Search results

IEEE 802.15.4 is a new standard uniquely designed for low‐rate wireless sensor networks (WSNs). It targets low data rate, low power consumption and low‐cost wireless networking, and offers device level wireless connectivity. The purpose of this paper is to propose a traffic adaptive power control algorithm for beacon relayed distributed WSNs.

A general coordinated sleeping algorithm and the traffic adaptive algorithm are combined in an IEEE 802.15.4 MAC protocol to achieve high‐energy efficiency and high performance at the same time.

By observing the sporadic traffic and beacon relaying characteristics of WSNs, the paper proposes a traffic‐adaptive IEEE 802.15.4 MAC with a coordinated sleeping algorithm. Based on various performance studies, it was found that the proposed algorithm can significantly improve power consumptions in wireless sensor networks.

The paper is of value in proposing a traffic adaptive power control algorithm showing highly efficient power consumptions in low‐traffic conditions as well as with an acceptable degree of adaptation to high‐traffic conditions. In delay performance, it shows longer delay performance compared with other schemes because of the beacon relay procedure while the proposed algorithm reduces the power consumptions dramatically.

A review of state‐of‐the‐art technology pertinent to tape automated bonding (for fine pitch, high I/O, high performance, high yield, high volume and high reliability) is presented. Emphasis is placed on a new understanding of the key elements (for example, tapes, bumps, inner lead bonding, testing and burn‐in on tape‐with‐chip, encapsulation, outer lead bonding, thermal management, reliability and rework) of this rapidly moving technology.

The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales, 2014).

This structured literature search covers papers published in 23 journals in IOM in the period 1990–2014.

The search yielded a sample of 208 unique papers with 275 results (one paper could refer to multiple cost management methods). The top 3 methods are modular design, component commonality, and product platforms, with 115 results (42%) together. In the MA literature, these three methods accounted for 29%, but target costing was the most researched cost management method by far (26%). Simulation is the most frequently used research method in the IOM literature, whereas this was averagely used in the MA literature; qualitative studies were the most frequently used research method in the MA literature, whereas this was averagely used in the IOM literature. We found a lot of papers presenting practical approaches or decision models as a further development of a particular cost management method, which is a clear difference from the MA literature.

This review focused on the same cost management methods, and future research could also consider other cost management methods which are likely to be more important in the IOM literature compared to the MA literature. Future research could also investigate innovative cost management practices in more detail through longitudinal case studies.

This review of research on methods for cost management published outside the MA literature provides an overview for MA researchers. It highlights key differences between both literatures in their research of the same cost management methods.

The purpose of this paper is to assess the efficacy of the Institute of Electrical and Electronics Engineers (IEEE) Xplore digital library search engine to return relevant materials on information visualization pedagogy literature and to recommend search strategies to assist the digital library academic readership improve the efficacy of their search tasks. Furthermore, the results are of interest to general readers using similar digital repositories.

An initial scoping review using EBSCO Discovery services returned the number and accessibility of sources and publications-based various Boolean searches. A revised search strategy focused the search to IEEE publications as the primary source of visualization research. A corpus of keywords were extracted from the 44 relevant articles and analyzed for relevance, keyword trends and contexts of use.

Keyword analysis results show visualization education research is confounded by several information retrieval issues: relevancy, incomplete taxonomy, non-standard lexicon, diverse disciplines and under-representation. Recommendations include: search strategies, alternative digital collections, a potential opportunity for research in information visualization pedagogy to address this gap in an emerging field and the need for more effective interactive tools to assist with keyword selection.

The study focused on the IEEE publications as the primary source of visualization research.

A repository of visualization education research that is easily findable and relevant benefits both faculty using information visualization in their teaching and academics whose work must be disseminated to the broadest audience. Strategic keyword selection, interactive keyword tools or more robust thesaurus will enable IEEE Xplore digital library users to optimize their interaction with the system. Furthermore, results suggest a need for more research in information visualization pedagogy.

This is the only study to uniquely assess the efficacy of the IEEE Xplore digital library database system to retrieve relevant visualization education literature based on keyword search.

In industrial distributed control environments for automation technology, Ethernet network based solutions are gaining prominence in the traditional fieldbus application areas with the promise of standardised solutions that can support real‐time operation to a resolution of less than 1 μm. However, there are no formal standards for a real‐time Industrial Ethernet. This paper looks at some of the emerging de facto solutions and describes a novel project where clusters of real‐time transducer networks are developed and the control is tightly synchronised using the IEEE 1588 clock synchronisation standard, realising a “Time‐triggered Ethernet” solution.

This bibliography is offered as a practical guide to published papers, conference proceedings papers and theses/dissertations on the finite element (FE) and boundary element (BE) applications in different fields of biomechanics between 1976 and 1991. The aim of this paper is to help the users of FE and BE techniques to get better value from a large collection of papers on the subjects. Categories in biomechanics included in this survey are: orthopaedic mechanics, dental mechanics, cardiovascular mechanics, soft tissue mechanics, biological flow, impact injury, and other fields of applications. More than 900 references are listed.

