Search results

This paper aims to analyze how nearby property prices are affected by new construction projects in Stockholm. If there is an impact on property prices, the authors endeavor to investigate whether the effects vary among different areas within the municipality, for different groups of inhabitants and for different types of housing (i.e. public versus private housing).

The authors use a difference-in-difference specification in a hedonic model, and the sample consists of more than 90,000 observations over the period 2005-2013.

The results are robust and indicate that house prices in nearby areas increase following the completion of infill development. The results also indicate that infill development has a positive spillover effect on nearby dwelling prices only in areas with lower incomes, more public housing units and more inhabitants born abroad.

It provides an analysis on how nearby property prices are affected by new construction projects by creating a restricted control area, so as to make the treatment group and the control group more homogeneous. Thus, it mitigates any potential problems with spatial dependency, which can cause biased standard errors.

This paper aims to investigate whether developers’ ask lower prices on homes in redevelopment sites than they do on similar units in smaller developments completed over a shorter time span. It also investigates whether developers price units differently at different stages of the redevelopment process. The development of designated redevelopment areas often consists of multiple projects spread across several years, some in parallel, some sequential. New units are put on the market in a piecemeal fashion, and infrastructure, shared green spaces and shared facilities are installed successively.

A hedonic price model is used to analyse sales prices of 7,000 new apartments in Oslo sold between 2011 and 2015, all else being equal. The paper distinguishes between infill as one-stage projects, and multi-staged competitive and multi-staged monopolistic redevelopments.

Dwellings in redevelopment projects sell at a lower price than similar dwellings in infill projects. In competitive redevelopments, those in charge of the last projects put a slightly higher price on apartments. In redevelopments involving only one developer, the last stages ask the lowest prices.

This research expands our understanding of developers’ pricing behaviour. Developers supplying housing for the private market through redevelopments land are willing to take risks particularly in the initial stage.

The findings indicate that credit institutions financing developers’ projects need to take into account the structure of selling prices, including lower prices and higher risk of pursuing redevelopment projects.

Gaining a better understanding of developers’ pricing behaviour deepens our insights into the dynamics of market-led urban brownfield developments; this knowledge may moreover inform policies on sustainable urban growth.

An original investigation of housing transactions in urban brownfield sites in Oslo provides fresh insights into developers’ pricing behaviour.

The purpose of this paper is to introduce and discuss potential applications of emerging Building Information Model (BIM) and related technologies as applied to healthcare facilities. The paper presents example of applications of digital tools enabled by BIM that support more integrated outcomes for complex healthcare projects.

Paper formulation by a transdisciplinary author group with ideas and approaches developed through discussions and writing to explore future research directions. Initial ideas are supplemented by a literature review with examples introduced where relevant.

BIM as a front-end construction engineering tool is quite mature. Application of BIM and related tools to support complex healthcare at the precinct scale, for facilities management (FM), including improved user experience (UX) has been limited but shows great promise to support complex healthcare projects.

The research presented is limited and exploratory as it represents the first step by this group to investigate an integrated approach to digital healthcare design and FM.

The paper introduces the considerable benefits of BIM models, and related tools for FM and/or UX (both staff and patients) to save time, money and improves efficiency and accuracy in healthcare facilities.

The transdisciplinary author group brought broad perspectives to the potential benefits of combining accurate data-rich legacy building models with other digital tools for increased integration and co-ordination at all life stages of a healthcare precinct.

This study aims to examine the impact of housing construction on single-family housing values and the implications for urban development.

To achieve this objective, the author used the difference-in-difference methodology to examine the effect of multifamily and single-family housing construction on surrounding single-family homes in Stockholm, Sweden. The author analysed data from approximately 480 housing construction projects between 2009 and 2014 and 17,000 single-family detached house transactions between 2005 and 2018.

The research found that multifamily construction projects did not affect the value of surrounding single-family homes, while single-family home construction had a negative impact. The author attributes this result to single-family housing projects typically located in areas with initially positive externalities, while multifamily housing projects are often located on the edge of areas with negative externalities before construction.

The research is limited by its focus on a specific geographic area and time frame, and future research could expand the scope to include other cities and regions and different periods. Additionally, further research could examine the impact of housing construction on other economic factors beyond housing values.

The research has practical implications for urban planners and policymakers. They should consider the potential negative impact of new single-family home construction on existing single-family housing areas while balancing the need for new housing in urban areas. By carefully evaluating construction locations, policymakers can create more sustainable, livable and equitable urban environments that benefit all members of society.

This research paper contributes to the field of housing economics by examining the impact of housing construction on single-family housing values in the context of urban development and climate change mitigation. Using a difference-in-difference methodology, the study provides evidence of the price effect of multifamily and single-family housing construction on surrounding single-family homes, which has important policy implications for urban planners and policymakers. By identifying the negative impact of single-family home construction on surrounding areas and highlighting the need for careful evaluation of construction locations, the research provides valuable insights for creating sustainable, livable and equitable urban environments that benefit all members of society.

Most support surfaces in comfort applications and sporting equipment are made from pressure-relieving foam such as viscoelastic polyurethane. However, for some users, foam is not the best material as it acts as a thermal insulator and it may not offer adequate postural support. The additive manufacturing of such surfaces and equipment may alleviate these issues, but material and design investigation is needed to optimize the printing parameters for use in pressure relief applications. This study aims to assess the ability of an additive manufactured flexible polymer to perform similarly to a viscoelastic foam for use in comfort applications.

