Search results

Variation, replication and selection processes are acknowledged as key constructs in studies on how industries evolve, but no theoretical and empirical contributions have applied these key constructs to analyzing industries in specific stages of their history. This paper aims to fill this gap, taking for reference the firm and its strategic action in particular.

After delineating and discussing the three processes of interest – variation, replication and selection – this paper analyzes three very different evolutionary contexts: “red” industries, that reached maturity maintaining a polypolistic structure, and that continue to evolve in this phase; the oligopolistic transformation undergone by certain industries; and the emergence of new market spaces around new products developed by firms.

Variations are mainly reactions to the competitive environment in the evolution of red industries or environment-modifying in the case of industries evolving toward an oligopoly, and in the creation of new market spaces. Horizontal replication through employee mobility prevails in red industries, while in the other two contexts firms driving the evolution raise barriers to replication, inhibiting both horizontal and vertical replication. While selection does not come about in a new market space as long as the barriers erected by the first comer remain in place, it occurs in the form of subset selection in the other two settings.

This paper takes an entirely novel approach and proposes a pluralist framing of how industries evolve, interpreting the different evolutionary situations on the strength of the key variables of variation, replication and selection.

While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while recycling textile fibre. More knowledge is needed for colour management in a circular economy approach.

The research included the use of different dye types in a cotton dyeing process, the process for decolourizing and the results. Two reactive dyes, two direct dyes and one vat dye were used in the study. Four chemical treatment sequences were used to evaluate colour removal from the dyed cotton fabrics, namely, HCE-A, HCE-P-A, HCE-Z-P-A and HCE-Y-A.

The objective was to evaluate how different chemical refining sequences remove colour from direct, reactive and vat dyed cotton fabrics, and how they influence the specific cellulose properties. Dyeing methods and the used refining sequences influence the degree of colour removal. The highest achieved final brightness of refined cotton materials were between 71 and 91 per cent ISO brightness, depending on the dyeing method used.

Only cotton fibre and three different colour types were tested.

With cotton waste, it appears to be easier to remove the colour than to retain it, especially if the textile contains polyester residues, which are desired to be removed in the textile refining stage.

Colour management in the CE context is an important new track to study in the context of the increasing amount of textile waste used as a raw material.

This paper explores how exaptive innovation process might be considered a useful innovation model in constraint-based environments. Through an in-depth case study, it illustrates clearly the antecedents of exaptation processes, which are particularly relevant in rapidly changing environments requiring new solutions under time and resource constraints.

The authors adopt a single case study approach that is particularly suitable in case of an inductive research design, which is required because of the novelty of the topic. The research is inspired by the use of the snorkeling mask EASYBREATH, commercialized by the giant Decathlon, as a medical device, a respirator to treat patients affected by coronavirus in Italy. The authors organized the evidence according to a novel taxonomy grounded in the literature.

The case study stimulates reflections on the existence of some antecedents to the exaptive innovation process in constraint-based environments: (1) the availability of specific actors in the innovation process; (2) the creation of platforms of interaction between people with different competences, nurtured by collective bottom-up financing systems; (3) the role of the community of makers, in particular, and of the 4th industrial revolution, in general, for creating enabling technologies; (4) multidisciplinary individual background of key actors in the innovation process is crucial to ensure the exaptive path to be in place.

This work has some limitations, due to the choice of limiting the analysis to a single case, nevertheless, it offers a first glance on a new technological trajectory available in constraint-based environments.

The case study results underline the importance of new digital collaboration platforms as knowledge multipliers, and illuminate on the potential of the fourth manufacturing revolution, which, through new technologies, creates opportunities for distributed forms of innovation that cross long distances.

The paper is practitioner-focused with a manager-as-coach applying experiential learning to aid an employee's learning and improve performance as well as helping to build employee commitment to both the job and organization. Reciprocity is intended as the learning and commitment of both the employee and manager are enhanced.

As a conceptual, not empirical, paper, the present study aimed at guiding manager behavior the methodology aims to examine the areas of manager-as-coach, efficacy of coaching, theoretical grounding of employee commitment and experiential learning processes. Study and coordination of information in these areas provided support for a detailed action plan for practical application.

