Search results

1 – 10 of over 30000
Open Access
Article
Publication date: 3 April 2020

Muhammad Jawad Sajid, Qingren Cao, Ming Cao and Shuang Li

Presentation of the different industrial carbon linkages of India. The purpose of this paper is to understand the direct and indirect impact of these industrial linkages.

1301

Abstract

Purpose

Presentation of the different industrial carbon linkages of India. The purpose of this paper is to understand the direct and indirect impact of these industrial linkages.

Design/methodology/approach

This study uses a hypothetical extraction method with its various extensions. Under this method, different carbon linkages of a block are removed from the economy, and the effects of carbon linkages are determined by the difference between the original and the post-removal values. Energy and non-energy carbon linkages are also estimated.

Findings

“Electricity, gas and water supply (EGW)” at 655.61 Mt and 648.74 Mt had the highest total and forward linkages. “manufacturing and recycling” at 231.48 Mt had the highest backward linkage. High carbon-intensive blocks of “EGW” plus “mining and quarrying” were net emitters, while others were net absorbers. “Fuel and chemicals” at 0.08 Mt had almost neutral status. Hard coal was the main source of direct and indirect emissions.

Practical implications

Net emitting and key net forward blocks should reduce direct emission intensities. India should use its huge geographical potential for industrial accessibility to cheaper alternative energy. This alongside with technology/process improvements catalyzed by policy tools can help in mitigation efforts. Next, key net-backward blocks such as construction through intermediate purchases significantly stimulate emissions from other blocks. Tailored mitigation policies are needed in this regard.

Originality/value

By developing an understanding of India’s industrial carbon links, this study can guide policymakers. In addition, the paper lays out the framework for estimating energy and non-energy-based industrial carbon links.

Details

International Journal of Climate Change Strategies and Management, vol. 12 no. 3
Type: Research Article
ISSN: 1756-8692

Keywords

Article
Publication date: 13 July 2015

Aznur Hajar Abdullah, Shaista Wasiuzzaman and Rosidah Musa

The purpose of this paper is to measure the influence of six university qualities, namely academic quality, academic staff quality, management quality, industrial linkage quality…

1597

Abstract

Purpose

The purpose of this paper is to measure the influence of six university qualities, namely academic quality, academic staff quality, management quality, industrial linkage quality and facilities’ quality, on students’ total experience (STE) and emotional attachment.

Design/methodology/approach

Judgmental sampling is used to collect data from a sample of 489 undergraduate students of a private higher academic institution. The data are then analyzed using structural equation modeling.

Findings

This study finds that only management quality forms a significant direct relationship with emotional attachment, whereas facility quality and industrial linkage form a significant relationship with emotional attachment only when mediated with STE.

Originality/value

The results provide important findings to researchers and management of higher education institutions for future research directions.

Details

International Journal of Social Economics, vol. 42 no. 7
Type: Research Article
ISSN: 0306-8293

Keywords

Article
Publication date: 19 December 2022

Lamei He, Jianping Zha, Jianying Tang, Ting Tan and Qiao Yu

Tourism is a labor-intensive sector with extensive links to other industries and plays a vital role in creating employment. This study aims to propose a new framework to analyze…

Abstract

Purpose

Tourism is a labor-intensive sector with extensive links to other industries and plays a vital role in creating employment. This study aims to propose a new framework to analyze the intrinsic structure of the employment effects of tourism-related sectors and their drivers.

Design/methodology/approach

This study uses input–output and structural decomposition analysis (IO-SDA) to quantify the employment effects of tourism-related sectors and their driving mechanisms based on China’s I-O tables of 2002, 2007, 2012 and 2017.

Findings

The results show a declining trend in the intensity of direct or indirect employment effects in tourism-related sectors, indicating a decreasing number of jobs directly or indirectly required to create a unit of tourism output. Among tourism-related sectors, catering has the highest intensity of indirect employment effects over the study period. Catering stimulates the indirect employment of agriculture, forestry, animal husbandry, fishery and food and tobacco manufacturing. The decomposition analysis reveals that final demand is the largest contributor to the increase in tourism employment, while technological progress shifts from an employment-creation effect in 2002–2012 to an employment-destruction effect in 2012–2017.

