Search results

Optimisation of daylight admission through window is crucial for alleviating glare while maintaining useful daylight levels in order to enhance occupants' health, visual comfort and moderating lighting energy consumption. Amongst various solutions, fixed external shade is an affordable solution for housing spaces that need to be sophisticatedly designed, especially during the period of increasing home spaces as working environments. In the humid subtropical region, daylight control plays an important role in indoor comfort, particularly with areas with a high window to wall ratio (WWR). Due to the insufficient amount of such study on non-office spaces in Australia, shading-related standards are not addressed in Australian building codes.

The chosen methodology for the research is a quantitative data collection and analysis through field measurement and simulation simultaneously. The first step is a multi-objective optimisation of shading elements through a non-dominated sorting genetic algorithm (NSGA-II) on parametric modelling via Rhino3D CAD and simulation engines (DIVA and ClimateStudio). In the second phase, the Pareto front solutions are validated by experimental measurements within a room with a single north-facing window (the most probable for the daytime glare in Sydney) for the seven most common local window configurations.

Through the simulation of ten genes, 1,560 values and 2.4 × 1,019 of search space, this study found an optimum shade for each local common window layout, resulted in +22% in (UDI) and −16% in views with discomfort glare on average. Moreover, an all-purpose polygonal shade showed an average of 4.6% increase in UDI and a 5.83% decrease in the percentage of views with discomfort glare.

The findings are subject to the room dimensions, window dimensions and layouts, and orientation of windows for selected residential buildings in Sydney.

The study contributes to the development of highly accurate fixed external shading systems with rectangular and tapered-form external shapes. A real-time measurement by luminance-metre sensors and HQ cameras located at six eye levels is conducted to corroborate simulation results of the visual comfort.

The paper aims to investigate the comfort-related performances of an innovative solar shading solution based on a new composite patented material that consists of a cement-based matrix coupled with a stretchable three-dimensional textile. The paper’s aim is, through a performance-based generative design approach, to develop a high-performance static shading system able to guarantee adequate daylit spaces, a connection with the outdoors and a glare-free environment in the view of a holistic and occupant-centric daylight assessment.

The paper describes the design and simulation process of a complex static shading system for digital manufacturing purposes. Initially, the optical material properties were characterized to calibrate radiance-based simulations. The developed models were then implemented in a multi-objective genetic optimization algorithm to improve the shading geometries, and their performance was assessed and compared with traditional external louvres and overhangs.

The system developed demonstrates, for a reference office space located in Milan (Italy), the potential of increasing useful daylight illuminance by 35% with a reduced glare of up to 70%–80% while providing better uniformity and connection with the outdoors as a result of a topological optimization of the shape and position of the openings.

The paper presents the innovative nature of a new composite material that, coupled with the proposed performance-based optimization process, enables the fabrication of optimized shading/cladding surfaces with complex geometries whose formability does not require ad hoc formworks, making the process fast and economic.

This paper aims to study employee mental health in relation to workplace design and indoor environmental quality (IEQ) when working from home, which has received little attention. The trend toward hybrid working urges for more knowledge.

Through a mixed data collection method, this study analyzed potential relationships (between mental health, workplace design and IEQ) from information obtained through a cross-sectional survey, repeated point-in-time surveys and desk-based IEQ sensors at home. Data were collected in April 2020 during a national COVID-19 lockdown in The Netherlands amongst 36 subjects. They all worked full time from home in this period and together completed 321 point-in-time surveys. The three data sets were combined and analyzed using bivariate and path analysis.

Outcomes indicate that subjective and objective IEQ conditions, workplace suitability and distraction affect employee mental health in the home workplace in a similar way as in the office. Being satisfied with the noise level increases concentration, self-reported well-being and engagement. High sound pressure levels (>58 dB) increased tension or nervous feelings.

To the best of the authors’ knowledge, this study is one of the first to explore employee mental health in relation to simultaneously assessed (perceived and measured) multiple IEQ parameters in the home workplace.

Employees’ satisfaction and productivity is one of the main interests of employers. Psychological comfort can cause dissatisfaction with their work. Thus, it is important to understand what factors contribute to employees’ satisfaction in workplaces. The purpose of this paper is to identify the weight of contribution of each design parameter on increasing psychological satisfaction.

