Search results
1 – 8 of 8Xiaowei Shao, Jihe Wang, Dexin Zhang and Junli Chen
The purpose of this paper is to propose a modified fuel-balanced formation keeping strategy based on actively rotating satellites in the formation in the J2 perturbed environment.
Abstract
Purpose
The purpose of this paper is to propose a modified fuel-balanced formation keeping strategy based on actively rotating satellites in the formation in the J2 perturbed environment.
Design/methodology/approach
Based on the relative orbital elements theory, the J2 perturbed relative motions between different satellites in the formation are analyzed, and then, the method to estimate fuel required to keep the in-plane and out-of-plane relative motions is presented, based on which a modified fuel-balanced formation keeping strategy is derived by considering both in-plane and out-of-plane J2 perturbations.
Findings
Numerical simulations demonstrate that the modified fuel-balanced formation keeping strategy is valid, and the modified fuel-balanced formation keeping strategy requires less total fuel consumption than original Vadali and Alfriend’s method.
Research limitations/implications
The modified fuel-balanced formation keeping strategy is valid for formation flying mission whose member satellite is in circular or near-circular orbit.
Practical implications
The modified fuel-balanced formation keeping strategy can be used to solve formation flying keeping problem, which involves multiple satellites in the formation.
Originality/value
The modified fuel-balanced formation keeping strategy is proposed by considering both in-plane and out-of-plane J2 perturbations, which further reduce the fuel consumption than the original Vadali and Alfriend’s method.
Details
Keywords
Xiaowei Shao, Mingxuan Song, Dexin Zhang and Ran Sun
The purpose of this paper is to present a method to conduct small satellite rendezvous mission by using the differential aerodynamic forces under J2 perturbation in low earth…
Abstract
Purpose
The purpose of this paper is to present a method to conduct small satellite rendezvous mission by using the differential aerodynamic forces under J2 perturbation in low earth orbit (LEO).
Design/methodology/approach
Each spacecraft is assumed to be equipped with two large flat plates, which can be controlled for generating differential accelerations in all three directions. Based on the kinetic theory, the aerodynamic lift and drag generated by a flat plate are calculated. To describe the relative dynamics under J2 perturbation, a modified model is derived from the high-fidelity linearized J2 equations proposed by Schweighart and Sedwick.
Findings
Simulation results demonstrate that the proposed method is valid and efficient to solve satellite rendezvous problem, and the modified model considering J2 effect shows better accuracy than the Horsley’s Clohessy–Wiltshire-based model.
Research limitations/implications
Because aerodynamic force will reduce drastically as orbital altitude rises, the rendezvous control strategy for small satellites presented in this paper should be limited to the scenarios when satellites are in LEO.
Practical implications
The rendezvous control method in this paper can be applied to solve satellite rendezvous maneuver problem for small satellites in LEO.
Originality/value
This paper proposes a modified differential aerodynamic control model by considering J2 perturbation, and simulation results show that it can achieve higher rendezvous control accuracy.
Details
Keywords
Jihe Wang, Xibin Cao and Jinxiu Zhang
The purpose of this paper is to propose a fuel‐optimal virtual centre selection method for formation flying maintenance in the J2 perturbed environment.
Abstract
Purpose
The purpose of this paper is to propose a fuel‐optimal virtual centre selection method for formation flying maintenance in the J2 perturbed environment.
Design/methodology/approach
Based on the relative orbital elements (ROE) theory, the J2 perturbed relative motions between different satellites in the formation are analyzed, and then the fuel‐optimal virtual centre selection issue for formation flying maintenance are parameterized in terms of ROE. In order to determine the optimal virtual centre, two theories are proposed in terms of ROE.
Findings
Numerical simulations demonstrate that the fuel‐optimal virtual centre selection method is valid, and the control of the ROE of each satellite with respect to a virtual optimal centre of the formation is more efficient regarding the fuel consumption than the control of all satellites with respect to a satellite belonging to the formation.
Research limitations/implications
The fuel‐optimal virtual centre selection method is valid for formation flying mission whose member satellite in circular or near circular orbit.
Practical implications
The fuel‐optimal virtual centre selection approach can be used to solve formation flying maintenance problem which involves multiple satellites in the formation.
Originality/value
The paper proposes a fuel‐optimal virtual centre selection method in terms of ROE, and shows that keeping the formation with respect the optimal virtual centre is more fuel efficient.
Details
Keywords
Xiaowei Shao, Mingxuan Song, Jihe Wang, Dexin Zhang and Junli Chen
The purpose of this paper is to present a method to achieve small satellite formation keeping operations by using the differential lift and drag to control the drift caused by J2…
Abstract
Purpose
The purpose of this paper is to present a method to achieve small satellite formation keeping operations by using the differential lift and drag to control the drift caused by J2 perturbation in circular or near-circular low earth orbits (LEOs).
