Search results

Is there a secret recipe for economic growth?

No, there is no recipe, but we can extrapolate some pieces of advice from Adam Smith.

An economy can leave behind its “dull” stagnant state and grow when its markets expand, when the productivity of its workers increases thanks to high compensations, which are seen as incentives to work harder and when lobbying and cronyism are kept at bay. Luck plays a role too, but these three ingredients are necessary, even if not sufficient, for an economy to grow and thus be “cheerful.”

These three aspects – expansion of market, liberal compensation of workers and lobbying – especially combined, have often been underestimated in Smith’s understanding of the possible sources of economic growth.

This paper aims to examine how a partnering contract facilitates project values and the culture in a construction project and the consequences of said facilitation. Hence, it answers the following research questions: 1) How does the contractual framework in Bispevika facilitate relational culture? 2) What effects of this facilitation can be identified in the early phase of development?

An explorative approach is taken into a single case. A literature study into the topics of relational contracting and culture provides a backdrop for the study. The empirical work consists of a study of the construction contracts and six in-depth interviews with actors from the supply-chain.

Contractual elements affect the project organizations’ motivation. On the basis of existing literature, five contractual elements are identified explicitly in the contracts: “shared goals”, “incentives and bonus”, “open book”, “colocation”, and “design-build”.

The data collection is restricted to a single point in time in a single project. Further research is necessary both at a later stage in the same case and in similar projects.

The paper identifies the effects that proper use of contractual elements has on the relational culture in a construction project and is, therefore, important for subsequent research within the area.

In addition to identifying the existing contractual elements, the interviews also revealed two additional practices that might be useful for subsequent research: “involvement of executive management” and “subsequent contracts dependent on previous project performance”.

This paper aims to look at the future development of new tourism attractions through the visionary project of a leading Vietnamese developer in a remote area of Northern Vietnam in the Quang Ninh province.

Drawing from the theoretical perspective of place-making and the hero’s journey, this paper draws insights from a case study, an interview with two key informants in the private sector and literature review, to generate the drivers that will shape the future of tourism development in Yen Tu.

This paper identifies the visionary hero (leader), intangible heritage and creative place-making as the key drivers that will reconstruct and repackage the past for developing tourism destinations.

This paper extends the existing knowledge in the literature about the natural heritage and sacred mountains of Yen Tu, and included creative place-making to gain insights into the future of tourism development in rural areas.

This paper aims to present a comprehensive review of the laser engineered net shaping (LENS) process in an attempt to provide the reader with a deep understanding of the controllable and fixed build parameters of metallic parts. The authors discuss the effect and interplay between process parameters, including: laser power, scan speed and powder feed rate. Further, the authors show the interplay between process parameters is pivotal in achieving the desired microstructure, macrostructure, geometrical accuracy and mechanical properties.

In this manuscript, the authors review current research examining the process inputs and their influences on the final product when manufacturing with the LENS process. The authors also discuss how these parameters relate to important build aspects such as melt-pool dimensions, the volume of porosity and geometry accuracy.

The authors conclude that studies have greatly enriched the understanding of the LENS build process, however, much studies remains to be done. Importantly, the authors reveal that to date there are a number of detailed theoretical models that predict the end properties of deposition, however, much more study is necessary to allow for reasonable prediction of the build process for standard industrial parts, based on the synchronistic behavior of the input parameters.

This paper intends to raise questions about the possible research areas that could potentially promote the effectiveness of this LENS technology.

As the police service across England and Wales moves towards degree-level study for new recruits as a component of recognising the profession of policing, this paper describes and discusses the introduction of the Police Constable Degree Apprenticeship (PCDA) and the core skills of evidence-based policing (EBP) as an educational theme for solving work-based problems.

Authored by both policing practitioners and researchers, this paper refers to key literature whilst exploring the implementation of the PCDA as a component of a Policing Education Qualifications Framework (PEQF). It highlights some of the challenges faced with its implementation along with the benefits of the adopting this degree-level education and work-based programme where EBP is embedded in to both study and professional practice.

There are significant benefits to the police service of adopting the PCDA as one of the entry routes for new police constables and embracing the educational development and professional application of EBP. However, this does not come without a number of challenges for the service and the professional body for policing.

This paper, co-authored by both policing practitioners and researchers, provides a contemporary view on the introduction of the PCDA as an initial entry route for new police constables and the embedding of EBP within both their learning and professional practice. As the first graduates complete their studies, the paper discusses the opportunities the adoption presents and the challenges it faces both locally and nationally.