The study included 579 employees in five offices in The Netherlands through an online survey. The typologies of offices vary in terms of office layouts, orientations and façade. Additionally, a parameter of desk location was included as this factor may be associated with user satisfaction. Kruskal–Wallis H test, categorical regression, and logistic regression analyses were performed to examine the impact of these design parameters on psychological user satisfaction.

The results revealed the impact of design parameters on the psychological satisfaction. The parameters of office layouts and desk locations were the significant predictor factors for the probability of satisfaction variables (e.g. privacy, concentration, communication, social contact and territoriality). The parameters for optimal satisfaction were found in cellular office, north-west oriented workstation and 4 m away from a window.

Psychological comfort is an inevitable aspect in user satisfaction studies. This paper, therefore, measures and predicts the relationship between design factors and employees’ satisfaction through case studies in The Netherlands. The findings help designers, architects, planners and facility managers to develop user-focussed office design principles supporting employees’ work performance.

In order to be able to use the aroma hand massage as a skill that can be done by a nurse who does not have a special aromatherapy technique, we examine anti-stress effects of simplified aroma hand massage for healthy subjects. We evaluated the anti-stress action of aroma hand massage and the different components of the procedure in 20 healthy women in their twenties. We used autonomic nervous function measured via electrocardiogram as an index of stress. After conducting a baseline electrocardiogram, we induced stress in the participants by asking them to spend 30 minutes completing Kraepelin's arithmetic test. We then administered various treatments and examined the anti-stress effects. Kraepelin's test significantly increased sympathetic nervous function and significantly reduced parasympathetic nervous function. Compared with massage without essential oil or aroma inhalation, aroma hand massage significantly increased parasympathetic nervous function and significantly decreased sympathetic nervous function. The effect of the aroma hand massage persisted when the procedure was simplified. The anti-stress action of the aroma hand massage indicates that it might have beneficial application as a nursing technique. There are several limitations in this study; ambiguities of low component/high component ratio of heart rate variability and bias by small subjects groups of the same women.

To clarify the physiological and psychological effects of deep breathing, the effects of extreme prolongation of expiration breathing (Okinaga) were investigated using electroencephalogram (EEG) and electrocardiogram (ECG). Participants were five male Okinaga practitioners in their 50s and 60s. Participants performed Okinaga for 31 minutes while continuous EEG and ECG measurements were taken. After 16 minutes of Okinaga, and until the end of the session, the percentages of theta and alpha 2 waves were significantly higher than at baseline. After 20 minutes, and until the end of the session, the percentage of beta waves was significantly lower than at baseline. The high frequency component of heart rate variability was significantly lower after 12 minutes of Okinaga and lasted until 23 minutes. The low frequency/high frequency ratio was significantly lower after 18 minutes of Okinaga and until the end of the session. Okinaga produced relaxation, suggesting that deep breathing may relieve anxiety. However, study limitations include potential ambiguity in the interpretation of the low frequency/high frequency ratio, the small sample, and the fact that EEG was measured only on the forehead.

The present shift and change in the human lifestyle across the world are undeniable. Currently, individuals spend a substantial amount of time indoors due to the global COVID-19 pandemic that strikes the entire world. This change in human lifestyle has devastating effects on human health and productivity. As a result, the influence of indoor environmental quality (IEQ) on the health and productivity of building users becomes a critical field of research that requires immediate attention. As a result, the purpose of this study is to review the state-of-the-art literature by establishing a connection between the factors that influence health and productivity in any given indoor environment.

The methodology involves a thorough review of selected published journals from 1983 to 2021, and the result was analysed through content analysis. The search included journal articles, books and conference proceedings on the critical factors influencing IEQ and their impact on building occupants, which was sourced from different databases such as ScienceDirect, Taylor, GoogleScholar and Web of Science.

The findings from the 90 selected articles revealed four critical factors influencing the quality of the indoor environment and are categorised into; indoor air quality, indoor thermal comfort, visual comfort and acoustic comfort. The findings suggested that when developing a system for controlling the quality of the indoor environment, the indoor air quality, indoor thermal comfort, visual comfort and acoustic comfort should be taken into account.

