Search results

1 – 10 of over 3000
Article
Publication date: 1 April 1972

I.S. Morton

IT MAY reasonably be asked “why should metalworking lubricants be considered as a class on their own?” Apart from convenience of classification, there are at least three good…

Abstract

IT MAY reasonably be asked “why should metalworking lubricants be considered as a class on their own?” Apart from convenience of classification, there are at least three good reasons for doing so:

Details

Industrial Lubrication and Tribology, vol. 24 no. 4
Type: Research Article
ISSN: 0036-8792

Book part
Publication date: 1 June 2011

W. Lee Hansen

This essay comments on what three eminent UW-Madison economists taught during the first half of the 20th century: John R. Commons (1862–1945), Selig Perlman (1886–1959), and…

Abstract

This essay comments on what three eminent UW-Madison economists taught during the first half of the 20th century: John R. Commons (1862–1945), Selig Perlman (1886–1959), and Martin Bronfenbrenner (1914–1997). What we know about what and how they taught varies. Interestingly, little or no effort has been made to preserve records that might inform us about what college and university economists taught their students and when and how new ideas and issues found their way into the teaching of economics. This thought first came to me in the years immediately following my joining the UW-Madison faculty in January 1965. I realized that many of us who gained experience in the policy arena while on leave in Washington DC during the 1960s incorporated that experience into our teaching at all course levels. This meant our students benefited from being on the cutting edge of emerging policy issues, such as poverty, negative income tax, human capital, military draft, and the all-volunteer army, the Kennedy round trade negotiations, tax policy, and cost–benefit analysis. We regularly incorporated these issues into our teaching, usually a half-dozen years before they made their way into the next edition of the textbooks and thus reached a wider student audience. Once incorporated into textbooks, these issues became much less interesting to teach because they had been boiled down to pedestrian textbook-style prose.

Details

Wisconsin, Labor, Income, and Institutions: Contributions from Commons and Bronfenbrenner
Type: Book
ISBN: 978-1-78052-010-0

Article
Publication date: 1 July 1963

EDWARD A. SMITH

FOREWORD COMMUNICATION OF IDEAS and data leads to dross‐pollination in research, which can be as important as the bench work itself. Channels of communication are now highly…

Abstract

FOREWORD COMMUNICATION OF IDEAS and data leads to dross‐pollination in research, which can be as important as the bench work itself. Channels of communication are now highly developed and the growth of specialized symposia and conferences points to the continuing development of this important aspect of research. Those who move about meetings regularly can acquire a balanced understanding of what is going on in the many corners where research is being prosecuted. Those who make a habit of combing, methodically, the technical press can also arrive at some idea of the direction and speed of the currents flowing through a particular subject. There are, however, many technical men who find themselves too busy in their management sphere to keep abreast with either meetings or the scientific journals.

Details

Industrial Lubrication and Tribology, vol. 15 no. 7
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 November 1959

I.S. Morton

CUTTING FLUIDS FACILITATE MACHINING OPERATIONS by virtue of their cooling, lubricating and other properties, and the fluid selected for a particular operation should have the best…

Abstract

CUTTING FLUIDS FACILITATE MACHINING OPERATIONS by virtue of their cooling, lubricating and other properties, and the fluid selected for a particular operation should have the best possible combination of properties to suit that case. In addition, the fluid must be correctly applied to enable its properties to be utilised fully.

Details

Industrial Lubrication and Tribology, vol. 11 no. 11
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 June 1972

I.S. Morton

WHEN WE turn from oil‐based to aqueous cutting fluids, we meet additional problems and require many more tests. Before dealing with these it should be remarked that they often…

Abstract

WHEN WE turn from oil‐based to aqueous cutting fluids, we meet additional problems and require many more tests. Before dealing with these it should be remarked that they often apply to fluids used in other operations, notably rolling and drawing, so that the following section is not restricted to cutting fluids only.

Details

Industrial Lubrication and Tribology, vol. 24 no. 6
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 February 1971

I.S. MORTON

“For a number of years there have been some machine shops in which a water‐base fluid has been used to the exclusion of all other aqueous cutting fluids. The advantages of such a…

Abstract

“For a number of years there have been some machine shops in which a water‐base fluid has been used to the exclusion of all other aqueous cutting fluids. The advantages of such a practice are most attractive; nevertheless, immense quantities of soluble oils continue to be sold”. Why is this? It is hoped that this article will stimulate discussion on this question.

Details

Industrial Lubrication and Tribology, vol. 23 no. 2
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 May 1973

I.S. Morton

Sendzimir mills have already been referred to as notable examples of cluster mills (p. 142 and Fig. 9). They exploit the advantages of well‐supported small diameter work rolls…

Abstract

Sendzimir mills have already been referred to as notable examples of cluster mills (p. 142 and Fig. 9). They exploit the advantages of well‐supported small diameter work rolls, making heavy reductions possible and producing very accurate cold rolled strip. The work rolls can be finished to produce the sheet surface quality required, can be very rapidly changed in service, and can be made of special very hard material such as tungsten carbide when minimum flattening is needed. Accordingly these mills are used for a great variety of materials — not only all types of steel (including stainless), copper and its alloys, and aluminium and its alloys, but titanium, tantalum, zirconium and even rarer or more intractable metals.

Details

Industrial Lubrication and Tribology, vol. 25 no. 5
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 May 1972

I.S. Morton

The attraction of shorter and less expensive methods of performance testing of cutting fluids, as just indicated with respect to broaching operations, applies to all operations in…

Abstract

The attraction of shorter and less expensive methods of performance testing of cutting fluids, as just indicated with respect to broaching operations, applies to all operations in some degree. Even established drilling or turning tests can soon involve expenditure of some thousands of pounds, and this may be difficult to justify where, as is often the case at present, any improvement may only give a modest commercial return.

Details

Industrial Lubrication and Tribology, vol. 24 no. 5
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 June 1974

I.S. Morton

DRAWING of metals occurs in innumerable ways, both hot and cold. Here, however, we are concerned only with the cold drawing operations used to form vast tonnages of steel, and…

Abstract

DRAWING of metals occurs in innumerable ways, both hot and cold. Here, however, we are concerned only with the cold drawing operations used to form vast tonnages of steel, and large quantities of non‐ferrous metals, as tube and wire, and for the forming of sheet metals (especially by deep drawing).

Details

Industrial Lubrication and Tribology, vol. 26 no. 6
Type: Research Article
ISSN: 0036-8792

Article
Publication date: 1 April 1973

I.S. Morton

AFTER cutting oils, rolling oils probably constitute the next largest overall offtake of metalworking oils although the proportions for any individual supplier may be very…

Abstract

AFTER cutting oils, rolling oils probably constitute the next largest overall offtake of metalworking oils although the proportions for any individual supplier may be very different, since much of the business is in the hands of specialists and some of the largest companies may do little.

Details

Industrial Lubrication and Tribology, vol. 25 no. 4
Type: Research Article
ISSN: 0036-8792

1 – 10 of over 3000