is associated with between one and two additional wins per season, holding the talent of players on the team roster constant. Heterogeneity exists in the impact across teams with different player talent.

This is one of the first papers to examine playing-time concentration in the NBA. The results are important for understanding how managerial decisions about resource allocation lead to sustained competitive advantage. Linking coaching decisions to wins can help teams to better promote this core product.

The purpose of this chapter is to cover banking efficiency using the concept of the Meta frontier function and to study group and subgroup differences in the production technology. This study estimates the technical efficiency (TE) and technology gap ratios (TGRs) for banks in Islamic countries. Using the assumption of the convex hull of the Meta frontier production set using the virtual Meta frontier within the nonparametric approach as presented by Battese and Rao (2002), Battese et al. (2004), and O'Donnell et al. (2007, 2008) and after relaxing this assumption, the study investigates if there is a significant difference between these two methods. To overcome the deterministic criterion addressed to nonparametric approach, the bootstrapping technique has been applied. The first part of this chapter covers the analytical framework necessary for the definition of a Meta frontier function and its estimation using nonparametric data envelopment analysis (DEA) in the case where we impose the assumption of the convex production set and follows in the case of relaxation of this assumption. Then we estimated the TE and the TGR in concave and nonconcave Meta frontier cases by applying the Bootstrap-DEA approach. The empirical part will be reserved for highlighting these methods on data bank to study the technical and technological performance level and prove if there is a difference between the two methods. Three groups of banks namely commercial, investment, and Islamic banks in 17 Islamic countries over a period of 16 years between 1996 and 2011 are used.

The concept of productivity is central to performance management and decision-making, although it is complex and multifaceted. This paper aims to describe a methodology based on the use of Big Data in a cluster analysis combined with a data envelopment analysis (DEA) that provides accurate and reliable productivity measures in a large network of retailers.

The methodology is described using a case study of a leading kitchen furniture producer. More specifically, Big Data is used in a two-step analysis prior to the DEA to automatically cluster a large number of retailers into groups that are homogeneous in terms of structural and environmental factors and assess a within-the-group level of productivity of the retailers.

The proposed methodology helps reduce the heterogeneity among the units analysed, which is a major concern in DEA applications. The data-driven factorial and clustering technique allows for maximum within-group homogeneity and between-group heterogeneity by reducing subjective bias and dimensionality, which is embedded with the use of Big Data.

The use of Big Data in clustering applied to productivity analysis can provide managers with data-driven information about the structural and socio-economic characteristics of retailers' catchment areas, which is important in establishing potential productivity performance and optimizing resource allocation. The improved productivity indexes enable the setting of targets that are coherent with retailers' potential, which increases motivation and commitment.

This article proposes an innovative technique to enhance the accuracy of productivity measures through the use of Big Data clustering and DEA. To the best of the authors’ knowledge, no attempts have been made to benefit from the use of Big Data in the literature on retail store productivity.

Developing a reliable cost estimate at the early stage of construction projects is challenging due to inadequate project information. Most of the information during this stage is qualitative, posing additional challenges to achieving accurate cost estimates. Additionally, there is a lack of tools that use qualitative project information and forecast the budgets required for project completion. This research, therefore, aims to develop a model for setting project budgets (excluding land) during the pre-conceptual stage of residential buildings, where project information is mainly qualitative.

Due to the qualitative nature of project information at the pre-conception stage, a natural language processing model, DistilBERT (Distilled Bidirectional Encoder Representations from Transformers), was trained to predict the cost range of residential buildings at the pre-conception stage. The training and evaluation data included 63,899 building permit activity records (2021–2022) from the Victorian State Building Authority, Australia. The input data comprised the project description of each record, which included project location and basic material types (floor, frame, roofing, and external wall).

This research designed a novel tool for predicting the project budget based on preliminary project information. The model achieved 79% accuracy in classifying residential buildings into three cost_classes ($100,000-$300,000, $300,000-$500,000, $500,000-$1,200,000) and F1-scores of 0.85, 0.73, and 0.74, respectively. Additionally, the results show that the model learnt the contextual relationship between qualitative data like project location and cost.

The current model was developed using data from Victoria state in Australia; hence, it would not return relevant outcomes for other contexts. However, future studies can adopt the methods to develop similar models for their context.

This research is the first to leverage a deep learning model, DistilBERT, for cost estimation at the pre-conception stage using basic project information like location and material types. Therefore, the model would contribute to overcoming data limitations for cost estimation at the pre-conception stage. Residential building stakeholders, like clients, designers, and estimators, can use the model to forecast the project budget at the pre-conception stage to facilitate decision-making.

Amidst unpredictable and turbulent periods, such as the COVID-19 pandemic, service organization’s responses are required to be innovative, adaptable and resilient. The purpose of this study is to explore the utilization of both reconfiguration and transformational strategies as instruments for cultivating resilience and advancing sustainability in service organizations.

