Search results

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

Liquid crystal display (LCD)-based stereolithography (SLA) technique has been used in drug delivery and fabrication of microfluidic devices and piezoelectric materials. It is an additive manufacturing technique where an LCD source has been used as a mask to project the image onto the tank filled with photo curable resin. This resin, when interacted with light, becomes solid. However, critical information regarding the energy absorption during the compression analysis of different components three-dimensional (3D) printed by SLA process is still limited. Therefore, this study aims to investigate the effect of different process parameters on the compressive properties.

In the present study, the influence of layer thickness, infill density and build orientation on the compression properties is investigated. Four infill densities, that is, 20%, 40%, 60% and 80%; five-layer thicknesses, that is, 50 µm, 75 µm, 100 µm, 150 µm and 200 µm; and two different orientations, that is, YXZ and ZXY, have been selected for this study.

It is observed that the samples printed with acrylonitrile butadiene styrene (ABS) absorbed higher energy than the flexible polyurethane (FPU). Higher infill density and sample oriented on ZXY absorbed higher energy than sample printed on YXZ orientation, in both the ABS and FPU materials. Parts printed with 80% infill density and 200 µm layer thickness resulted into maximum energy for both the materials.

In this study, two different types of materials are used for the compression analysis using LCD-SLA-based 3D printer. Specific energy absorbed by the samples during compression testing is measured to compare the influence of parameters. The investigation of infill parameters particularly the infill density is very limited for the SLA-based 3D printing process. Also, the results of this study provide a database to select the print parameters to obtain the required properties. The results also compare the specific energy for hard and flexible material for the same combination of the process parameters.

The purpose of this study is twofold: firstly, to investigate the effect of the infill value and build orientation on the fatigue behaviour of polylactic acid (PLA) specimens made by fused filament fabrication (FFF), also known as fused deposition modelling; and secondly, to model the fatigue behaviour of PLA specimens made by FFF and similar additive manufactured parts.

A new methodology based on filament characterisation, infill measuring, axial fatigue testing and fatigue strength normalisation is proposed and implemented. Sixty fatigue FFF specimens made of PLA were fabricated and evaluated using variable infill percentage and build orientation. On the other hand, fatigue modelling is based on the normalised stress amplitude and the fatigue life in terms of number of cycles. In addition, a probabilistic model was developed to predict the fatigue strength and life of FFF components.

The infill percentage and build orientation have a great influence on the fatigue behaviour of FFF components. The larger the infill percentage, the greater the fatigue strength and life. Regarding the build orientation, the specimens in the up-right orientation showed a much smaller fatigue strength and life than the specimens in the flat and on-edge orientations. Regarding the fatigue behaviour modelling, the proposed Weibull model can predict with an acceptable reliability the stress-life performance of PLA-FFF components.

This study has been limited to axial fatigue loading conditions along three different build orientations and only one type of material.

The results of this study are valuable to predict the fatigue behaviour of FFF parts that will work under variable loading conditions. The proposed model can help designers and manufacturer to reduce the need of experimental tests when designing and fabricating FFF components for fatigue conditions.

A fatigue study based on a novel experimental methodology that considers the variation of the FFF process parameters, the measurement of the real infill value and the normalisation of the results to be comparable with other studies is proposed. Furthermore, a new fatigue model able to predict the stress-life fatigue behaviour of PLA-FFF components considering variable process parameters is also proposed.

This paper aims to investigate the effects of build parameters and strain rate on the mechanical properties of three-dimensional (3D) printed polylactic acid (PLA) by integrating digital image correlation and desirability function analysis. The build parameters included in this paper are the infill density, build orientation and layer height. These findings provide a framework for systematic mechanical characterization of 3D-printed PLA and potential ways of choosing process parameters to maximize performance for a given design.

The Taguchi method was used to shortlist a set of 18 different combinations of build parameters and testing conditions. Accordingly, 18 specimens were 3D printed using those combinations and put through a series of uniaxial tensions tests with digital image correlation. The mechanical properties deduced for all 18 tests were then used in a desirability function analysis where the mechanical properties were optimized to determine the ideal combination of build parameters and strain rate loading conditions.