Three-dimensional (3D) printed samples of thermoplastic polyurethane (TPU) are tested in uniaxial compression with four different infill patterns and varying infill percentage. The behaviours of the samples are compared to a viscoelastic polyurethane foam used in various comfort applications.

Results indicate that TPU experiences an increase in strength with an increasing infill percentage. Findings from the study suggest that infill pattern impacts the compressive response of 3D printed material, with two-dimensional patterns inducing an elasto-plastic buckling of the cell walls in TPU depending on infill percentage. Such buckling may not be a beneficial property for comfort applications. Based on the results, the authors suggest printing from TPU with a low-density 3D infill, such as 5% gyroid.

Several common infill patterns are characterised in compression in this work, suggesting the importance of infill choices when 3D printing end-use products and design for manufacturing.

The purpose of this study is to analyse the trends regarding housing segregation over the past 10–20 years and determine whether housing segregation has a spillover effect on neighbouring housing areas. Namely, the authors set out to determine whether proximity to a specific type of segregated housing market has a negative impact on nearby housing markets while proximity to another type of segregated market has a positive impact.

For the purposes of this paper, the authors must combine information on segregation within a city with information on property values in the city. The authors have, therefore, used data on the income of the population and data on housing values taken from housing transactions. The case study used is the city of Stockholm, the capital of Sweden. The empirical analysis will be the estimation of the traditional hedonic pricing model. It will be estimated for the condominium market.

The results indicate that segregation, when measured as income sorting, has increased over time in some of the housing markets. Its effects on housing values in neighbouring housing areas are significant and statistically significant.

A better understanding of the different potential spillover effects on housing prices in relation to the spatial distribution of various income groups would be beneficial in determining appropriate property assessment levels. In other words, awareness of this spillover effect could improve existing property assessment methods and provide local governments with extra information to make an informed decision on policies and services needed in different neighbourhoods.

On housing prices emanating from proximity to segregated areas with high income differs from segregated areas with low income, policies that address socio-economic costs and benefits, as well as property assessment levels, should reflect this pronounced difference. On the property level, positive spillover on housing prices near high-income segregated areas will cause an increase in the number of higher income groups and exacerbate segregation based on income. Contrarily, negative spillover on housing prices near low-income areas might discourage high-income households from moving to a location near low-income segregated areas. Local government should be aware of these spillover effects on housing prices to ensure that policies intended to reduce socioeconomic segregation, such as residential and income segregation, produce desirable results.

Furthermore, a good estimation of these spillover effects on housing prices would allow local governments to carry out a cost–benefit analysis for policies intended to combat segregation and invest in deprived communities.

The main contribution of this paper is to go beyond the traditional studies of segregation that mainly emphasise residential segregation based on income levels, i.e. low-income or high-income households. The authors have analysed the spillover effect of proximity to hot spots (high income) and cold spots (low income) on the housing values of nearby condominiums or single-family homes within segregated areas in Stockholm Municipality in 2013.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

The purpose of this study is to cover the influence of selected printing parameters at a macro and micro-geometrical level, focusing on the dimensions, geometry and surface of printed parts with short carbon fibers reinforced PLA. For this case study, a hollow cylindrical shape is considered, aiming to cover the gap detected in previous works analyzed.

Nowadays, additive manufacturing plays a very important role in the manufacturing industry, as can be seen through its numerous research and applications that can be found. Within the engineering industry, geometrical tolerances are essential for the functionality of the parts and their assembly, but the variability in three-dimensional (3D) printing makes dimensional control a difficult task. Constant development in 3D printing allows, more and more, printed parts with controlled and narrowed geometrical deviations and tolerances. So, it is essential to continue narrowing the studies to achieve the optimal printed parts, optimizing the manufacturing process as well.

Results present the relation between the selected printing parameters and the resulting printed part, showing the main deviations and the eligible values to achieve a better tolerance control. Also, from these results obtained, we present a parametric model that relates the geometrical deviations considered in this study with the printing parameters. It can provide an overview of the piece before printing it and so, adjusting the printing parameters and reducing time and number of printings to achieve a good part.

The main contribution is the study of the geometry selected under a 3D printing process, which is important because it considers parts that are created to fit together and need to comply with the required tolerances. Also, we consider that the parametric model can be a suitable approach to selecting the optimal printing parameters before printing.

This paper aims to investigate the quality of printed surfaces and manufacturing tolerances by comparing the cylindrical cavities machined in parts obtained by fused deposition modeling (FDM) with the holes manufactured during the printing process itself. The comparison focuses on the results of roughness and tolerances, intending to obtain practical references when making assemblies.

The experimental approach focuses on the comparison of the results of roughness and tolerances of two manufacturing strategies: geometric volumes with a through-hole and the through-hole machined in volumes that were initially printed without the hole. Throughout the study, both alternates are explained to make appropriate recommendations.

The study shows the best combinations of technological parameters, both machining and three-dimensional printing, which have been decisive for obtaining successful results. These conclusive results allow enunciating recommendations for use in the industrial environment.

This paper fulfills an identified need to study the dimensional accuracy of the geometries obtained by additive manufacturing, as no experimental evidence has been found of studies that directly address the problem of the FDM-printed part with geometric and dimensional tolerances and desirable surface quality for assembly.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.