Search results

This paper aims to develop a numerical study of the steady natural convection in an inclined square porous cavity filled by a nanofluid with sinusoidal temperature distribution on the side walls and adiabatic conditions on the upper and lower walls.

Governing equations transformed in terms of the dimensionless variables using the Darcy–Boussinesq approximation have been solved numerically using a central finite-difference scheme. The Gaus-Siedel iteration technique was used for the system of discretized equations. The two-phase nanofluid model including the Brownian diffusion and thermophoresis effects has been considered for simulation of nanofluid transport inside the cavity.

The numerical results of streamlines, isotherms and isoconcentrations are investigated and the effect of different important parameters, such as inclination angle of the cavity, amplitude ratio of the sinusoidal temperature or phase deviation, is discussed. The results obtained for no inclination of the cavity are compared and successfully validated with previous reported results of the literature. The important findings of the study are focused on the changes made by the inclination angle and the periodic thermal boundary conditions, on the heat and fluid flow.

The originality of the present study is given by the mathematical model presented for an inclined cavity, the numerical solution with new results for inclined cavity and the applications for design of solar energy devices such as solar collectors in which the boundary conditions vary with time because of changes in weather conditions.

This paper aims to examine the thermal transmission and entropy generation of hybrid nanofluid filled containers with solid body inside. The solid body is seen as being both isothermal and capable of producing heat. A time-dependent non-linear partial differential equation is used to represent the transfer of heat through a solid body. The current study’s objective is to investigate the key properties of nanoparticles, external forces and particular attention paid to the impact of hybrid nanoparticles on entropy formation. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates. Hybrid nanofluid has been proven to have useful qualities, making it an attractive coolant for an electrical device. The findings would help scientists and engineers better understand how to analyse convective heat transmission and how to forecast better heat transfer rates in cutting-edge technological systems used in industries such as heat transportation, power generation, chemical production and passive cooling systems for electronic devices.

Thermal transmission and entropy generation of hybrid nanofluid are analysed within the enclosure. The domain of interest is a square chamber of size L, including a square solid block. The solid body is considered to be isothermal and generating heat. The flow driven by temperature gradient in the cavity is two-dimensional. The governing equations, formulated in dimensionless primitive variables with corresponding initial and boundary conditions, are worked out by using the finite volume technique with the SIMPLE algorithm on a uniformly staggered mesh. QUICK and central difference schemes were used to handle convective and diffusive elements. In-house code is developed using FORTRAN programming to visualize the isotherms, streamlines, heatlines and entropy contours, which are handled by Tecplot software. The influence of nanoparticles volume fraction, heat generation factor, external magnetic forces and an irreversibility ratio on energy transport and flow patterns is examined.

The results show that the hybrid nanoparticles concentration augments the thermal transmission and the entropy production increases also while the augmentation of temperature difference results in a diminution of entropy production. Finally, magnetic force has the significant impact on heat transfer, isotherms, streamlines and entropy. It has been observed that the external magnetic force plays a good role in thermal regulations.

Hybrid nanofluid is a desirable coolant for an electrical device. Various nanoparticles and their combinations can be analysed. Ferro-copper hybrid nanofluid considered with the help of prevailing literature review. The research would benefit scientists and engineers by improving their comprehension of how to analyses convective heat transmission and forecast more accurate heat transfer rates in various fields.

Due to its helpful characteristics, ferrous-copper hybrid nanofluid is a desirable coolant for an electrical device. The research would benefit scientists and engineers by improving their comprehension of how to analyse convective heat transmission and forecast more accurate heat transfer rates in cutting-edge technological systems used in sectors like thermal transportation, cooling systems for electronic devices, etc.

Entropy generation is used for an evaluation of the system’s performance, which is an indicator of optimal design. Hence, in recent times, it does a good engineering sense to draw attention to irreversibility under magnetic force, and it has an indispensable impact on investigation of electronic devices.

An efficient numerical technique has been developed to solve this problem. The originality of this work is to analyse convective energy transport and entropy generation in a chamber with internal block, which is capable of maintaining heat and producing heat. Effects of irreversibility ratio are scrutinized for the first time. Analysis of convective heat transfer and entropy production in an enclosure with internal isothermal/heat generating blocks gives the way to predict enhanced heat transfer rate and avoid the failure of advanced technical systems in industrial sectors.

This paper aims to focus on the analysis of the entropy generation in an inclined square cavity filled with a porous media saturated by a nanofluid with sinusoidal temperature distribution on the side walls, adiabatic conditions on the upper wall and a heat source at the lower wall.

The two-phase nanofluid model including the Brownian diffusion and thermophoresis effects has been used for simulation of nanofluid transport inside the porous cavity. The governing equations and the entropy generation owing to fluid friction, heat and mass transfer are transformed in terms of the dimensionless variables, and the results are obtained by using the finite difference method of the second-order accuracy.