By comparing the tensile mechanical experimental properties results between Taguchi's recommended parameters and the optimal parameter found from the response table of means, the composite desirability had increased by 2.08%. The tensile mechanical properties of the PLA specimens gradually decrease with an increase in the layer height, while they increase with increasing the infill densities. On the other hand, the mechanical properties have been affected by the build orientation and the strain rate in similar increasing/decreasing trends. Additionally, the obtained optimized results suggest that changing the infill density has a notable impact on the overall result, with a contribution of 48.61%. DIC patterns on the upright samples revealed bimodal strain patterns rendering them more susceptible to failures because of printing imperfections.

These findings provide a framework for systematic mechanical characterization of 3D-printed PLA and potential ways of choosing process parameters to maximize performance for a given design.

This paper aims to investigate the structural behaviour of polylactic acid (PLA) parts fabricated by fused deposition modelling (FDM) to support the development of analytical and numerical models to predict the structural performance of FDM components and categories of similar additive manufactured parts.

A new methodology based on uniaxial tensile tests of filaments and FDM specimens, infill measurement and normalization of the results is proposed and implemented. A total of 396 specimens made of PLA were evaluated by using variable process parameters.

The infill and the build orientation have a large influence on the elastic modulus and ultimate tensile stress, whereas the layer thickness and the infill pattern have a low influence on these properties. The elongation at break is not influenced by the process parameters except by the build orientation. Furthermore, the infill values measured on the test specimens differ from the nominal values provided by the system.

The analysis of the structural properties of FDM samples is limited to uniaxial loading conditions.

The obtained results are valuable for the structural analysis and numerical simulation of FDM components and for potential studies using machine learning techniques to predict the structural response of FDM parts.

A new experimental methodology that considers the measurement of the real infill percentage and the normalization of the results for inter-comparison with other studies is proposed. Moreover, a new set of experimental results of FDM-PLA parts is presented and extends the existing results in the literature.

Material extrusion additive manufacturing, also known as fused deposition modeling, is a manufacturing technique in which objects are built by depositing molten materials layer-by-layer through a nozzle. The use and application of this technique has risen dramatically over the past decade. This paper aims to first, report on the production and characterization of a shape memory polymer material filament that was manufactured to print shape memory polymer objects using material extrusion additive manufacturing. Additionally, it aims to investigate and outline the effects of major printing parameters, such as print orientation and infill percentage, on the elastic and mechanical properties of printed shape memory polymer samples.

Infill percentage was tested at three levels, 50, 75 and 100 per cent, while print orientation was tested at four different angles with respect to the longitudinal axis of the specimens at 0°, 30°, 60° and 90°. The properties examined were elastic modulus, ultimate tensile strength and maximum strain.

Results showed that print angle and infill percentage do have a significant impact on the manufactured test samples.

Findings can significantly influence the tailored design and manufacturing of smart structures using shape memory polymer and material extrusion additive manufacturing.

This paper aims to evaluate the material properties and dimensional accuracy of a MakerBot Replicator 2 desktop 3D printer.

A design of experiments (DOE) test protocol was applied to determine the effect of the following variables on the material properties of 3D printed part: layer height, per cent infill and print orientation using a MakerBot Replicator 2 printer. Classical laminate plate theory was used to compare results from the DOE experiments with theoretically predicted elastic moduli for the tensile samples. Dimensional accuracy of test samples was also investigated.

DOE results suggest that per cent infill has a significant effect on the longitudinal elastic modulus and ultimate strength of the test specimens, whereas print orientation and layer thickness fail to achieve significance. Dimensional analysis of test specimens shows that the test specimen varied significantly (p < 0.05) from the nominal print dimensions.

Although desktop 3D printers are an attractive manufacturing option to quickly produce functional components, this study suggests that users must be aware of this manufacturing process’ inherent limitations, especially for components requiring high geometric tolerance or specific material properties. Therefore, higher quality 3D printers and more detailed investigation into the MakerBot MakerWare printing settings are recommended if consistent material properties or geometries are required.

Three-dimensional (3D) printing is a rapidly expanding manufacturing method. Initially, 3D printing was used for prototyping, but now this method is being used to create functional final products. In recent years, desktop 3D printers have become commercially available to academics and hobbyists as a means of rapid component manufacturing. Although these desktop printers are able to facilitate reduced manufacturing times, material costs and labor costs, relatively little literature exists to quantify the physical properties of the printed material as well as the dimensional consistency of the printing processes.

The purpose of this research is present an experimental and numerical study of the mechanical properties of the acrylonitrile butadiene styrene (ABS) in the additive manufacturing (AM) by fused filament fabrication (FFF). The characterization and mechanical models obtained are used to predict the elastic behavior of a prosthetic foot and the failure of a prosthetic knee manufactured with FFF.