Mental health is an emerging health policy priority globally. The emphasis on closing the treatment gap in psychiatric services is now being complemented by an increasing focus on prevention and health promotion. The purpose of this paper is to describe the programmes and delivery of public mental health in England led by Public Health England (PHE), an arms-length body of the Department of Health and Social Care.

This technical paper outlines the general approach PHE has taken in delivering national work in public mental health and describes several key areas of work: children and young people, suicide prevention, workplace and workforce, strategic engagement with stakeholders, data and information and evidence synthesis.

A description of the various programmes and guidance documents that PHE have produced are described and referenced, which form a substantial body of work in public mental health.

The outputs from PHE may assist in informing the approach to public mental health that other government agencies could consider adopting. The resources described and signposted within this technical paper are publicly available for readers.

England is one of a small group of countries that have a track record in delivering public mental health at a national level. This paper gives a unique and detailed insight into this work.

The International Network of Research Management Societies (INORMS) celebrated its 20^th anniversary in 2021. It was established to increase communication among research management societies. The need for a formal international research management community developed because there was (1) increased international funding of research, (2) the number of international research collaborations was growing, and (3) there was a need to understand research regulations in other countries. INORMS sought to address these issues through international congresses and by providing a forum for member societies to work more closely together on common issues. Membership in INORMS steadily increased over the years. The 20^th anniversary meeting was highlighted with the signing of the Hiroshima Statement that described a research manager’s principles and responsibilities, which include collegiality, inclusiveness, professionalisation, innovation, and accountability. This chapter summarises the factors that led to the formation of INORMS and its history.

This study aims to provide a comprehensive overview of the current state of the art in powder bed fusion (PBF) techniques for additive manufacturing of multiple materials. It reviews the emerging technologies in PBF multimaterial printing and summarizes the latest simulation approaches for modeling them. The topic of “multimaterial PBF techniques” is still very new, undeveloped, and of interest to academia and industry on many levels.

This is a review paper. The study approach was to carefully search for and investigate notable works and peer-reviewed publications concerning multimaterial three-dimensional printing using PBF techniques. The current methodologies, as well as their advantages and disadvantages, are cross-compared through a systematic review.

The results show that the development of multimaterial PBF techniques is still in its infancy as many fundamental “research” questions have yet to be addressed before production. Experimentation has many limitations and is costly; therefore, modeling and simulation can be very helpful and is, of course, possible; however, it is heavily dependent on the material data and computational power, so it needs further development in future studies.

This work investigates the multimaterial PBF techniques and discusses the novel printing methods with practical examples. Our literature survey revealed that the number of accounts on the predictive modeling of stresses and optimizing laser scan strategies in multimaterial PBF is low with a (very) limited range of applications. To facilitate future developments in this direction, the key information of the simulation efforts and the state-of-the-art computational models of multimaterial PBF are provided.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

Kerala is one of India's most advanced states in human development and other social indices. This study aims to look at the management education scenario in Kerala from a macro-perspective and examines the existing trends, major issues and present challenges facing the sector.

The study is driven by previously unexplored secondary data published by India's apex technical education regulator–All India Council for Technical Education (AICTE). Qualitative and quantitative assessments are assimilated from the organization, dissection and categorization of unit-level data.

Business schools (B-schools) in the state are facing acute distress in enrolments. There are intra-regional variations in institution count and occupancy rates. The vast majority of the institutions have no accreditation at all. The entire sector is facing a protracted decline.

The study has relied primarily on descriptive statistics considering a single discipline within the higher education sector in Kerala. Future studies should look at other disciplines (engineering, medicine) simultaneously. Use of statistical methods like panel data regression would be beneficial to find hidden trends in cross-sectional and longitudinal time-series data.

Management education in Kerala is facing an existential crisis. This has implications for the state's economic development. The paper creates strong imperatives for government policymaking to forestall the complete decline of the sector.

A highly literate state with advanced human development indices need not be a suitable location for building a knowledge-based economy. Government policy has strong implications for the development and sustenance of higher education. The relationship between government and business schools are symbiotic.

The paper maps the progression of B-schools from local to global. A typology of privately funded B-schools is proposed. The conceptual framework advanced in this study can contribute to further literature development. The suggested policy initiatives are applicable not only to Kerala but also to other tightly regulated markets.