The purpose of this paper is to describe how emerging open standards are replacing traditional industrial networks. Current industrial Ethernet networks are not interoperable; thus, limiting the potential capabilities for the Industrial Internet of Things (IIoT). There is no forthcoming new generation fieldbus standard to integrate into the IIoT and Industry 4.0 revolution. The open platform communications unified architecture (OPC UA) time-sensitive networking (TSN) is a potential vendor-independent successor technology for the factory network. The OPC UA is a data exchange standard for industrial communication, and TSN is an Institute of Electrical and Electronics Engineers standard for Ethernet that supports real-time behaviour. The merging of these open standard solutions can facilitate cross-vendor interoperability for Industry 4.0 and IIoT products.

A brief review of the history of the fieldbus standards is presented, which highlights the shortcomings for current industrial systems in meeting converged traffic solutions. An experimental system for the OPC UA TSN is described to demonstrate an approach to developing a three-layer factory network system with an emphasis on the field layer.

From the multitude of existing industrial network schemes, there is a convergence pathway in solutions based on TSN Ethernet and OPC UA. At the field level, basic timing measurements in this paper show that the OPC UA TSN can meet the basic critical timing requirements for a fieldbus network.

This paper uniquely focuses on the specific fieldbus standards elements of industrial networks evolution and traces the developments from the early history to the current developing integration in IIoT context.

Ad hoc mobile networks are commonplace in every aspect of our everyday life. They become essential in many industries and have uses in logistics, science and the military. However, because they operate mostly in open spaces, they are exposed to a variety of dangers. The purpose of this study is to introduce a novel method for detecting the MAC layer misbehavior.

The proposed novel approach is based on exponential smoothing for throughput prediction to address this MAC layer misbehavior. The real and expected throughput are processed using an exponential smoothing algorithm to identify this attack, and if these metrics exhibit a trending pattern, an alarm is then sent.

The effect of the IEEE 802.11 MAC layer misbehavior on throughput was examined using the NS-2 network simulator, as well as the approval of our novel strategy. The authors have found that a smoothing factor value that is near to 0 provides a very accurate throughput forecast that takes into consideration the recent history of the updated values of the real value. As for the smoothing factor values that are near to 1, they are used to identify MAC layer misbehavior.

According to the authors’ modest knowledge, this new scheme has not been proposed in the state of the art for the detection of greedy behavior in mobile ad hoc networks.

Power quality issues highly affect the secure and economic operations of the power system. Although numerous methodologies are reported in the literature, flexible alternating current transmission system (FACTS) devices play a primary role. However, the FACTS devices require optimal location and sizing to perform the power quality enhancement effectively and in a cost efficient manner. This paper aims to attain the maximum power quality improvements in IEEE 30 and IEEE 57 test bus systems.

This paper contributes the adaptive whale optimization algorithm (AWOA) algorithm to solve the power quality issues under deregulated sector, which enhances available transfer capability, maintains voltage stability, minimizes loss and mitigates congestions.

Through the performance analysis, the convergence of the final fitness of AWOA algorithm is 5 per cent better than artificial bee colony (ABC), 3.79 per cent better than genetic algorithm (GA), 2,081 per cent better than particle swarm optimization (PSO) and fire fly (FF) and 2.56 per cent better than whale optimization algorithm (WOA) algorithms at 400 per cent load condition for IEEE 30 test bus system, and the fitness convergence of AWOA algorithm for IEEE 57 test bus system is 4.44, 4.86, 5.49, 7.52 and 9.66 per cent better than FF, ABC, WOA, PSO and GA, respectively.

This paper presents a technique for minimizing the power quality problems using AWOA algorithm. This is the first work to use WOA-based optimization for the power quality improvements.

This study aims to investigate the effects of different search and browse features in digital libraries (DLs) on task interactions, and what features would lead to poor user experience.

Three operational DLs: ACM, IEEE CS, and IEEE Xplore are used in this study. These three DLs present different features in their search and browsing designs. Two information‐seeking tasks are constructed: one search task and one browsing task. An experiment was conducted in a usability laboratory. Data from 35 participants are collected on a set of measures for user interactions.

The results demonstrate significant differences in many aspects of the user interactions between the three DLs. For both search and browse designs, the features that lead to poor user interactions are identified.

User interactions are affected by specific design features in DLs. Some of the design features may lead to poor user performance and should be improved. The study was limited mainly in the variety and the number of tasks used.

The study provided empirical evidence to the effects of interaction design features in DLs on user interactions and performance. The results contribute to our knowledge about DL designs in general and about the three operational DLs in particular.