The study examines a proposed resilience model using fuzzy logic. The research also used a semantic differential scale to capture nuanced and intricate attitudes. Finally, to augment the validity of the resilience model, a measurement scale was formulated using business mathematics and expert opinions.

Although investing in resilience training can help organizations gain control and maintain their operations in times of crisis, it may not directly help service organizations understand the external turmoil, seek available resources or create adaptive remedies. Conversely, high levels of reconfiguration and transformation management vigour empower a service organization’s revolutionary, malleable vision, organizational structure and decision-making processes, welcoming talented and innovative employees to enhance capabilities during crises.

The resilience model bestows a comprehensive understanding of the pertinence of building resilience for service organizations identifying the antecedents that influence the adoption of these strategies and introduces a range of theoretical perspectives that empowers service organizations to conceptualize and plan for building resilience. The research guides service organizations to become more resilient to external shocks and adapt to changing circumstances by diversifying their offerings, optimizing their resources and adopting flexible work arrangements. The study elaborates on the enhancement of resilience, increasing innovation, improving efficiency and enhancing customer satisfaction for service organizations to remain competitive and contribute to positive social and economic outcomes through the adoption of both reconfiguration and transformational strategies.

The study also guides the service organizations to become more resilient to external shocks and adapt to changing circumstances by diversifying their offerings, optimizing their resources and adopting flexible work arrangements. Rapid innovation and business model innovation are essential components, enabling service organizations to foster a culture of innovation and remain competitive. In addition, the adoption can lead to improved financial performance, job creation and economic growth, contributing to positive social and economic impacts.

The resilience model bestows a comprehensive understanding of the pertinence of building resilience for service organizations. It identifies the antecedents that influence the adoption of these strategies and introduces a range of theoretical perspectives that empowers service organizations to conceptualize and plan for building resilience. The research also provides a foundation for further investigation into the effectiveness of these strategies and their impact on organizational performance and sustainability. By better preparing service organizations for disruptions and uncertainties, this research triggers ameliorated organizational performance and sustainability.

Within the realm of the service industry, the present investigation has undertaken the development, quantification and scrutiny of both resilience and tenacity. In addition, it has delved into the intricate dynamics surrounding the influencing factors and antecedents that bear upon resilience, elucidating their consequential impact on the operational performance and outlook of service-oriented organizations. The findings derived from this research furnish valuable insights germane to enhancing operational efficacy and surmounting impediments within the sector.

This study aims to analyze the effectiveness and efficiency of research-based community service programs in Indonesia that used government funds in 2017–2021.

The design of this research is a quantitative research method using a data envelopment analysis to evaluate 370 leading universities in Indonesia. Furthermore, six analytical models were considered to compare effectiveness and efficiency between universities. It involved two resource (budget and staff academic involved), three output (intellectual property, prototype and publication) and three outcome variables (economic impact, social impact and capacity building).

The findings showed that several universities are considered necessary, with great potential to increase output and outcome efficiency in community involvement. The study mapped and divided the position of 370 universities for additional information. The effectiveness aspect provides another perspective in assessing the performance of tertiary institutions in Indonesia and can be an option for evaluating research performance to improve the quality of output.

The authors use data from research and community service management information systems used, both the resources used and the results. Efficiency and effectiveness of 370 universities were compared in this study, including comparing their position on the previous assessment with the assessment of the results of this study. Approach to the concept of Mandl et al. (2008) regarding the relationship between input, output and outcome as the main component of the indicators, the authors apply to analyze efficiency and effectiveness.

COVID-19 has affected the economies adversely from all sides. The sudden halt in production has impacted both the supply and demand sides. It calls for analysis to quantify the impact of the reduction in economic activity on the economy-wide variables so that appropriate steps can be taken. This study aims to evaluate the sensitivity of various sectors of the Indian economy to this dual shock.

The eight-sector open economy general equilibrium Global Trade Analysis Project (GTAP) model has been simulated to evaluate the sector-specific effects of a fall in economic activity due to COVID-19. This model uses an economy-wide accounting framework to quantify the impact of a shock on the given equilibrium economy and report the post-simulation new equilibrium values.

The empirical results state that welfare for the Indian economy falls to the tune of 7.70% due to output shock. Because of demand–supply linkages, it also impacts the inter- and intra-industry flows, demand for factors of production and imports. There is a momentous fall in the demand for factor endowments from all sectors. Among those, the trade-hotel-transport and manufacturing sectors are in the first two positions from the top. The study recommends an immediate revival of the manufacturing and trade-hotel-transport sectors to get the Indian economy back on track.

The present study has modified the existing GTAP model accounting framework through unemployment and output closures to account for the impact of change in sectoral output due to COVID-19 on the level of employment and other macroeconomic variables.