Search results

The relationship between industrial policy and exploratory innovation is imperfect.

The authors use Chinese high-tech enterprise identification policy (HTEP) as a natural experimental group to test policy impacts, spillover effects and mechanisms of action.

First, HTEP promotes exploratory innovation. In addition, HTEP has a greater impact on non-exploratory innovation. Second, HTEP has spillover effects in two phases: HTEP (2008) and the 2016 policy reform. HTEP affects exploratory innovation in nearby non-high-tech firms, and the policy effect decreases monotonically with increasing distance from the treatment group. Third, HTEP affects innovation capacity through financing constraints, technical personnel flow and knowledge flow, which explains not only policy effects but also spillover effects. Fourth, the analysis of policy heterogeneity shows that the 2016 policy reforms reinforce the positive effect of HTEP (2008). By deducting the effects of other policies, the HTEP effect is found to be less volatile. In terms of the continuity of policy identification, continuous uninterrupted identification has a crucial impact on the improvement of firms’ innovation capacity compared to repeated certification and certification expiration. Finally, HTEP has a crowding-out effect in state-owned enterprises and large firms’ innovation.

This paper contributes to the existing literature in several ways. First, the authors enrich the literature on industrial policy through exploratory innovation research. While previous studies have focused on R&D investment and patents (Dai and Wang, 2019), exploratory innovation helps firms break away from the inherent knowledge mindset and achieve sustainable innovation. Second, few studies have explored the characteristics of industrial policies. In this paper, the authors subdivide the sample into repeated certification, continuous certification and certification expiration according to high-tech enterprise identification. In addition, the authors compare the differences in policy implementation effects between the 2016 policy reform and the 2008 policy to provide new directions for business managers and policy makers. Third, innovation factors guided by industrial policies may cluster in specific regions, which in turn manifest externalities. This is when the policy spillover effect is worth considering. This paper fills a gap in the industrial policy literature by examining the spillover effects. Finally, this paper also explores the mechanisms of policy effects from three perspectives: financing constraints, technician mobility and knowledge mobility, which can affect not only the innovation of beneficiary firms directly but also indirectly the innovation of neighboring non-beneficiary firms.

This paper investigates the effect of state-society relations on the industrially-related growth paths of developed countries.

It introduces a novel theoretical framework, the state-business-labor relations (SBLR) framework, where four main actors are identified: the state, big businesspersons or tycoons, owners and managers of small and medium enterprises (SMEs) or Entrepreneurs and labor. Different SBLR categories or modes are introduced depending on levels of coordination and power relations between the studied actors. The paper then investigates how these SBLR modes, through adopting various policies targeting the industrial sector, lead to different growth paths. Rather than focusing only on economic growth, this research regards a growth path as a matrix of the performance in long-run growth and equality of distribution.

Using regression analysis and statistical data, the results suggest that the Co-Balanced mode, having higher levels of coordination and lower favoritism, leads to the best growth path among the four introduced modes, especially with its emphasis on high levels of venture capital availability and easiness of starting business. while the Lib-Capture mode, characterized by lower coordination and higher favoritism, seems to have the worst growth path and the best implemented policy for this mode is suggested to be high profit taxes that seem to counter the negative impact of the existing high levels of favoritism.

Despite the important findings that this research has reached, this paper is mainly meant to open a further investigation into this topic and open this dimension that the research on VoC and political economy have under-researched. A deeper investigation of SBLR typologies that could only be possible by having richer datasets with more data on coordination for the whole world, rather than only the advanced economies, would further our understanding of the dynamics that shape the growth paths of different countries of the world.

To realize the best industrial growth path, fighting favoritism should be an important objective. The negative impact of favoritism on innovation could not be disregarded in the eve of the fourth industrial revolution, where innovation is increasingly pivotal to future industrial development. Actively engaging societal groups in the policymaking process is important in addressing their concerns and balancing them at the same time. This should lead to the double benefit of formulating better policies that should foster growth as well as provide better distribution of this growth. High levels of coordination should help in realizing this objective. Yet, this could only be possible if societal groups are free to associate and aggregate their power and when there are means of preventing one actor from gaining more favorite treatment and exclusive influence over policymakers. The presence of both powerful and broadly represented business associations and labor unions and the existence of a government interested in coordinating their efforts-rather than letting itself be controlled by one group at the expense of the others-should help in the realization of the best growth path. Thus, institutional reform that empowers societal groups and enables them to defend their interests as well as fights all forms of corruption should lead to the realization of a more prosperous and equitable industrial development, with the “re-industrialization” of the developed world being no exception. The technological and social challenges of intensive automation and digitalization accompanying the fourth industrial revolution make the envisaged institutional reform more urgent.

This paper is introducing a novel theoretical framework for studying the effect of state-society relations, particularly SBLR, on the industrial growth paths of developed countries. It integrates three important bodies of literature in order to build a more comprehensive understanding of the dynamics of state-society relations and their economic consequences. These are the Varieties of Capitalism (VoC), State-Business Relations (SBR) and Industrial Relations. The SBLR framework differentiates between tycoons and entrepreneurs, an important distinction that often goes unnoticed. Different SBLR categories or modes are introduced, depending on levels of coordination and power relations between the actors. It is proposed in this research that the effect on growth paths goes beyond the simple dichotomy between CMEs and LMEs usually present in the literature of VoC and that power relations provide an essential complementary dimension in explaining this causality.

