Search results

This paper aims to describe a novel hybrid inertial measurement unit (IMU) for motion capturing via a new configuration of strategically distributed inertial sensors, and a calibration approach for the accelerometer and gyroscope sensors mounted in a flight vehicle motion tracker built on the inertial navigation system.

The hybrid-IMU is designed with five accelerometers and one auxiliary gyroscope instead of the accelerometer and gyroscope triads in the conventional IMU.

Simulation studies for tracking with both attitude angles and translational movement of a flight vehicle are conducted to illustrate the effectiveness of the proposed method.

The cross-quadratic terms of angular velocity are selected to process the direct measurements of angular velocities of body frame and to avoid the integration of angular acceleration vector compared with gyro-free configuration based on only accelerometers. The inertial sensors are selected from the commercial microelectromechanical system devices to realize its low-cost applications.

The selection of a suitable inertial measurement unit (IMU) is a critical step in an inertial navigation system (INS) design. Nevertheless, inertial sensors manufacturers are unwilling to publish their products’ accurate performance parameters along with a price. This paper aims to summarise the current IMU market review and point out parameters important for short-term inertial navigation.

The market review is based on the information published by manufacturers in brochures, datasheets and websites. Some information, including price, was also collected from sensors distributors. The entire collection of data includes data of over 150 sensors from 32 manufacturers and is valid for the first half of the year 2020.

This paper answers the following questions: •Why and where use inertial navigation? •Which parameters should one emphasise during IMU selection?•What is currently available on the IMU market? •Which parameters have a significant influence on price? •What are the advantages of specific sensor technology?

This paper gathers data published by IMU manufacturers, allowing for a quick overview of the current market. Based on real data, different sensor technologies are compared. The performed analysis presents the statistical basis for the IMU selection. By theoretical considerations a significance of sensor parameters is drawn and an approach to an IMU selection based on limited number of parameters is proposed. Although the considerations have been carried out regarding inertial navigation, the results from an extensive analysis of commercially available sensors may also be useful for other applications.

The purpose of this paper is to develop a highly miniaturized wireless inertial sensor system based on a novel 3D packaging technique using a flexible printed circuit (FPC). The device is very suitable for wearable applications in which small size and lightweight are required such as body area network, medical, sports and entertainment applications.

Modern wireless inertial measurement units are typically implemented on a rigid 2D printed circuit board (PCB). The design concept presented here is based around the use of a novel planar, six‐faceted, crucifix or cross‐shaped FPC instead of a rigid PCB. A number of specific functional blocks (such as microelectromechanical systems gyroscope and accelerometer sensors, microcontroller (MCU), radio transceiver, antenna, etc.) are first assigned to each of the six faces which are each 1 cm² in area. The FPC cross is then developed into a 1 cm³, 3D configuration by folding the cross at each of five bend planes. The result is a low‐volume and lightweight, 1 cm³ wireless inertial sensor that can sense and send motion sensed data wirelessly to a base station. The wireless sensor device has been designed for low power operation both at the hardware and software levels. At the base station side, a radio receiver is connected to another MCU unit, which sends received data to a personal computer (PC) and graphical user interface. The industrial, scientific and medical band (2.45 GHz) is used to achieve half duplex communication between the two sides.

A complete wireless sensor system has been realized in a 3D cube form factor using an FPC. The packaging technique employed during the work is shown to be efficient in fabricating the final cubic system and resulted in a significant saving in the final size and weight of the system. A number of design issues are identified regarding the use of FPC for implementing the 3D structure and the chosen solutions are shown to be successful in dealing with these issues.

Currently, a limitation of the system is the need for an external battery to power the sensor system. A second phase of development would be required to investigate the possibility of the integration of a battery and charging system within the cube structure. In addition, the use of flexible substrate imposes a number of restrictions in terms of the ease of manufacturability of the final system due to the requirement of the required folding step.