Originality/value

This study proposes a new analytical framework to investigate the structural proportional relationship between the direct and indirect employment effects of various tourism-related sectors and their dynamic changes. Doing so, it provides valuable references for policymakers to promote tourism employment.

旅游相关部门就业效应的驱动因素:以中国为例

摘要

研究目的

旅游业是一个劳动密集型部门, 与其他国民经济部门有着广泛的联系, 这在创造就业方面发挥着重要作用。本研究旨在建立一个框架, 分析旅游相关部门就业效应的内在结构及其驱动因素。

研究设计

本研究基于中国2002年、2007年、2012年和2017年的投入产出表, 引入投入产出和结构分解分析(IO-SDA)法量化了旅游相关行业的就业效应及其变化的驱动机制。

研究结果

旅游相关部门的直接或间接就业强度呈下降趋势, 可见创造一个单位的旅游产出所需的直接或间接工作数量在减少。在旅游相关部门中, 餐饮部门在研究期内的间接就业效应强度最高, 主要带动了农、林、牧、渔业和食品及烟草制造业的间接就业。旅游就业效应变动的驱动因素中, 最终需求是旅游就业效应增加的最大贡献者, 技术效应从2002-2012年期间的就业创造效应转变为2012-2017年期间的就业破坏效应。

研究原创性

本研究建立了一个全新的分析框架, 可以揭示各个旅游相关部门的直接和间接就业效应之间的结构比例关系及其动态变化。对旅游就业效应的驱动因素分析可以为政策制定者提供针对性的建议, 以促进旅游就业。

Factores que impulsan los efectos del empleo en los sectores relacionados con el turismo: El caso de China continental

Resumen

Propósito

El turismo es un sector intensivo en mano de obra con amplios vínculos con otras industrias y desempeña un papel vital en la creación de empleo. Este estudio propone un nuevo marco para analizar la estructura intrínseca de los efectos en el empleo de los sectores relacionados con el turismo y sus impulsores.

Diseño/metodología/enfoque

Este estudio utiliza el análisis de entrada-salida (input-output) y de descomposición estructural (structural decomposition) (IO-SDA) para cuantificar los efectos sobre el empleo en los sectores relacionados con el turismo y sus mecanismos impulsores, basándose en las tablas input-output de China de 2002, 2007, 2012 y 2017.

Conclusiones

Los resultados muestran una tendencia a la baja en la intensidad de los efectos directos o indirectos del empleo en los sectores relacionados con el turismo, lo que indica un número cada vez menor de puestos de trabajo directos o indirectos necesarios para crear una unidad de producción turística. Entre los sectores relacionados con el turismo, la restauración tiene la mayor intensidad de efectos indirectos sobre el empleo durante el periodo de estudio. La restauración estimula el empleo indirecto de la agricultura, la silvicultura, la ganadería, la pesca y la fabricación de alimentos y tabaco. El análisis de descomposición revela que la demanda final es la que más contribuye al aumento del empleo turístico, mientras que el progreso tecnológico pasa de ser un efecto de creación de empleo en 2002-2012 a un efecto de destrucción de empleo en 2012-2017.

Originalidad/valor

Este estudio propone un nuevo marco analítico para investigar la relación estructural proporcional entre los efectos directos e indirectos del empleo de varios sectores relacionados con el turismo y sus cambios dinámicos. De este modo, proporciona valiosas referencias para que los responsables políticos promuevan el empleo en el sector turístico.

Book part
Publication date: 30 November 2022

Annalisa Caloffi and Mauricio Serra

François Perroux was an economist of strong convictions and fruitful ideas. His belief, which was also shared by other eminent development economists of his time, that…