It is possible to create a research results–driven practical guide/action plan for managers. The guide incorporates manager skills and commitment theory (investment) along with an experiential learning approach aimed at improving employee growth and building commitment.

There is clear evidence in empirical research that employee commitment positively relates to work performance, job engagement and job retention. This paper applies investment theory to build commitment as it is based on actual inputs and efforts of the employee.

There is very little research currently available that directly addresses manager-as-coach deliberately working to increase or build employee commitment to job, organization or the manager her/himself. This essay aims directly at how commitment may be enhanced.

Mitigating the energy trilemma (ET) is of great importance for dealing with climate change and realizing carbon neutrality. To this end, effectively assessing the level of the ET is essential. The purpose of this study is to evaluate the current situation and the spatio-temporal changes of the ET in the whole of China.

Moreover, based on provincial-level data in China for the period 2002–2017, and by using the dynamic estimation model, we aim to determine the specific marginal impacts of smart transportation (ST) on the ET, and the possible channels through which ST works on the ET.

We thus present the following findings: (1) The performance of both ET and its three pillars is gradually improving in China. Moreover, the situation tends to vary dramatically among various regions and provinces, and the gap between the best performers and the worst is large. (2) ST plays a significant role in inhibiting the ET, a finding that remains robust after a series of tests. And (3) the ET eradication effect of ST is caused mainly by improved innovation, advanced technical efficiency, and the increasing energy scale.

Accordingly, we put forward some policy recommendations to help tackle ET and accelerate ST in China.

White maize-based porridge is a staple food for about 80 per cent consumers in South Africa and in other sub-Saharan African countries contributing significantly to the diet of rural population in developing countries. White maize is deficient in some amino acids and over-dependency on its porridge may lead to high prevalence of malnutrition-related health conditions. Moringa oleifera (MO) and termite (Macrotermes falciger) are known to contain substantial amount of protein. The purpose of this study was to determine the effect of powders from MO leaves and termite on the nutritional and sensory properties of instant maize porridge.

Inclusion of MO and termite powder in instant maize porridge, using different treatments were considered using a completely randomised design. Factor levels were control (maize flour) cooked, blanched and uncooked MO samples. Data were analysed using SPSS version 23.

Protein content of fortified instant maize porridge (FMP) significantly increased from 10.0 to 21.2 per cent compared to unfortified porridge, and this could be attributed to the substitution effect, as fresh uncooked MO leaves are reported to be high in protein. Mineral content of FMP was higher in zinc, iron, calcium and magnesium. Calcium values of FMP were higher (276.8 mg/100 g) compared to unfortified porridge (7.1 mg/100 g). Upon the addition of MO leaves and termite powder, the zinc content increased from 3.4 mg/100to 7.6 mg/100 g. Higher iron values (27.9-36.9 mg/100 g) were observed among fortified samples. The sensory result showed that control sample had higher acceptance than the fortified samples (p = 0.02). Sensory analysis showed that among fortified porridges, blanched sample was rated high for colour and texture, cooked sample was higher in taste and uncooked sample was higher for aroma. Control sample had higher acceptance than fortified porridges for taste. The results of this study showed that the addition of MO leaves and termite powder to instant maize porridge has led to a substantial increase in the nutritional value of FMP.

This study was carried out to develop instant maize porridge fortified with MO leaves and termite powder suitable for infants, pregnant mothers and other maize consumers. The author aimed at improving the nutritional content of instant maize porridge by combining it with MO leaves and termite powders. The results showed that the addition of MO leaves and termite powders to instant maize porridge has led to a substantial increase in the nutritional value of FMP. Therefore, powder from MO leaves and termites could be used in complementary foods to increase protein and mineral contents.

During the last 20 years trade between Korea and Mexico has increased steadily, reaching $2.8 billion in 2003. This trade expansion will be further accelerated with the increase in intra-industry trade in the future. Mexico's chronic trade deficit against Korea, which is attributed to Korea's increasing investment in Mexico, has rather contributed to Mexico's exports to the American region.