Tension tests were carried out and the elastic modulus, yield stress and tensile strength were evaluated for different material directions. The material elastic constants were determined and the influence of infill density in the mechanical strength was evaluated. Yield surfaces and failure criteria were generated from the tests. Failures over prosthetic elements in tridimensional stresses were analyzed; the cases were evaluated via finite element method.

The experimental results show that the material is transversely isotropic. The elasticity modulus, yield stress and ultimate tensile strength vary linearly with the infill density. The stresses and the failure criteria were computed and compared with the experimental tests with good agreement.

This research can be applied to predict failures and improve reliability in FFF or fused deposition modeling (FDM) products for applications in high-performance industries such as aerospace, automotive and medical.

This research aims to promote its widespread adoption in the industrial and medical sectors by increasing reliability in products manufactured with AM based on the failure criterion.

Most of the models studied apply to plane stress situations and standardized specimens of printed material. However, the models applied in this study can be used for functional parts and three-dimensional stress, with accuracy in the range of that obtained by other researchers. The researchers also proposed a method for the mechanical study of fragile materials fabricated by processes of FFF and FDM.

This paper aims to present a hierarchical multiscale model to evaluate the effect of fused deposition modeling (FDM) process parameters on mechanical properties. Asymptotic homogenization mathematical theory is developed into two scales (micro and macro scales) to compute the effective elastic and shear modulus of the printed parts. Four parameters, namely, raster orientation, layer height, build orientation and porosity are studied.

The representative volume elements (RVEs) are generated by mimicking the microstructure of the printed parts. The RVEs subjected to periodic boundary conditions were solved using finite element. The experimental characterization according to ASTM D638 was conducted to validate the computational modeling results.

The computational model reports reduction (E1, ∼>38%) and (G12, ∼>50%) when porosity increased. The elastic modulus increases (1.31%–47.68%) increasing the orthotropic behavior in parts. Quasi-solids parts (100% infill) possess 10.71% voids. A reduction of 11.5% and 16.5% in elastic modulus with layer height is reported. In total, 45–450 oriented parts were highly orthotropic, and 0–00 parts were strongest. The order of parameters affecting the mechanical properties is porosity > layer height > raster orientation > build orientation.

This study adds value to the state-of-the-art terms of construction of RVEs using slicing software, discarding the necessity of image processing and study of porosity in FDM parts, reporting that the infill density is not the only measure of porosity in these parts.

The mechanical performances of 3D-printed parts are influenced by the manufacturing variables. Many studies experimentally evaluate the impact of the process parameters on specimens’ static and dynamic behavior with the aim of tailoring the mechanical response of the prints. However, this experimental approach is hampered by the very large number of parameters, 3D printers and materials, the development of computer simulation models being thus required. In the context, this study aims to fill a gap by experimentally investigating the influence of infill related parameters over the vibrations of 3D-printed specimens, as well as to propose and validate a parametric finite element (FE) model for the prediction of eigenfrequencies.

A generally applicable FE model is not yet available for the 3D printing technology based on the material extrusion process due to the large number of parameters settings that determine a large variability of outcomes. Hence, the idea of developing numerical simulation models that address sets of parameters and assess their impact on a certain mechanical property. For the natural frequency, the influence of the infill density and infill line width is studied in this paper. An FE script that automates the generation of the model geometry by using the considered set of parameters is developed and run. The results of the modal analysis are compared to the experimental values for validating the script.

Based on the experimental results, a linear regression between the weight of the part and the first natural frequency is established. The response surfaces indicate that the infill density is the most significant parameter of influence. The weight-frequency function is then used for the prediction of the natural frequency of specimens manufactured with other infill parameters and values, including different infill patterns.

As the malfunctions or mechanical damages can be caused by the resonant vibration of parts during use, this research develops a FE-parameterized model that evaluates and predicts the eigenfrequencies of 2D printed parts to prevent these undesirable events. The targeted functional applications are those in which 3D-printed polymer parts are used, such as drone arms or drone propellers.

This research studies the influence of process parameters on the natural frequency of 3D-printed polylactic acid specimens, a topic scarcely addressed in literature. It also proposes a new approach for the development of parameterized FE models for sets of parameters, instead of a general model, to reduce the time and resources allocated to the experimental tests. Such a model is provided in this paper for evaluating the influence of infill parameters on 3D prints eigenfrequency. The numerical model is validated for other infill settings.