Green innovation in supply chains is crucial for socioeconomic development and stability. Factors that influence collaborative green innovation in the supply chain are complex and diverse. Exploring the main influencing factors and their mechanisms is essential for promoting collaborative green innovation in supply chains. Therefore, this study analyzes how upstream and downstream enterprises in the supply chain collaborate to develop green technological innovations, thereby providing a theoretical basis for improving the overall efficiency of the supply chain and advancing green innovation technology.

Based on evolutionary game theory, this study divides operational scenarios into pure market and government-regulated operations, thereby constructing collaborative green innovation relationships in different scenarios. Through evolutionary analysis of various entities in different operational scenarios, combined with numerical simulation analysis, we compared the evolutionary stability of collaborative green innovation behavior in supply chains with and without government regulation.

Under pure market mechanisms, the higher the green innovation capability, the stronger the willingness of various entities to collaborate in green innovation. However, under government regulation, a decrease in green innovation capability increases the willingness to collaborate with various entities. Environmental tax rates and green subsidy levels promote collaborative innovation in the short term but inhibit collaborative innovation in the long term, indicating that policy orientation has a short-term impact. Additionally, the greater the penalty for collaborative innovation breaches, the stronger the intention to engage in collaborative green innovation in the supply chain.

We introduce the factors influencing green innovation capability and social benefits in the study of the innovation behavior of upstream and downstream enterprises, expanding the research field of collaborative innovation in the supply chain. By comparing the collaborative innovation behavior of various entities in the supply chain under a pure market scenario and government regulations, this study provides a new perspective for analyzing the impact of corresponding government policies on the green innovation capability of upstream and downstream enterprises, enriching theoretical research on green innovation in the supply chain to some extent.

In a complex, ever-changing, and turbulent business world, encouraging employees to express their improvement-oriented novel ideas through voice behavior is crucial for organizations to survive and thrive. Understanding how to foster employee promotive voice at work is a significant issue for both researchers and managers. This study explores how to foster employee promotive voice through specific HRM practices and positive employee attitudes. It also examines the effect of employee promotive voice on perceived organizational performance.

This study employed a time-lagged multisource survey design. Data were collected from 215 executives, 790 supervisors, and 1,004 employees in 113 firms, and analyzed utilizing a multilevel moderated serial mediation model.

The findings of this study revealed that promotive voice was significantly related to perceived organizational performance. Innovation-enhancing HRM was positively associated with employee promotive voice. The HRM-voice relationship was partially mediated by employee job satisfaction. Power distance orientation was found to significantly moderate the relationship between innovation-enhancing HRM and employee job satisfaction at the firm level. Our findings showed that innovation-enhancing HRM policies may fail to foster promotive voice if they do not enhance employee job satisfaction.

This study challenges some taken-for-granted assumptions in the literature such as any high performance HRM bundles (e.g. HPWS) can foster employee promotive voice, and the effects of HRM are direct and even unconditional on organizational outcomes. It emphasizes the need to avoid potential unintended effects of HRM on employee voice and the importance of contextualizing voice research.

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

While digital transformation holds immense promise, organizations often fail to realize its benefits. This study aims to address how policies for digital transformation benefits realization are translated into practice.

The authors apply a qualitative, comparative case study of two large, public-sector health care organizations in Sweden. Through document and interview data, the authors analyze the process of translation.

The study finds that practice variation is primarily caused by two types of decoupling: policy-practice and means-ends. Contrary to previous studies, coercion in policy compliance is not found to decrease practice variation.

The limitations primarily stem from the empirical selection of two large public health-care organizations in Sweden, affecting the study’s generalizability. Reducing practice variation is more effectively achieved through goal alignment than coercion, leading to implications for the design of governance and control.

Policymakers should, instead of focusing on control-related compliance, work to align organizational objectives and policies to decrease practice variation for successful benefits realization.

The study contributes to better benefits realization of digital transformation initiatives in health care. As such, the authors contribute to a better functioning and more transformative health care in times of increased demand and decreased supply of health-care services.

The study challenges conventional wisdom by identifying that coercion is less effective than goal alignment in reducing practice variation, thereby enhancing the understanding of policy implementation dynamics in health-care settings.

This paper aims to identify how a public client’s use of control systems (process, output and social control) affect innovation possibilities in construction projects.

Semi-structured interviews about six infrastructure projects were conducted to identify respondents’ views on innovation possibilities. These possibilities were then analyzed from an organizational control perspective within principal–agent relationships between the Swedish Transport Administration (STA) and their contractors.