Abstract

François Perroux was an economist of strong convictions and fruitful ideas. His belief, which was also shared by other eminent development economists of his time, that backwardness was not a fate is entirely reflected in his development pole theory, which has a prominent place within the regional development theory. This implies that his theory was highly influential, as evidenced by the fact that strategies based on development poles were implemented around the world, in both developed and developing countries. Although these strategies took different forms, largely depending on the specific contexts in which they were applied, there was a common factor in all of them, which was the importance of the direct use of large-scale investment resources to generate the hoped-for structural changes through accelerated economic growth. Looking carefully at the Italian and Brazilian cases, it should be noted that the development pole strategies had, in addition to the use of heavy investment resources already mentioned, some common characteristics, such as: the focus of attention directed toward the backward regions, specifically the Mezzogiorno region in Italy and the Amazon region in Brazil; the fight against regional disparities within both countries through structural change and the strengthening of backward regional economies as an underlying reason; and the active participation of the State in the drawing up and implementation processes of development poles. This chapter aims at comparing the development pole strategies in Italy and Brazil, highlighting similarities and differences of these experiences in triggering the long-awaited regional development.

Details

Research in the History of Economic Thought and Methodology: Including a Symposium on the Work of François Perroux
Type: Book
ISBN: 978-1-80382-715-5

Keywords

Article
Publication date: 1 May 1991

George P. Artikis

Attempts by Greek governments to attract manufacturing industry toproblem regions have been shaped by a large number of development laws.Location policy works principally by…

Abstract

Attempts by Greek governments to attract manufacturing industry to problem regions have been shaped by a large number of development laws. Location policy works principally by influencing the decisions of individual firms. The article examines the relevance of Greek government location policy and the local criteria actually used by firms operating in the food industry. Raw materials were the most important determinant and the results otherwise suggest that the use of financial factors as an instrument of regional policy needs re‐examination.

Details

International Journal of Operations & Production Management, vol. 11 no. 5
Type: Research Article
ISSN: 0144-3577

Keywords

Article
Publication date: 1 December 2023

Chen Xuemeng and Ma Guangqi

The manufacturing industry and the producer service industry have a high degree of industrial correlation, and their integration will cause changes in the complex industrial

Abstract

Purpose

The manufacturing industry and the producer service industry have a high degree of industrial correlation, and their integration will cause changes in the complex industrial network topology, which is an important reason for the synergistic effect. This paper describes the topology of industrial systems using complex network theory; further, it discusses how to identify the criticality and importance of industrial nodes, and whether node characteristics cause synergistic effects.

Design/methodology/approach

Based on the input-output data of China in 2007, 2012 and 2017, this paper constructs the industrial complex network of 30 Chinese provinces and cities, and measures the regional network characteristics of the manufacturing industry. The fixed-effect panel regression model is adopted to test the influence of agglomeration degree and centrality on synergies, and its adjustment mechanism is explored.

Findings

The degree of network agglomeration in the manufacturing industry exerts a negative impact on the synergistic effect, while the centrality of the network exerts a significant promoting effect on the synergistic effect. The results of adjustment mechanism test show that enhancing the autonomous controllable ability of the regional industrial chain in the manufacturing industry can effectively reduce the effect of network characteristics on the synergistic effect.

Research limitations/implications

Based on input-output technology, this paper constructs a complex industrial network model, however, only basic flow data are used. Considerable in-depth and detailed research on the economic and technological connections within the industry should be conducted in the future. The selection of the evaluation index of the importance of industrial nodes also needs to be further considered. For historical reasons, it is also difficult to obtain and process data when carrying out quantitative analysis; therefore, it is necessary to make further attempts from the data source and the expression form of evaluation indicators.

Practical implications

In a practical sense this has certain reference value for the formulation of manufacturing industrial policies the optimization of regional industrial layout and the improvement of the industrial development level. It is necessary to formulate targeted and specialized industrial development strategies according to the characteristics of the manufacturing industry appropriately regulate the autonomous controllable ability of the industrial chain and avoid to limit the development of industries which is in turn limited by regional resources. Industry competition and market congestion need to be reduced industry exchanges outside the region encouraged the industrial layout optimized and the construction of a modern industrial system accelerated.

