Search results

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

Stein Rokkan (1921–1979) gave this lecture in Paris, 4th December 1976. Comparative Social Research here publishes the first English language translation of Rokkan's manuscript for the lecture, which was given in French. The lecture was earlier only available in German (published 1980) and Norwegian (published 1921) translations. The lecture presents the sequence of models that Rokkan developed for his Europe-project aiming to explain the variations between 16 Western European democracies with reference to rights, party systems and systems alternatives. It is the only extensive intellectual autobiography that Rokkan ever wrote.

This paper investigates the effect of state-society relations on the industrially-related growth paths of developed countries.

It introduces a novel theoretical framework, the state-business-labor relations (SBLR) framework, where four main actors are identified: the state, big businesspersons or tycoons, owners and managers of small and medium enterprises (SMEs) or Entrepreneurs and labor. Different SBLR categories or modes are introduced depending on levels of coordination and power relations between the studied actors. The paper then investigates how these SBLR modes, through adopting various policies targeting the industrial sector, lead to different growth paths. Rather than focusing only on economic growth, this research regards a growth path as a matrix of the performance in long-run growth and equality of distribution.

Using regression analysis and statistical data, the results suggest that the Co-Balanced mode, having higher levels of coordination and lower favoritism, leads to the best growth path among the four introduced modes, especially with its emphasis on high levels of venture capital availability and easiness of starting business. while the Lib-Capture mode, characterized by lower coordination and higher favoritism, seems to have the worst growth path and the best implemented policy for this mode is suggested to be high profit taxes that seem to counter the negative impact of the existing high levels of favoritism.

Despite the important findings that this research has reached, this paper is mainly meant to open a further investigation into this topic and open this dimension that the research on VoC and political economy have under-researched. A deeper investigation of SBLR typologies that could only be possible by having richer datasets with more data on coordination for the whole world, rather than only the advanced economies, would further our understanding of the dynamics that shape the growth paths of different countries of the world.

To realize the best industrial growth path, fighting favoritism should be an important objective. The negative impact of favoritism on innovation could not be disregarded in the eve of the fourth industrial revolution, where innovation is increasingly pivotal to future industrial development. Actively engaging societal groups in the policymaking process is important in addressing their concerns and balancing them at the same time. This should lead to the double benefit of formulating better policies that should foster growth as well as provide better distribution of this growth. High levels of coordination should help in realizing this objective. Yet, this could only be possible if societal groups are free to associate and aggregate their power and when there are means of preventing one actor from gaining more favorite treatment and exclusive influence over policymakers. The presence of both powerful and broadly represented business associations and labor unions and the existence of a government interested in coordinating their efforts-rather than letting itself be controlled by one group at the expense of the others-should help in the realization of the best growth path. Thus, institutional reform that empowers societal groups and enables them to defend their interests as well as fights all forms of corruption should lead to the realization of a more prosperous and equitable industrial development, with the “re-industrialization” of the developed world being no exception. The technological and social challenges of intensive automation and digitalization accompanying the fourth industrial revolution make the envisaged institutional reform more urgent.

This paper is introducing a novel theoretical framework for studying the effect of state-society relations, particularly SBLR, on the industrial growth paths of developed countries. It integrates three important bodies of literature in order to build a more comprehensive understanding of the dynamics of state-society relations and their economic consequences. These are the Varieties of Capitalism (VoC), State-Business Relations (SBR) and Industrial Relations. The SBLR framework differentiates between tycoons and entrepreneurs, an important distinction that often goes unnoticed. Different SBLR categories or modes are introduced, depending on levels of coordination and power relations between the actors. It is proposed in this research that the effect on growth paths goes beyond the simple dichotomy between CMEs and LMEs usually present in the literature of VoC and that power relations provide an essential complementary dimension in explaining this causality.

Industry 4.0 has an inimitable potential to create competitive advantages for the apparel industry by enhancing productivity, production, profitability, efficiency and effectiveness. This study, thus, aims to assess the digitalisation level of the Tanzanian apparel industry through the Industry 4.0 perspectives.

A mixed-methods-based approach was deployed. This study deployed semi-structured interviews, document review and observation methods for the qualitative approach. For the quantitative approach, closed-ended questionnaires were used to ascertain the digitalisation levels and maturity level of the textiles and apparel (T&A) factories and small and medium-sized textile enterprises in Tanzania. The sample size was 110, with participants engaged through the purposive sampling technique.

Industry 4.0 frameworks evolved into practices mainly since 2011 in several service and manufacturing industries globally. For Tanzania, the findings indicate that the overall maturity level of the T&A industries is 2.5 out of 5.0, demonstrating a medium level of adoption. Thus, the apparel industries are not operating under the industry 4.0 framework; they are operating within the third industrial revolution – Industry 3.0 – framework. For such industries to operate within the fourth industrial revolution – Industry 4.0 – that is only possible if there is significantly well-developed industrial infrastructure, availability of engineering talent, stable commercial partnerships, demand from the marketplace and transactional relationship with customers.

This study’s limitations include: firstly, Industry 4.0 is an emerging area; this resulted in limited theoretical underpinnings in the Tanzanian perspectives. Secondly, the studied industries may not suffice the need to generalise the findings for the entire country, thus needing another study.

Although Industry 4.0 conceptual frameworks have been on trial in several industries since 2011, this is amongst the first empirical research on Industry 4.0 in the Tanzanian apparel industry that assesses the digitalisation levels.