The small size and weight of the developed system is found to be extremely useful in different deployments. It would be useful to further explore the system performance in different application scenarios such as wearable motion tracking applications. In terms of manufacturability, component placement needs to be carefully considered, ensuring that there is sufficient distance between the components, bend planes and board edges and this leads to a slightly reduced usable area on the printed circuit.

This paper provides a novel and useful method for realizing a wireless inertial sensor system in a 3D package. The value of the chosen approach is that a significant reduction in the required system volume is achieved. In particular, a 78.5 per cent saving in volume is obtained in decreasing the module size from a 25 to a 15 mm³ size.

Continuum manipulators are often used in complex and narrow space in recent years because of their flexibility and safety. Vision is considered to be one of the most direct methods to obtain its spatial shape. However, with the improvement of the cooperation requirements of multiple continuum manipulators and the increase of space limitation, it is impossible to obtain the complete spatial shape information of multiple continuum manipulators only by several cameras.

This paper proposes a fusion method using inertial navigation sensors and cameras to reconstruct the shape of continuum manipulators in the whole workspace. The camera is used to obtain the position information, and the inertial navigation sensor is used to obtain the attitude information. Based on the above two information, the shape of the continuum manipulator is reconstructed by fitting Bézier curve.

The experiment result of single continuum manipulator shows that the cubic Bézier curves is applicable to curve fitting of variable curvature, the maximum fitting error is about 2 mm. Meanwhile, the experiment result shows that this method is not affected by obstacles and can still reconstruct the shape of the continuum manipulators in 3-D space by detecting the position and attitude information of the end.

According to the authors’ knowledge, this is the first study on spatial shape reconstruction of multiple continuum manipulators and the first study to introduce inertial navigation sensors and cameras into the field of shape reconstruction of multiple continuum manipulators in narrow space. This method is suitable for shape reconstruction of manipulator with variable curvature continuum manipulator. When the vision of multiple continuum manipulators is blocked by obstacles, the spatial shape can still be reconstructed only by exposing the end point. The structure is simple, but it has certain accuracy within a certain range.

The purpose of this paper is to achieve reliable estimation of yaw angles by fusing data from low-cost inertial and magnetic sensing.

In this paper, yaw angle is estimated by fusing inertial and magnetic sensing from a digital compass and a gyroscope, respectively. A Kalman filter estimates the error produced by the gyroscope.

Drift effect produced by the gyroscope is significantly reduced and, at the same time, the system has the ability to react quickly to orientation changes. The system combines the best of each sensor, the stability of the magnetic sensor and the fast response of the inertial sensor.

The system does not present a stable behavior in the presence of large vibrations. Considerable calibration efforts are needed.

Today, most of human–robot interaction technologies need to have the ability to estimate orientation, especially yaw angle, from small-sized and low-cost sensors.

Existing methods for inertial and magnetic sensor fusion are combined to achieve reliable estimation of yaw angle. Experimental tests in a human–robot interaction scenario show the performance of the system.

This study aims to design an optimized algorithm for low-cost pedestrian navigation system (PNS) to correct the heading drift and altitude error, thus achieving high-precise pedestrian location in both two-dimensional (2-D) and three-dimensional (3-D) space.

A novel heading correction algorithm based on smoothing filter at the terminal of zero velocity interval (ZVI) is proposed in the paper. This algorithm adopts the magnetic sensor to calculate all the heading angles in the ZVI and then applies a smoothing filter to obtain the optimal heading angle. Furthermore, heading correction is executed at the terminal moment of ZVI. Meanwhile, an altitude correction algorithm based on step height constraint is proposed to suppress the altitude channel divergence of strapdown inertial navigation system by using the step height as the measurement of the Kalman filter.

The verification experiments were carried out in 2-D and 3-D space to evaluate the performance of the proposed pedestrian navigation algorithm. The results show that the heading drift and altitude error were well corrected. Meanwhile, the path calculated by the novel algorithm has a higher match degree with the reference trajectory, and the positioning errors of the 2-D and 3-D trajectories are both less than 0.5 per cent.

