Search results

In pursuit of affordable and nutrient-rich food alternatives, the symbiotic culture of bacteria and yeast (SCOBY) emerged as a selected food ink for 3D printing. The purpose of this paper is to harness SCOBY’s potential to create cost-effective and nourishing food options using the innovative technique of 3D printing.

This work presents a comparative analysis of the printability of SCOBY with blends of wheat flour, with a focus on the optimization of process variables such as printing composition, nozzle height, nozzle diameter, printing speed, extrusion motor speed and extrusion rate. Extensive research was carried out to explore the diverse physical, mechanical and rheological properties of food ink.

Among the ratios tested, SCOBY, with SCOBY:wheat flour ratio at 1:0.33 exhibited the highest precision and layer definition when 3D printed at 50 and 60 mm/s printing speeds, 180 rpm motor speed and 0.8 mm nozzle with a 0.005 cm³/s extrusion rate, with minimum alteration in colour.

Food layered manufacturing (FLM) is a novel concept that uses a specialized printer to fabricate edible objects by layering edible materials, such as chocolate, confectionaries and pureed fruits and vegetables. FLM is a disruptive technology that enables the creation of personalized and texture-tailored foods, incorporating desired nutritional values and food quality, using a variety of ingredients and additions. This research highlights the potential of SCOBY as a viable material for 3D food printing applications.

Polymethyl methacrylate (PMMA) is a remarkable biocompatible material for bone cement and regeneration. It is also considered 3D printable but requires in-depth process–structure–properties studies. This study aims to elucidate the mechanistic effects of processing parameters and sterilization on PMMA-based implants.

The approach comprised manufacturing samples with different raster angle orientations to capitalize on the influence of the filament alignment with the loading direction. One sample set was sterilized using an autoclave, while another was kept as a reference. The samples underwent a comprehensive characterization regimen of mechanical tension, compression and flexural testing. Thermal and microscale mechanical properties were also analyzed to explore the extent of the appreciated modifications as a function of processing conditions.

Thermal and microscale mechanical properties remained almost unaltered, whereas the mesoscale mechanical behavior varied from the as-printed to the after-autoclaving specimens. Although the mechanical behavior reported a pronounced dependence on the printing orientation, sterilization had minimal effects on the properties of 3D printed PMMA structures. Nonetheless, notable changes in appearance were attributed, and heat reversed as a response to thermally driven conformational rearrangements of the molecules.

This research further deepens the viability of 3D printed PMMA for biomedical applications, contributing to the overall comprehension of the polymer and the thermal processes associated with its implementation in biomedical applications, including personalized implants.

Digital transformation (DT) innovation is a monumental contribution that has had a profound effect on several worldwide industries. The aim of this research is to evaluate the current and future trends in DT specifically focusing in construction industry.

This study adopts a qualitative analysis approach grounded on descriptive and bibliometric analyses. In total, 283 papers from Scopus between January 2015 and April 2023 were retrieved in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) review methodology. This study examines the publishing trends, most productive nation, university, publications and authors. Keyword co-occurrence analysis and thematic evolution were analyzed through Vosviewer and Biblioshiny.

The results illustrate a growing desire to use digital technologies in the construction industry, which shows the topic's power and expanding popularity. This research reveals various emerging themes based on technology usage in construction sector. Out of 14 themes, occupational health and safety, mass customization, virtual reality and artificial intelligence were identified as isolated themes. Further, this study elaborates the difficulties encountered by the construction industry while employing digital technologies and examines the interrelationships among various keywords in DT and reveals the paradoxes and hotspots.

This research adds to the body of literature as it identifies the research areas and gaps in the existing DT domain in construction industry. The integration of technology in this sector has an intense positive future vision as various subareas have immense potential for technology application.

Amidst compounding crises and increasing global population’s nutritional needs, food supply chains are called to address the “diet–environment–health” trilemma in a sustainable and resilient manner. However, food system stakeholders are reluctant to act upon established protein sources such as meat to avoid potential public and industry-driven repercussions. To this effect, this study aims to understand the meat supply chain (SC) through systems thinking and propose innovative interventions to break this “cycle of inertia”.

This research uses an interdisciplinary approach to investigate the meat supply network system. Data was gathered through a critical literature synthesis, domain-expert interviews and a focus group engagement to understand the system’s underlying structure and inspire innovative interventions for sustainability.