As Mexico expands its FTA networks, Korean companies are having difficulties in accessing the Mexican market. Considering this situation and the economic benefits of a Korea-Mexico FTA for both countries, we should first expand cooperation between private sectors, which is expected to facilitate a formal discussion on the Korea-Mexico FTA.

This study aims to provide a comprehensive overview of the current state of the art in powder bed fusion (PBF) techniques for additive manufacturing of multiple materials. It reviews the emerging technologies in PBF multimaterial printing and summarizes the latest simulation approaches for modeling them. The topic of “multimaterial PBF techniques” is still very new, undeveloped, and of interest to academia and industry on many levels.

This is a review paper. The study approach was to carefully search for and investigate notable works and peer-reviewed publications concerning multimaterial three-dimensional printing using PBF techniques. The current methodologies, as well as their advantages and disadvantages, are cross-compared through a systematic review.

The results show that the development of multimaterial PBF techniques is still in its infancy as many fundamental “research” questions have yet to be addressed before production. Experimentation has many limitations and is costly; therefore, modeling and simulation can be very helpful and is, of course, possible; however, it is heavily dependent on the material data and computational power, so it needs further development in future studies.

This work investigates the multimaterial PBF techniques and discusses the novel printing methods with practical examples. Our literature survey revealed that the number of accounts on the predictive modeling of stresses and optimizing laser scan strategies in multimaterial PBF is low with a (very) limited range of applications. To facilitate future developments in this direction, the key information of the simulation efforts and the state-of-the-art computational models of multimaterial PBF are provided.

The purpose of this study is to demonstrate the potential of three-dimensional printing technology for the remanufacturing of end-of-life (EoL) composites. This technology will enable the rapid fabrication of environmentally sustainable structures with complex shapes and good mechanical properties. These three-dimensional printed objects will have several application fields, such as street furniture and urban renewal, thus promoting a circular economy model.

For this purpose, a low-cost liquid deposition modeling technology was used to extrude photo-curable and thermally curable composite inks, composed of an acrylate-based resin loaded with different amounts of mechanically recycled glass fiber reinforced composites (GFRCs). Rheological properties of the extruded inks and their printability window and the conversion of cured composites after an ultraviolet light (UV) assisted extrusion were investigated. In addition, tensile properties of composites remanufactured by this UV-assisted technology were studied.

A printability window was found for the three-dimensional printable GFRCs inks. The formulation of the composite printable inks was optimized to obtain high quality printed objects with a high content of recycled GFRCs. Tensile tests also showed promising mechanical properties for printed GFRCs obtained with this approach.

The novelty of this paper consists in the remanufacturing of GFRCs by the three-dimensional printing technology to promote the implementation of a circular economy. This study shows the feasibility of this approach, using mechanically recycled EoL GFRCs, composed of a thermoset polymer matrix, which cannot be melted as in case of thermoplastic-based composites. Objects with complex shapes were three-dimensional printed and presented here as a proof-of-concept.

This research investigates how subsidy programs in Vietnam's residential electricity market affect consumers' well-being.

Two perspectives are employed: cash transfer and quantity-based subsidy. The effectiveness of cash transfer is measured in three ways: benefit incidence, beneficiary incidence and materiality. The quantity-based subsidy is established under the increasing block rate pricing, with the first two block rates being lower than the marginal cost. To improve the quantity-based subsidy, the research examines the consumer surplus under four proposals.

The results show that both types of subsidies are ineffective in supporting the poor.

In order to achieve a more equal distribution among households, the subsidy program should remove all subsidized blocks and reflect the full marginal cost. Changes should be made to the price structure regarding both marginal price and intervals.

To mitigate the impact of the quantity-based subsidy, the government should improve the cash transfer by reducing extortion and improving targeting efficiency, especially for poor households living in rented houses.

This paper is the first to discuss the welfare effect of the electricity subsidy in Vietnam. First, it comprehensively evaluates the cash transfer subsidy in Vietnam. Second, it suggests a modification in the residential electricity tariff.