Design/methodology/approach
Each spacecraft is equipped with five large flat plates, which can be controlled to generate differential accelerations. The aerodynamic lift and drag acting on a flat plate is calculated by the kinetic theory. To maintain the formation within tracking error bounds in the presence of J2 perturbation, a nonlinear Lyapunov-based feedback control law is designed.
Findings
Simulation results demonstrate that the proposed method is efficient for the satellite formation keeping and better accuracy advantage in comparison with classical approaches via the fixed maximum differential aerodynamic acceleration.
Research limitations/implications
Because the aerodynamic force will reduce drastically as the orbital altitude increases, the formation keeping control strategy for small satellites presented in this paper should be limited to the scenarios when satellites are in LEO.
Practical implications
The formation keeping control method in this paper can be applied to solve satellite formation keeping problem for small satellites in LEO.
Originality/value
This paper proposes a Lyapunov control strategy for satellite formation keeping considering both lift and drag forces, and simulation results show better performance with high accuracy under J2 perturbation.
Details
Keywords
Jihe Wang, Dexin Zhang, GuoZhong Chen and Xiaowei Shao
The purpose of this paper is to propose a new fuel-balanced formation keeping reference trajectories planning method based on selecting the virtual reference center(VRC) in a…
Abstract
Purpose
The purpose of this paper is to propose a new fuel-balanced formation keeping reference trajectories planning method based on selecting the virtual reference center(VRC) in a fuel-balanced sense in terms of relative eccentricity and inclination vectors (E/I vectors).
Design/methodology/approach
By using the geometrical intuitive relative E/I vectors theory, the fuel-balanced VRC selection problem is reformulated as the geometrical problem to find the optimal point to equalize the distances between the VRC and the points determined by the relative E/I vectors of satellites in relative E/I vectors plane, which is solved by nonlinear programming method.
Findings
Numerical simulations demonstrate that the new proposed fuel-balanced formation keeping strategy is valid, and the new method achieves better fuel-balanced performance than the traditional method, which keeps formation with respect to geometrical formation center.
Research limitations/implications
The new fuel-balanced formation keeping reference trajectories planning method is valid for formation flying mission whose member satellite is in circular or near circular orbit in J2 perturbed orbit environment.
Practical implications
The new fuel-balanced formation keeping reference trajectories planning method can be used to solve formation flying keeping problem, which involves multiple satellites in the formation.
Originality/value
The fuel-balanced reference trajectories planning problem is reformulated as a geometrical problem, which can provide insightful way to understand the dynamic nature of the fuel-balanced reference trajectories planning issue.
Details
Keywords
Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the…
Abstract
Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.
Details
Keywords
Ran Sun, Aidang Shan, Chengxi Zhang and Qingxian Jia
This paper aims to investigate the feasibility of using the combination of Lorentz force and aerodynamic force as a propellantless control method for spacecraft formation.
Abstract
Purpose
This paper aims to investigate the feasibility of using the combination of Lorentz force and aerodynamic force as a propellantless control method for spacecraft formation.
Design/methodology/approach
It is assumed that each spacecraft is equipped with several large flat plates, which can rotate to produce aerodynamic force. Lorentz force can be achieved by modulating spacecraft’s electrostatic charge. An adaptive output feedback controller is designed based on a sliding mode observer to account for unknown uncertainties and the absence of relative velocity measurements. Aiming at distributing the control input, an optimal control allocation method is proposed to calculate the electrostatic charge of the Lorentz spacecraft and control commands for the atmospheric-based actuators.
Findings
Numerical examples are provided to demonstrate the effectiveness of the proposed control strategy in the presence of J2 perturbations. Simulation results show that relative motion in a formation can be precisely controlled by the proposed propellantless control method under uncertainties and unavailability of velocity measurements.
Research limitations/implications
The controllability of the system is not theoretically investigated in the current work.
Practical implications
The proposed control method introduced in this paper can be applied for small satellites formation in low Earth orbit.
Originality/value
The main contribution of the paper is the proposal of the propellantless control approach for satellite formation using the combination of Lorentz force and aerodynamic force, which can eliminate the requirement of the propulsion system.
Details
Keywords
Presents a finite element formulation of the layout optimization and design sensitivity applied to doubly‐curved shells of revolution. The objectives of the optimization are to…
Abstract
Presents a finite element formulation of the layout optimization and design sensitivity applied to doubly‐curved shells of revolution. The objectives of the optimization are to maximize buckling pressures and first‐ply‐failure pressures. The problem is formulated and solved with the use of geometrically non‐linear transverse shear shell theory. However, the optimization method proposed limits the sensitivity analysis to a geometrically linear problem. Focuses special attention on the formulation of the optimization problem taking into account various factors, such as the form of geometrical and physical relations, types of design variables and the finite element discretization. Demonstrates several numerical examples to illustrate the capability of the proposed optimization procedures.
Details