The numerical results of the model are investigated, and the effect of different important parameters, such as inclination angle of the cavity, amplitude ratio of the sinusoidal temperature or phase deviation, is discussed. The results for no inclination of the cavity is compared and successfully validated with previous reported results of the literature. The important findings of the study are focused mainly on the existence of the irreversibility phenomena which are affected by the conditions of the model and the values of the studied parameters.

The originality of this work is given by the presented mathematical model, the numerical solution with new results for entropy generation in an inclined porous cavity filled by a nanofluid and the applications for design of electronic or energy devices.

The analysis of fluid flow and thermal transport performance inside the cavity has found numerous applications in various engineering fields, such as nuclear reactors and solar collectors. Nowadays, researchers are concentrating on improving heat transfer by using ternary nanofluids. With this motivation, the present study analyzes the natural convective flow and heat transfer efficiency of ternary nanofluids in different types of porous square cavities.

The cavity inclination angle is fixed ω = 0 in case (I) and ω=π4 in case (II). The traditional fluid is water, and Fe3O4+MWCNT+Cu/H2O is treated as a working fluid. Ternary nanofluid's thermophysical properties are considered, according to the Tiwari–Das model. The marker-and-cell numerical scheme is adopted to solve the transformed dimensionless mathematical model with associated initial–boundary conditions.

The average heat transfer rate is computed for four combinations of ternary nanofluids: Fe3O4(25%)+MWCNT(25%)+Cu(50%),Fe3O4(50%)+MWCNT(25%)+Cu(25%),Fe3O4(33.3%)+MWCNT(33.3%)+Cu(33.3%) and Fe3O4(25%)+MWCNT(50%)+Cu(25%) under the influence of various physical factors such as volume fraction of nanoparticles, inclined magnetic field, cavity inclination angle, porous medium, internal heat generation/absorption and thermal radiation. The transport phenomena within the square cavity are graphically displayed via streamlines, isotherms, local and average Nusselt number profiles with adequate physical interpretations.

The purpose of this study is to determine whether the ternary nanofluids may be used to achieve the high thermal transmission in nuclear power systems, generators and electronic device applications.

The current analysis is useful to improve the thermal features of nuclear reactors, solar collectors, energy storage and hybrid fuel cells.

To the best of the authors’ knowledge, no research has been carried out related to the magneto-hydrodynamic natural convective Fe3O4+MWCNT+Cu/H2O ternary nanofluid flow and heat transmission filled in porous square cavities with an inclined cavity angle. The computational outcomes revealed that the average heat transfer depends not only on the nanoparticle’s volume concentration but also on the existence of heat source and sink.

The purpose of this paper is to study the natural convection and radiation heat transfer inside Nonagon inclined cavity with variable heated source length, which contains a porous medium saturated with nanofluid in the presence of uniform heat generation or absorption under the effect of uniform magnetic field with variable direction. The shape factor of nano particles is taking account for the model of nanofluid.

This study is established in two-dimensional space. The 2D numerical study is effectuated with Comsol Multiphysics based on the on the finite element method. The 2D equation system is exposed on dimensionless form taking into account the boundary conditions.

Results obtained show that the convection heat transfer is ameliorated with the augmentation of heated source length. The convection heat transfer is enhanced by increasing Rayleigh, Darcy numbers and the heated source length; however, it is reduced by rising Hartmann number. The presence of radiation parameter lead to improve the convection heat transfer in the presence of both uniform heat generation/absorption. The average Nusselt number reaches a maximum for an inclination of cavity γ = 45° and a minimum for γ = 60°. Both the increase of the shape factor of nano particles and the solid fraction of nano particles improve the convection heat transfer.

Different studies have been realized to study the heat transfer inside cavity contains porous medium saturated with nanofluid under magnetic field effect. In this work, the Nonagon geometric of cavity studied has never been studied. In addition, the effect of radiation parameter with relation of the shape factor of nanoparticles in the presence of uniform heat generation/absorption on the heat transfer performance have never been investigated. Also, the effect of magnetic field direction with relation of the inclination cavity on heat transfer performance.

The purpose of this paper is to carry out a comprehensive review of some latest studies devoted to natural convection phenomenon in the enclosures because of its significant industrial applications.

Geometries of the enclosures have considerable influences on the heat transfer which will be important in energy consumption. The most useful geometries in engineering fields are treated in this literature, and their effects on the fluid flow and heat transfer are presented.

A great variety of geometries included with different physical and thermal boundary conditions, heat sources and fluid/nanofluid media are analyzed. Moreover, the results of different types of methods including experimental, analytical and numerical are obtained. Different natures of natural convection phenomenon including laminar, steady-state and transient, turbulent are covered. Overall, the present review enhances the insight of researchers into choosing the best geometry for thermal process.

A comprehensive review on the most practical geometries in the industrial application is performed.