Social implications

The above research results hold certain reference importance for policy formulation related to the manufacturing industry, regional industrial layout optimization and industrial development level improvement. Targeted specialized industrial development strategies need to be formulated according to the characteristics of the manufacturing industry; the autonomous controllability of the industrial chain needs to be appropriately regulated; limitation of regional resources needs to be avoided as this restricts industrial development; and industry competition and market congestion need to be reduced. Agglomeration of production factors and optimization of resource allocation is an important part of a beneficial regional economic development strategy, and it is also an inevitable choice for industrialization to develop to a certain stage under the condition of a market economy. In alignment with the research conclusions, effective suggestions can be put forward for the current major industrial policies. In the process of promoting the development of the manufacturing industry, it is necessary for regional governments to carry out unified planning and guidance on the spatial layout of each manufacturing subsector. Regional governments need to effectively allocate inter-industry resources, better share economies of scale, constantly enhance the competitive advantages and competitiveness of development zones and new districts and promote the coordinated agglomeration and development of related industries with input industries. Industrial exchanges outside the region should be encouraged, the industrial layout should be optimized and the construction of a modern industrial system should be accelerated.

Originality/value

Complex network theory is introduced to study the industrial synergy effect. A complex industrial network of China's 30 regions is built and key network nodes are measured. Based on the dimensionality of the “industrial node – industrial chain – industrial complex network”, the research path of industrial complex networks is improved.

Details

Kybernetes, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0368-492X

Keywords

Open Access
Article
Publication date: 7 December 2021

Yin Kedong, Zhe Liu, Caixia Zhang, Shan Huang, Junchao Li, Lingyun Lv, Xiaqing Su and Runchuan Zhang

In recent years, China's marine industry has maintained rapid growth in general, and marine-related economic activities have continued to improve. The purpose of this research is…

3082

Abstract

Purpose

In recent years, China's marine industry has maintained rapid growth in general, and marine-related economic activities have continued to improve. The purpose of this research is to analyze the basic situation of China's marine economy development, identify the problems therein, forecast development trends and propose policy recommendations accordingly.

Design/methodology/approach

This research conducts a comprehensive and detailed analysis of the development of China's marine economy with rich data in diversified aspects. The current situation of China's marine economy development is analyzed from the perspective of scale and structure, and the external and internal development environment of China's marine economy is discussed. With the application of measurement and prediction method such as trend extrapolation, exponential smoothing, grey forecasting and neural network method, the future situation of China's marine economy development is forecasted.

Findings

In a complex environment where uncertainties at home and abroad have increased significantly, China's marine economy development suffers tremendous downward pressure in recent years. As China has achieved major achievements in the prevention and control of the COVID-19 epidemic, the marine economy development will gradually return to normal. It is estimated that the gross marine production value in 2022 will exceed 10 trillion yuan. China's marine economy will continue to maintain a steady growth trend in the future, and its development prospects will remain promising.

Originality/value

This research explores the current situation and trends of China's marine economy development and puts forward policy recommendations to promote the steady and health development of China's marine economy accordingly.

Details

Marine Economics and Management, vol. 5 no. 1
Type: Research Article
ISSN: 2516-158X

Keywords

Article
Publication date: 14 June 2018

Yongqi Feng and Tianshu Zhang

The purpose of this paper is to provide a better understanding of the driving forces and structural changes of China as a market provider for Korea. This paper gives the answers…

Abstract

Purpose

The purpose of this paper is to provide a better understanding of the driving forces and structural changes of China as a market provider for Korea. This paper gives the answers for the following questions: How do China’s final demands trigger the growth of its imports from Korea? And what’s the impact of China’s final demands on the import in different industries?

Design/methodology/approach

Based on the Multi-Regional Input-Output model and World Input-Output Table database, this paper constructs the non-competitive imports input-output (IO) table of China to Korea. According to this table, we can calculate the induced imports coefficient and comprehensive induced import coefficients of China’s four final demands for imports from Korea in the 56 industries in China.

Findings

Among the four driving forces, the strongest one is changes in inventories and valuables. The impact of final consumption expenditure and fixed capital formation is much lower than that of changes in inventories and valuables, but they have a broader impact for the 56 industries. This paper finds out the China’s import induction of the final demands to Korea peaked in 2005 and 2010 and decreased greatly in 2014, so the position of China as market provider for Korea will no longer rise substantially, contrarily it will be in a steady state.