The analysis revealed that six main sub-systems dictate the “cycle of inertia” in the meat food SC system, namely: (i) cultural, (ii) social, (iii) institutional, (iv) economic, (v) value chain and (vi) environmental. The Internet of Things and innovative strategies help promote sustainability and resilience across all the sub-systems.

The study findings demystify the structure of the meat food SC system and unveil the root causes of the “cycle of inertia” to suggest pertinent, innovative intervention strategies.

This research contributes to the SC management field by capitalising on interdisciplinary scientific evidence to address a food system challenge with significant socioeconomic and environmental implications.

The pressing issues of climate change and environmental degradation call for a reevaluation of how we approach economic activities. Both leaders and corporations are now shifting their focus, toward adopting practices and embracing the concept of circular economy (CE). Within this context, the Food and Beverage (F&B) sector, which significantly contributes to greenhouse gas (GHG) emissions, holds the potential for undergoing transformations. This study aims to explore the role that Artificial Intelligence (AI) can play in facilitating the adoption of CE principles, within the F&B sector.

This research employs the Best Worst Method, a technique in multi-criteria decision-making. It focuses on identifying and ranking the challenges in implementing AI-driven CE in the F&B sector, with expert insights enhancing the ranking’s credibility and precision.

The study reveals and prioritizes barriers to AI-supported CE in the F&B sector and offers actionable insights. It also outlines strategies to overcome these barriers, providing a targeted roadmap for businesses seeking sustainable practices.

This research is socially significant as it supports the F&B industry’s shift to sustainable practices. It identifies key barriers and solutions, contributing to global climate change mitigation and sustainable development.

The research addresses a gap in literature at the intersection of AI and CE in the F&B sector. It introduces a system to rank challenges and strategies, offering distinct insights for academia and industry stakeholders.

The purpose of this paper is to study the aerodynamic characteristics of Ahmed body in longitudinal and lateral platoons under crosswind by computational fluid dynamics simulation. It helps to improve the aerodynamic characteristics of vehicles by providing theoretical basis and engineering direction for the development and progress of intelligent transportation.

A two-car platoon model is used to compare with the experiment to prove the accuracy of the simulation method. The simplified Ahmed body model and the Reynolds Averaged N-S equation method are used to study the aerodynamic characteristics of vehicles at different distances under cross-winds.

When the longitudinal distance x/L = 0.25, the drag coefficients of the middle and trailing cars at β = 30° are improved by about 272% and 160% compared with β = 10°. The side force coefficients of the middle and trailing cars are increased by 50% and 62%. When the lateral distance y/W = 0.25, the side force coefficients of left and middle cars at β = 30° are reduced by 38% and 37.5% compared with β = 10°. However, the side force coefficient of the right car are increased by about 84.3%.

Most of the researches focus on the overtaking process, and there are few researches on the neat lateral platoon. The innovation of this paper is that in addition to studying the aerodynamic characteristics of longitudinal driving, the aerodynamic characteristics of neat lateral driving are also studied, and crosswind conditions are added. The authors hope to contribute to the development of intelligent transportation.

This study aims to clarify the evolution law of stress field and fracture field during the mining process of inclined coal seam, to prevent the occurrence of roof burst water and impact ground pressure accident during the advancing process of working face.

The evolution law of stress-fracture field under different mining conditions of inclined coal seam was studied by using discrete element method and similar material simulation method.

The overburden stress at the lower end of the coal seam was mainly transmitted to the deep rock mass on the left side, and the overburden stress at the upper end was mainly transmitted to the floor direction. With the increase of the inclined length of the mining coal seam, the development of the fracture zone gradually evolves from the “irregular arch” form to the “transversely developed trapezoid” form. The development range of the fracture zone was always in the internal area of the stress concentration shell.

An original element of this paper is based on the condition that the dip angle of coal seam is 35°, and the evolution law of overburden stress-fracture field during the excavation of coal seam with different lengths was analyzed by UDEC numerical simulation software. The coupling relationship between stress shell and fracture field was proposed, and the development range of fracture zone was determined by stress. The value of this paper is to provide technical support and practical basis for the safety production of a mine working face.

This paper aims to refine the mechanisms affecting the two-way technology spillover and carbon transfer interactions between supply chain enterprises, and to guide their reduction of carbon emissions.

This study formulates a supplier-led Stackelberg game model to explore the effects of the interactions between two-way technology spillover effects and carbon transfers in decentralized and centralized decision-making scenarios. The optimized Shapley value is introduced to coordinate across the supply chain and determine the overall profits lost in the decentralized scenario.