Besides zero velocity update, another two problems, namely, heading drift and altitude error in the PNS, are solved, which ensures the high positioning precision of pedestrian in indoor and outdoor environments.

The purpose of this paper is to present a novel data glove which can capture the motion of the arm and hand by inertial and magnetic sensors. The proposed data glove is used to provide the information of the gestures and teleoperate the robotic arm-hand.

The data glove comprises 18 low-cost inertial and magnetic measurement units (IMMUs) which not only make up the drawbacks of traditional data glove that only captures the incomplete gesture information but also provide a novel scheme of the robotic arm-hand teleoperation. The IMMUs are compact and small enough to wear on the upper arm, forearm, palm and fingers. The calibration method is proposed to improve the accuracy of measurements of units, and the orientations of each IMMU are estimated by a two-step optimal filter. The kinematic models of the arm, hand and fingers are integrated into the entire system to capture the motion gesture. A positon algorithm is also deduced to compute the positions of fingertips. With the proposed data glove, the robotic arm-hand can be teleoperated by the human arm, palm and fingers, thus establishing a novel robotic arm-hand teleoperation scheme.

Experimental results show that the proposed data glove can accurately and fully capture the fine gesture. Using the proposed data glove as the multiple input device has also proved to be a suitable teleoperating robotic arm-hand system.

Integrated with 18 low-cost and miniature IMMUs, the proposed data glove can give more information of the gesture than existing devices. Meanwhile, the proposed algorithms for motion capture determine the superior results. Furthermore, the accurately captured gestures can efficiently facilitate a novel teleoperation scheme to teleoperate the robotic arm-hand.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

The aim of this article is to present a PIN (pedestrian inertial navigation) solution that incorporates altitude error correction, which eliminates the altitude error accurately without using external sensors. The main problem of PIN is the accumulation of positioning errors due to the drift caused by the noise in the sensors. Experiment results show that the altitude errors are significant when navigating in multilayer buildings, which always lead to localization to incorrect floors.

The PIN proposed is implemented over an inertial navigation systems (INS) framework and a foot-mounted IMU. The altitude error correction idea is identifying the most probable floor of each horizontal walking motion. To recognize gait types, the walking motion is described with angular rate measured by IMU, and the dynamic time warping algorithm is used to cope with the different dimension samples due to the randomness of walking motion. After gait recognition, the altitude estimated with INS of each horizontal walking is checked for association with one of the existing in a database.

Experiment results show that high accuracy altitude is achieved with altitude errors below 5 centimeters for upstairs and downstairs routes in a five floors building.

The main limitations of the study is the assumption that accuracy floor altitude information is available.

Our PIN system eliminates altitude errors accurately and intelligently, which benefits from the new idea of combination of gait recognition and map-matching. In addition, only one IMU is used which is different from other approach that use external sensors.

Due to the complex mechanism during walking, human gait takes plenty of information reflecting human motion. The method of quantitative measurement of gait makes a profound influence in many fields, such as clinical medicine, biped robot control strategy and so on. The purpose of this paper is to present a gait analysis system based on inertial measurement unit (IMU) and combined with body sensor network (BSN).

The authors placed two wireless inertial nodes on the left and right ankles, so that the acceleration and angular velocity could be obtained from both sides at the same time. By using the kinematical model of the human gait, many methods such as time series analysis, pattern recognition and numerical analysis, are introduced to fuse the inertial data and estimate the sagittal gait parameters.

The gait parameters evaluation gains a practical precision, especially in the gait phase detection and the process of how the two feet cooperate with each other has been analyzed to learn about the mechanism of biped walking.

The gait analysis procedure is off line, so that the system ensures sampling at a high rate.

This gait analysis system can be utilized to measure quantitative gait parameters. Further, the coordination of dual gait pattern is presented. Last but not least, the system can also be put into capturing and analyzing the motion of other parts of the body.