Originality/value

First, this paper constructs the non-competitive IO table to analyze the market provider issues between two countries and provides practical ways and methods for studies on the issues of imports and market provider. Second, this paper investigates the different roles of four final demands on driving force of China as market provider for Korea and the structural changes of China as a market provider for Korea among 56 industries from 2000 to 2014.

Details

Journal of Korea Trade, vol. 22 no. 3
Type: Research Article
ISSN: 1229-828X

Keywords

Article
Publication date: 9 May 2018

Leslie Garcia-Montijo and Alonso Perez-Soltero

The purpose of this paper is to analyze the importance of the linkage between academia and industry from a business perspective. The analysis focuses on the impact generated from…

Abstract

Purpose

The purpose of this paper is to analyze the importance of the linkage between academia and industry from a business perspective. The analysis focuses on the impact generated from these collaboration programs to promote innovation. Data for the analysis was obtained through a measurement instrument, which allows evaluating multiple dimensions of capacity of absorption as determinants of the innovation.

Design/methodology/approach

The methodology consisted of the implementation of the measurement instrument for the managers in the companies who were involved in the collaborative projects. From the answers obtained, an analysis of strengths and weaknesses was performed, categorized by absorptive capacity dimensions, satisfaction with linkage relationship and innovative impact. In addition, a comparative exercise is presented with the purpose of learning the position of the Postgraduate Program in Industrial Engineering in México, and finally, an analysis of Spearman’s coefficient was performed to verify whether the linkage influenced innovation for this case study.

Findings

There is a positive correlation between linkage and innovation. An unexpected finding was the level of satisfaction of the companies that collaborated with the academy and the real situation of each dimension to determine the improvements in the policies and mechanisms of linkage.

Research limitations/implications

One of the main challenges of this paper was to identify and contact the managers of the projects. These projects have been performed and completed in several companies from 2011 to date. Over this time, some managers have changed their employment status and even their places of residence. Therefore, establishing contact and performing interviews with the managers directly linked to each project was a complex process.

Originality/value

This is the first paper that demonstrates and measures the relationship between linkage and innovation through an instrument of absorptive capacity, which determines the behavior of each dimension where strengths and weaknesses of collaboration relationships are detected and determines the punctual impact on innovation from the perspective of the businessmen involved.

Details

International Journal of Innovation Science, vol. 10 no. 2
Type: Research Article
ISSN: 1757-2223

Keywords

Article
Publication date: 30 March 2010

Sulaman Hafeez Siddiqui and Hassan Mujtaba Nawaz Saleem

The purpose of this paper is to extend the theory of services‐led industrial policy in services dominated but industrially lagging developing Asian economies and discuss its…

1146

Abstract

Purpose

The purpose of this paper is to extend the theory of services‐led industrial policy in services dominated but industrially lagging developing Asian economies and discuss its implications for employment, competitiveness, and diversification.

Design/methodology/approach

An inductive approach using qualitative methodology is adopted reviewing the available literature and evidence from Pakistan. The critical synthesis of the history of economic growth and industrial policy has followed Kuhn's paradigm approach.

Findings

Focusing on Pakistan, the paper synthesizes the history of industrial policy to identify the major paradigm shifts, especially the structural reforms era of the 1990s. The evidence suggests that the reforms under the structural adjustment program (SAP) have proved to be the necessary but not sufficient conditions for inclusive growth and industrial competitiveness in services dominated economies. Services‐led growth without an integrated and competitive industrial sector can lead to severe external accounts deficits and unemployment. The traditional role of services as “driver of demand/growth” is extended as “driver of productivity/competitiveness” through forward linkages with other sectors of the economy. The services sector's enabling role as the “software” of the economy and its impact on total factor productivity growth, diversification, and inclusive growth is postulated.

Research limitations/implications

A quantification of forward and backward linkages is needed to identify the potential of services sub‐sectors in driving growth and productivity, respectively.

Originality/value

The paper identifies the need to match the existing industrial policy regimes with the economic structures in services‐dominated developing economies. The role of forward linkages in the productivity growth has implications for measurement of services output in national accounts in order to fully capture the contribution of this sector.

Details

Competitiveness Review: An International Business Journal, vol. 20 no. 2
Type: Research Article
ISSN: 1059-5422

Keywords

1 – 10 of over 30000