Emission reductions by the low-carbon manufacturer are negatively correlated with the carbon transfers. Vertical technology spillovers promote carbon reduction, whereas horizontal technology spillovers inhibit it. The vertical technology spillovers amplify the negative effects of the carbon transfers, whereas the horizontal technology spillovers alleviate these negative effects. When the vertical technology spillover effect is strong or the horizontal technology spillover effect is weak in the centralized scenario, the carbon reduction is negatively correlated with the carbon transfers. Conversely, when the vertical technology spillover effect is weak or the horizontal technology spillover effect is strong, the enterprise’s carbon reduction is positively correlated with the carbon transfers. An optimized Shapley value can coordinate the supply chain.

This study examines the effects of carbon transfers on enterprises from a micro-perspective and distinguishes between vertical and horizontal technology spillovers to explore how carbon transfers and different types of technology spillovers affect enterprises’ decisions to reduce carbon emissions.

The development of new advanced materials, such as photopolymerizable resins for use in stereolithography (SLA) and Ti6Al4V manufacture via selective laser melting (SLM) processes, have gained significant attention in recent years. Their accuracy, multi-material capability and application in novel fields, such as implantology, biomedical, aviation and energy industries, underscore the growing importance of these materials. The purpose of this study is oriented toward the application of new advanced materials in stent manufacturing realized by 3D printing technologies.

The methodology for designing personalized medical devices, implies computed tomography (CT) or magnetic resonance (MR) techniques. By realizing segmentation, reverse engineering and deriving a 3D model of a blood vessel, a subsequent stent design is achieved. The tessellation process and 3D printing methods can then be used to produce these parts. In this context, the SLA technology, in close correlation with the new types of developed resins, has brought significant evolution, as demonstrated through the analyses that are realized in the research presented in this study. This study undertakes a comprehensive approach, establishing experimentally the characteristics of two new types of photopolymerizable resins (both undoped and doped with micro-ceramic powders), remarking their great accuracy for 3D modeling in die-casting techniques, especially in the production process of customized stents.

A series of analyses were conducted, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, mapping and roughness tests. Additionally, the structural integrity and molecular bonding of these resins were assessed by Fourier-transform infrared spectroscopy–attenuated total reflectance analysis. The research also explored the possibilities of using metallic alloys for producing the stents, comparing the direct manufacturing methods of stents’ struts by SLM technology using Ti6Al4V with stent models made from photopolymerizable resins using SLA. Furthermore, computer-aided engineering (CAE) simulations for two different stent struts were carried out, providing insights into the potential of using these materials and methods for realizing the production of stents.

This study covers advancements in materials and additive manufacturing methods but also approaches the use of CAE analysis, introducing in this way novel elements to the domain of customized stent manufacturing. The emerging applications of these resins, along with metallic alloys and 3D printing technologies, have brought significant contributions to the biomedical domain, as emphasized in this study. This study concludes by highlighting the current challenges and future research directions in the use of photopolymerizable resins and biocompatible metallic alloys, while also emphasizing the integration of artificial intelligence in the design process of customized stents by taking into consideration the 3D printing technologies that are used for producing these stents.

This study aims to analyze the two-dimensional ferrofluid flow in porous media. The effects of changes in parameters such as permeability parameter, buoyancy parameter, Reynolds and Prandtl numbers, radiation parameter, velocity slip parameter, energy dissipation parameter and viscosity parameter on the velocity and temperature profile are displayed numerically and graphically.

By using simplification, nonlinear differential equations are converted into ordinary nonlinear equations. Modeling is done in the Cartesian coordinate system. The finite element method (FEM) and the Akbari-Ganji method (AGM) are used to solve the present problem. The finite element model determines each parameter’s effect on the fluid’s velocity and temperature.

The results show that if the viscosity parameter increases, the temperature of the fluid increases, but the velocity of the fluid decreases. As can be seen in the figures, by increasing the permeability parameter, a reduction in velocity and an enhancement in fluid temperature are observed. When the Reynolds number increases, an increase in fluid velocity and temperature is observed. If the speed slip parameter increases, the speed decreases, and as the energy dissipation parameter increases, the temperature also increases.

When considering factors like thermal conductivity and variable viscosity in this context, they can significantly impact velocity slippage conditions. The primary objective of the present study is to assess the influence of thermal conductivity parameters and variable viscosity within a porous medium on ferrofluid behavior. This particular flow configuration is chosen due to the essential role of ferrofluids and their extensive use in engineering, industry and medicine.