The indoor environment deeply impacts the health of individuals in their living and work environments. Industry must have a moral responsibility to provide health facilities in which people and workers feel satisfies and give conditions for prosperity. Addressing these essential aspects will not only help the decision-making process of construction professionals but also encourages innovative construction techniques that will enhance the satisfaction, wellness and performance of building occupants.

Achieving an appropriate indoor environment quality (IEQ) is crucial to a green office environment. Whilst much research has been carried out across the globe on the ideal IEQ for green offices, little is known about which indoor environment New Zealand office workers prefer and regard as most appropriate. This study investigated New Zealand office workers' preference for a green environment.

Workers were conveniently selected for a questionnaire survey study from two major cities in the country – Wellington and Auckland. The perception of 149 workers was analysed and discussed based on the workers' demographics. The responses to each question were analysed based on the mean, standard deviation, frequency of responses and difference in opinion.

The results showed that workers' preferences for an ideal IEQ in green work environments depend largely on demographics. New Zealand office workers prefer work environments to have more fresh air and rely on mixed-mode ventilation and lighting systems. Also New Zealand office workers like to have better acoustic quality with less distraction and background noise. Regarding temperature, workers prefer workspaces to be neither cooler nor warmer. Unique to New Zealand workers, the workers prefer to have some (not complete) individual control over the IEQ in offices.

This study was conducted in the summer season, which could have impacted the responses received. Also the sample size was limited to two major cities in the country. Further studies should be conducted in other regions and during different seasons.

This study provides the opportunity for more studies in this area of research and highlights significant findings worthy of critical investigations. The results of this study benefit various stakeholders, such as facilities managers and workplace designers, and support proactive response approaches to achieving building occupants' preferences for an ideal work environment.

This study is the first research in New Zealand to explore worker preferences of IEQ that is not limited to a particular building, expanding the body of knowledge on workers' perception of the ideal work environment in the country.

Given the climatic context and economic challenge of Ghana in its developmental strides, energy use of office buildings continues to be a task on the economy. Therefore, the study was about finding measures that could reduce cooling loads in 10 office buildings. The paper presents the outcome of a long-term study of the thermal conditions in a selected number of office buildings in Accra and Kumasi, Ghana.

Through long-term monitoring of environmental data, the buildings were consequently modelled in a simulation application. Thereafter, a validation of the simulation models (using regression coefficients, r² of 0.53–0.90) was undertaken towards finding measures to reduce cooling loads.

The results showed various potentials of efficient lighting, thermal mass, night ventilation, insulation to attic floors, efficient glazing, blind deployments, etc. in reducing cooling loads in the range of 2–17.5%. By combining the potential measures to study their synergistic effects on the loads, 35, 39 and 38% improvements were achieved for the low-rise, multi-storey and fully glazed office buildings.

These potential measures ought to be incorporated in the design, specification, construction and operation of Ghanaian office buildings to reduce the burden on the economy and the environment. Now more than ever, there is the need for climatic regions to come up with empirical data that could help relieve the world's economies from the post-pandemic stress.

The Middle East and North Africa (MENA) region is known for its extreme weather conditions during Summer. A major determinant of the sustainability of the design of a building is its fenestrations. The purpose of this paper is to explore the problem of designing and locating windows on building facades such that a number of relevant criteria to the MENA region are optimised, including solar heat gain, privacy, daylighting and cost of installation.

A multi-objective optimisation problem is proposed with the focus on capturing the requirements of residential dwellings in the MENA region. Since the problem contains conflicting objectives that need to be optimised, a lexicographic approach is adopted. In order to display the Pareto curve, a bi-objective analysis based on the ε-constraint method is utilised.

The conflicting nature of the proposed problem is indicated via the Pareto optimal solutions yielded. Depending on the preference of criteria adopted in lexicographic optimisation, the location of the windows on the building façade tends to change. The bi-objective analysis indicates the importance of balancing out the daylight factor against each of privacy, solar heat gain and installation cost criteria. Furthermore, an analysis conducted in three major cities in the MENA region highlights the discrepancy in design alternatives generated depending on the local climatic condition.

This work proposes a novel mathematical optimisation model which focuses on producing a sustainable design and layout for windows on the facades of residential dwellings located in the MENA region. The proposed model provides designers with guidance through an automated support tool that yields optimised window designs and layout to ensure the sustainability of their designed buildings.