This study employs Stein Rokkan's methodological approach to analyse state formation in the Greater Middle East. It develops a conceptual framework distinguishing colonial, populist and democratic pacts, suitable for analysis of state formation and nation-building through to the present period. The framework relies on historical institutionalism. The methodology, however, is Rokkan's. The initial conceptual analysis also specifies differences between European and the Middle Eastern state formation processes. It is followed by a brief and selective discussion of historical preconditions. Next, the method of plotting singular cases into conceptual-typological maps is applied to 20 cases in the Greater Middle East (including Afghanistan, Iran and Turkey). For reasons of space, the empirical analysis is limited to the colonial period (1870s to the end of World War 1). Three typologies are combined into one conceptual-typological map of this period. The vertical left-hand axis provides a composite typology that clarifies cultural-territorial preconditions. The horizontal axis specifies transformations of the region's agrarian class structures since the mid-19th century reforms. The right-hand vertical axis provides a four-layered typology of processes of external intervention. A final section presents selected comparative case reconstructions. To the authors' knowledge, this is the first time such a Rokkan-style conceptual-typological map has been constructed for a non-European region.

Industry 4.0 has put forward a smart perspective on managing supply chain networks and their operations. The current manufacturing system is primarily data-driven. Industries are deploying new emerging technologies in their operations to build a competitive edge in the business environment; however, the true potential of smart manufacturing has not yet been fully unveiled. This research aims to extensively analyse emerging technologies and their interconnection with smart manufacturing in developing smarter supply chains.

This research endeavours to establish a conceptual framework for a smart supply chain. A real case study on a smart factory is conducted to demonstrate the validity of this framework for building smarter supply chains. A comparative analysis is carried out between conventional and smart supply chains to ascertain the advantages of smart supply chains. In addition, a thorough investigation of the several factors needed to transition from smart to smarter supply chains is undertaken.

The integration of smart technology exemplifies the ability to improve the efficiency of supply chain operations. Research findings indicate that transitioning to a smart factory radically enhances productivity, quality assurance, data privacy and labour efficiency. The outcomes of this research will help academic and industrial sectors critically comprehend technological breakthroughs and their applications in smart supply chains.

This study highlights the implications of incorporating smart technologies into supply chain operations, specifically in smart purchasing, smart factory operations, smart warehousing and smart customer performance. A paradigm transition from conventional, smart to smarter supply chains offers a comprehensive perspective on the evolving dynamics in automation, optimisation and manufacturing technology domains, ultimately leading to the emergence of Industry 5.0.

The study aims to explore digital transformation from the viewpoint of human resource management to uncover possible threads of relationship using bibliometric analysis. It also aims to identify the trending research themes within the domains of digital transformation (DT) and human resource management (HRM) collectively.

The research employs a mix of quantitative bibliometric techniques and qualitative content analysis. A corpus of 227 articles retrieved from the Scopus database was analyzed using the R-based Biblioshiny and VOS viewer.

The study shows publication trends, influential authors, leading journals, highly productive institutions, and, countries in the domain of DT and HRM. Co-citation and co-occurrence analysis was undertaken to identify the research clusters, depicting trending research themes that extensively dominate the research under this domain.

This study will serve as a ready reckoner for academicians and business leaders, giving them useful insights to make their road towards digital transformation less challenging with the assistance of human capital.

This study is one of the initial efforts to quantitatively synthesize the results of earlier publications using bibliometric techniques in the domain of DT and HRM together. It will aid researchers in locating research gaps and filling those gaps in the future.

This paper aims to introduce a model using a digital twin concept in a cold heading manufacturing and develop a digital visual management (VM) system using Lean overall equipment effectiveness (OEE) tool to enhance the process performance and establish Fourth Industrial Revolution (I4.0) platform in small and medium enterprises (SMEs).

This work utilised plan, do, check, act Lean methodology to create a digital twin of each machine in a smart manufacturing facility by taking the Lean tool OEE and digitally transforming it in the context of I4.0. To demonstrate the effectiveness of process digitisation, a case study was carried out at a manufacturing department to provide the data to the model and later validate synergy between Lean and I4.0 platform.

The OEE parameter can be increased by 10% using a proposed digital twin model with the introduction of a Level 0 into VM platform to clearly define the purpose of each data point gathered further replicate in projects across the value stream.

The findings suggest that researchers should look beyond conversion of stored data into visualisations and predictive analytics to improve the model connectivity. The development of strong big data analytics capabilities in SMEs can be achieved by shortening the time between data gathering and impact on the model performance.

The novelty of this study is the application of OEE Lean tool in the smart manufacturing sector to allow SME organisations to introduce digitalisation on the back of structured and streamlined principles with well-defined end goals to reach the optimal OEE.

The purpose of this paper is to investigate how different manufacturing technologies are bundled together and how these bundles influence operations performance and, indirectly, business performance. With the emergence of Industry 4.0 (I4.0) technologies, manufacturing companies can use a wide variety of advanced manufacturing technologies (AMT) to build an efficient and effective production system. Nevertheless, the literature offers little guidance on how these technologies, including novel I4.0 technologies, should be combined in practice and how these combinations might have a different impact on performance.

Using a survey study of 165 manufacturing plants from 11 different countries, we use factor analysis to empirically derive three distinct manufacturing technology bundles and structural equation modeling to quantify their relationship with operations and business performance.

Our findings support an evolutionary rather than a revolutionary perspective. I4.0 technologies build on traditional manufacturing technologies and do not constitute a separate direction that would point towards a fundamental digital transformation of companies within our sample. Performance effects are rather weak: out of the three technology bundles identified, only “automation and robotization” have a positive influence on cost efficiency, while “base technologies” and “data-enabled technologies” do not offer a competitive advantage, neither in terms of cost nor in terms of differentiation. Furthermore, while the business performance impact is positive, it is quite weak, suggesting that financial returns on technology investments might require longer time periods.

Relying on a complementarity approach, our research offers a novel perspective on technology implementation in the I4.0 era by investigating novel and traditional manufacturing technologies together.