How the client uses control systems affects innovation possibilities. Relying on process control could negatively affect innovation opportunities, whereas output control could have a positive influence. In addition, social control seems to have a weak effect, as the STA appears not to use social control to facilitate joint innovation. Public clients must comply with the Public Procurement Act and, therefore, retain the requirements specified in the tendering documents. Much of the steering of the execution is connected to the ex ante phase (before signing the contract), which affects innovation possibilities in the design and execution phases for the contractor.

This study was conducted with only one client, thus limiting its generalizability. However, the findings provide an important stepping stone to further investigation into balancing control systems and creating innovation possibilities in a principal–agent relationship.

Although public procurement has increasingly been emphasized as a major potential source of innovation, studying how a public client’s use of organizational control systems affects innovation possibilities in the construction sector has received scant attention.

Open innovation (OI), by now one of the major concepts for the analysis of innovation, is seen as a methodology for collaboratively designing and implementing solutions by engaging stakeholders in an iterative and inclusive service design process. This paper aims to empirically investigate OI capacities, defined as a cooperative, knowledge-sharing innovation ecosystem, and to explore how it can lead to improved performance of firms in Central and Eastern European (CEE) and Southeastern European (SEE) countries.

The study builds on the World Bank/European Bank for Reconstruction and Development (EBRD’s) Business Environment Enterprise Performance Survey (BEEPS) dataset for 2009, 2013 and 2019. Primarily, the research model was estimated using log-transformed ordinary least squares (OLS). Taking into consideration that this method might produce substantial bias, yielding misleading inferences, this study is fitting Poisson pseudo maximum likelihood estimators with robust standard errors and instrumental variable/generalized method of moments estimation (IV/GMM) approach for comparative results. Secondarily, the research model was tested using structural equation modelling (SEM) to investigate the relationship between five OI capacities and firm performance.

The findings indicate that there is a significant positive relationship between most OI capacities and firm performance, except for innovation, which did not show a statistically significant relationship with firm performance. Specifically, research and development (R&D), knowledge and coopetition are statistically significant and positively associated with firm performance, whereas transformation is statistically significant but negatively associated with firm performance. The IV/GMM estimations’ findings support the view that the firm performance is significantly affected by OI capacities, together with some control variables such as size, age, foreign ownership and year dummy to have a significant impact on firm performance.

This paper fills an identified gap in the literature by investigating the impact of OI on firm performance executed in the specific CEE and SEE country context.

The shift toward a circular economy (CE) represents a collaborative endeavor necessitating the presence of efficient frameworks, conducive contexts and a common comprehension. This research serves as a pivotal stride towards this goal, presenting an exclusive prospect for the investigation and fusion of these frameworks, with particular emphasis on the Quintuple Helix Model (5HM), into a unified theoretical framework that underscores the core principles of the CE. This study is centered on three pivotal questions aimed at decoding the CE transition in specific regional settings.

Adopting an abductive approach firmly anchored in a two-stage qualitative process, this study specifically merges the foundational principles from institutional theory, entrepreneurship literature and CE frameworks to provide insights into the dynamics of circular ecosystems, with a specific focus on the Huelva region in Spain.

The findings demonstrate significant potential in the CE, ranging from the integration of product and service systems to innovations in eco-industrial practices. Yet, a notable deficiency exists: the absence of institutional entrepreneurs, highlighting the essential role that universities can play. As recognized centers of innovation, universities are suggested to be key contributors to the transformation toward a CE, aligning with their societal and economic responsibilities.

This study highlights the importance of managing relationships with entities like SMEs and policymakers or academia for effective CE adoption. Policymakers can refine strategies based on the research’s insights, while the impact of university-driven circular ecosystems on sustainable societies is another crucial area for research.

The sustainability models cited in CE literature may not be comprehensive enough to prevent problem shifting, and it can be argued that they lack a sound theoretical and conceptual basis. Furthermore, the connections between sustainability objectives and the three levels of the CE operating system remain vague. Additionally, there is insufficient information on how regions foster the involvement of the environment in fivefold helix cooperation and how this impacts the CE.

The purpose of this study is to describe latent classes explaining the innovation logic in the Finnish construction companies. Innovativeness is a driver of competitive performance and vital to the long-term success of any organisation and company.

Using finite mixture structural equation modelling (FMSEM), the authors have classified innovation logic into latent classes. The method analyses and recognises classes for companies that have similar logic in innovation activities based on the collected data.

Through FMSEM analysis, the authors have identified three latent classes that explain the innovation logic in the Finnish construction companies – LC1: the internal innovators; LC2: the non-innovation-oriented introverts; and LC3: the innovation-oriented extroverts. These three latent classes clearly capture the perceptions within the industry as well as the different characteristics and variables.

The presented latent classes explain innovation logic but is limited to analysing Finnish companies. Also, the research is quantitative by nature and does not increase the understanding in the same manner as qualitative research might capture on more specific aspects.

This paper presents starting points for construction industry companies to intensify innovation activities. It may also indicate more fundamental changes for the structure of construction industry organisations, especially by enabling innovation friendly culture.

This study describes innovation logic in Finnish construction companies through three models (LC1–LC3) by using quantitative data analysed with the FMSEM method. The fundamental innovation challenges in the Finnish construction companies are clarified via the identified latent classes.