This paper aims to study the magnetohydrodynamic (MHD)-free convection flow in an inclined square cavity filled with both nanofluids and gyrotactic microorganism.

The benefits of adding motile microorganisms to the suspension include enhanced mass transfer, microscale mixing and anticipated improved stability of the nanofluid. The model includes equations expressing conservation of total mass, momentum, thermal energy, nanoparticles, microorganisms and oxygen. Physical mechanisms responsible for the slip velocity between the nanoparticles and the base fluid, such as Brownian motion and thermophoresis, are accounted for in the model.

It has been found that the Hartmann number suppresses the heat and mass transfer, while the cavity and magnetic field inclination angles characterize a non-monotonic behavior of the all considered parameters. A rise of the Hartmann number leads to a reduction of the influence rate of the magnetic field inclination angle.

The present results are original and new for the study of MHD-free convection flow in an inclined square cavity filled with both nanofluids and gyrotactic microorganisms.

The aim of this work consists of studying numerically the coupling between natural convection and radiation in a tall rectangular cavity by examining the effect of the emissivity of the walls, ε, the Rayleigh number, Ra, and the inclination of the cavity, θ, on the flow characteristics and the existence ranges of the multiple solutions obtained.

The Navier‐Stokes equations were discretized by using a finite difference technique. The vorticity and energy equations were solved by the alternating direction implicit method. Values of the stream function were obtained by using the point successive over‐relaxation method. The calculation of the radiative heat exchange between the walls of the cavity is based on the radiosity method.

For an inclined cavity (θ=45°), up to four different solutions are obtained and their range of existence is found to be strongly dependent on the Rayleigh number and the emissivity of the cavity walls. In the case of a vertical cavity (θ=90°), the weak reduction of the convection effect due to radiation is largely compensated for by the contribution of the radiation which enhances the overall heat transfer through the cold surface of the cavity and favours the appearance of secondary cells.

The existence of multiple steady‐state solutions in an inclined cavity (θ=45°) and the number of the obtained solutions are affected by the presence of radiation. In face, the increase of the emissivity reduces the number of solutions for weak values of the Rayleigh number. Also, the increase of this parameter favours the multiplicity of solutions for all the considered values of the emissivity. For a vertical cavity (θ=90°), the effect of radiation generates an oscillatory convection for large values of the Rayleigh number.

The purpose of this paper is to propose correlations between Nusselt and Rayleigh numbers for the case of inclined and closed air-filled hemispherical cavities. The disk of such cavities is subjected to a constant heat flux. The study covers a wide range of Rayleigh numbers from 5×107 to 2.55×1012.

Correlations are obtained from numerical approach validated by experimental measurements on some configurations, valid for several angles of inclination of the cavity between 0° (horizontal disk) and 90° (vertical disk) in steps of 15°.

The statistical analysis of a large number of calculations leads to reliable results covering laminar, transitional and turbulent natural convection heat transfer zones.

The proposed correlations provide solutions for applications in several fields of engineering such as solar energy, aerospace, building, safety and security.

The new relations proposed are the first published for high Rayleigh numbers for this type of geometry. They supplement the knowledge of natural convection in hemispherical inclined cavities and constitute a useful tool for application in various engineering areas as solar energy (thermal collector, still, pyranometer, albedometer, pyrgeometer), aerospace (embarked electronics), building, safety and security (controlling and recording sensors).

This paper aims to study numerically the steady natural convective heat transfer of a hybrid nanosuspension (Ag-MgO/H2O) within a partially heated/cooled trapezoidal region with linear temperature profiles at inclined walls under an effect of uniform Lorentz force. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates.

The governing equations formulated using the Oberbeck–Boussinesq approach and single-phase nanoliquid model are transformed to a non-dimensional form by using non-dimensional variables. The obtained equations with appropriate boundary conditions are resolved by the finite difference technique. The developed code has been validated comprehensively. Analysis has been performed for a wide range of governing parameters, including Rayleigh number (Ra = 105), Prandtl number (Pr = 6.82), Hartmann number (Ha = 0–100), magnetic field inclination angle (φ = 0–?/2) and nanoparticles volume fraction (φ_hnf = 0 and 2%).

It has been shown that inclined magnetic field can be used to manage the energy transport performance. An inclusion of nanoparticles without Lorentz force influence allows forming more stable convective regime with descending heat plume in the central zone, while such a regime was performed for clear fluid only for moderate and high Hartmann numbers. Moreover, the average overall entropy generation can be decreased with a growth of the Hartmann number, while an addition of hybrid nanoparticles allows reducing this parameter for Ha = 30 and 50. The average Nusselt number can be increased with a growth of the nanoparticles concentration for low values of the magnetic field intensity.

Governing equations written using the conservation laws and dimensionless non-primitive variables have been resolved by the finite difference approach. The created numerical code has been verified by applying the grid independence test and computational outcomes of other researchers. The comprehensive analysis for various key parameters has been performed.