Search results

The cadaster goes through its fifth wave of updating, seeking agility and efficiency in cadastral registration. However, despite recent advances in remote sensors and the low cost of remotely piloted aircraft systems (RPAS), on-site visits are still used to complete the cadastral form. Thus, this work aims to employ techniques and methodologies for remote characterization of buildings for cadastral updating purposes, reducing the need to enter the parcels.

The research tools used were: RPAS and MMS (mobile mapping systems), making a three-dimensional model with RPAS data, and analyzing the results from these platforms. With the 3D model, it was possible to extract measurements and characteristics.

The analysis of the 3D model with the aerial photographs obtained better results in the characterization of the buildings and is the most indicated according to the study. There were difficulties in identifying some features, such as windows frames, and it was proposed to analyze the photographs without processing, to mitigate these identifications. The cadaster form was successfully completed using a combination of the techniques in this study.

This study brings a first proposal for the characterization of parcels for cadastral purposes, by remote sensing techniques, reducing the entry in the parcels for filling cadastral forms, with the evaluation of the proposal in the Brazilian case.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

This study reduces carbon emission in logistics distribution to realize the low-carbon site optimization for a cold chain logistics distribution center problem.

This study involves cooling, commodity damage and carbon emissions and establishes the site selection model of low-carbon cold chain logistics distribution center aiming at minimizing total cost, and grey wolf optimization algorithm is used to improve the artificial fish swarm algorithm to solve a cold chain logistics distribution center problem.

The optimization results and stability of the improved algorithm are significantly improved and compared with other intelligent algorithms. The result is confirmed to use the Beijing-Tianjin-Hebei region site selection. This study reduces composite cost of cold chain logistics and reduces damage to environment to provide a new idea for developing cold chain logistics.

This study contributes to propose an optimization model of low-carbon cold chain logistics site by considering various factors affecting cold chain products and converting carbon emissions into costs. Prior studies are lacking to take carbon emissions into account in the logistics process. The main trend of current economic development is low-carbon and the logistics distribution is an energy consumption and high carbon emissions.

This study aims to obtain methods to identify and find the place of damage, which is one of the topics that has always been discussed in structural engineering. The cost of repairing and rehabilitating massive bridges and buildings is very high, highlighting the need to monitor the structures continuously. One way to track the structure's health is to check the cracks in the concrete. Meanwhile, the current methods of concrete crack detection have complex and heavy calculations.

This paper presents a new lightweight architecture based on deep learning for crack classification in concrete structures. The proposed architecture was identified and classified in less time and with higher accuracy than other traditional and valid architectures in crack detection. This paper used a standard dataset to detect two-class and multi-class cracks.

Results show that two images were recognized with 99.53% accuracy based on the proposed method, and multi-class images were classified with 91% accuracy. The low execution time of the proposed architecture compared to other valid architectures in deep learning on the same hardware platform. The use of Adam's optimizer in this research had better performance than other optimizers.

This paper presents a framework based on a lightweight convolutional neural network for nondestructive monitoring of structural health to optimize the calculation costs and reduce execution time in processing.

Aim to the limitations of grey relational analysis of interval grey number, based on the generalized greyness of interval grey number, this paper tries to construct a grey angle cosine relational degree model from the perspective of proximity and similarity.

Firstly, the algorithms of the generalized greyness of interval grey number and interval grey number vector are given, and its properties are analyzed. Then, based on the grey relational theory, the grey angle cosine relational model is proposed based on the generalized greyness of interval grey number, and the relationship between the classical cosine similarity model and the grey angle cosine relational model is analyzed. Finally, the validity of the model in this paper is illustrated by the calculation examples and an application example of related factor analysis of maize yield.

The results show that the grey angle cosine relational degree model has strict theoretical basis, convenient calculation and is easy to program, which can not only fully utilize the information of interval grey numbers but also overcome the shortcomings of greyness relational degree model. The grey angle cosine relational degree is an extended form of cosine similarity degree of real numbers. The calculation examples and the related factor analysis of maize yield show that the model proposed in this paper is feasible and valid.

The research results not only further enrich the grey system theory and method but also provide a basis for the grey relational analysis of the sequences in which the interval grey numbers coexist with the real numbers.

The paper succeeds in realizing the algorithms of the generalized greyness of interval grey number and interval grey number vector, and the grey angle cosine relational degree, which provide a new method for grey relational analysis.

Bitcoin (BTC) is significantly correlated with global financial assets such as crude oil, gold and the US dollar. BTC and global financial assets have become more closely related, particularly since the outbreak of the COVID-19 pandemic. The purpose of this paper is to formulate BTC investment decisions with the aid of global financial assets.

This study suggests a more accurate prediction model for BTC trading by combining the dynamic conditional correlation generalized autoregressive conditional heteroscedasticity (DCC-GARCH) model with the artificial neural network (ANN). The DCC-GARCH model offers significant input information, including dynamic correlation and volatility, to the ANN. To analyze the data effectively, the study divides it into two periods: before and during the COVID-19 outbreak. Each period is then further divided into a training set and a prediction set.

The empirical results show that BTC and gold have the highest positive correlation compared with crude oil and the USD, while BTC and the USD have a dynamic and negative correlation. More importantly, the ANN-DCC-GARCH model had a cumulative return of 318% before the outbreak of the COVID-19 pandemic and can decrease loss by 50% during the COVID-19 pandemic. Moreover, the risk-averse can turn a loss into a profit of about 20% in 2022.

The empirical analysis provides technical support and decision-making reference for investors and financial institutions to make investment decisions on BTC.

Human actions on natural ecosystems have not only jeopardized human well-being but also threatened the existence of other species. On the other hand, the benefits resulting from a greater integration between the logic of nature and human occupations have been seen as motivating factors for the prevention and mitigation of environmental impacts in landscape planning, since it provides human well-being through the grant of resources, regulation of the environment and socio-cultural services called ecosystem services. This article highlights the relevance of using ecosystem integrity indicators related to the functioning of ecological support processes for landscape planning.

The research used the photosynthetic performance of vegetation through carbon fluxes in the landscape, defining areas where different approaches to green infrastructure can be applied, gaining over the majority of work in this area, in which low degrees of objectivity on measurement and consequent ecological recovery still prevail. Thus, using the conceptual support of restoration ecology and remote sensing, the work identified different vegetation performances in relation to the supporting ecological processes using the multispectral CO₂flux index, linked to the carbon flux to identify the photosynthetic effectiveness of the vegetation and the Topographic Wetness Index (TWI).

With a study in the Distrito Federal (DF), the results of the different performances of vegetation for ecological support, through electromagnetic signatures and associated vegetation formations, allowed for the identification of hotspots of greater integrity that indicate multifunctional areas to be preserved and critical areas that deserve planning actions using green infrastructure techniques for their restoration and integration into the landscape.

This approach could be the initial step towards establishing clear and assertive criteria for selecting areas with greater potential for the development of supporting ecological processes in the territorial mosaic.