Search results

The purpose of this study is to examine the dynamic performance of an orifice-compensated three-pad hydrostatic squeeze film damper.

A numerical model has been developed and presented to study the effect of eccentricity ratio and pressure ratio on the static and dynamic characteristics of an orifice-compensated three-pad hydrostatic squeeze film damper. It is assumed that the fluid flow is incompressible, laminar, isothermal and steady-state. The finite difference method has been used to solve Reynolds equation governing the lubricant flow in film thickness of hydrostatic bearing. The numerical results obtained are discussed, analyzed and compared between three- and four-lobe hydrostatic journal bearings available in the literature.

It was found that the influence of eccentricity ratio on dynamic characteristics of an orifice-compensated three-pad hydrostatic squeeze film damper appears to be essentially controlled by the concentric pressure ratio. It was also found that the three-pad hydrostatic squeeze film damper has higher stiffness than three and four-lobe hydrostatic journal bearings.

In fact, the results obtained show that this type of hydrostatic squeeze film damper provides hydrostatic designers a new bearing configuration suitable to control rotor vibrations.

This paper aims to propose a new hydrostatic squeeze film damper compensated with electrorheological valve restrictors to control the nonlinear dynamic behavior of a rigid rotor caused by high unbalance eccentricity ratio. To investigate the effect of electrorheological valve restrictors on the dynamic behavior of a rigid rotor, a nonlinear model is developed and presented.

The nonlinear results are compared with those obtained from a linear approach. The results show good agreement between the linear and nonlinear methods when the unbalanced force is small. The effects of unbalance eccentricity ratio and electric field on the vibration response and the bearing transmitted force are investigated using the nonlinear models.

The results of simulation performed that the harmonics generated by high unbalance eccentricities can be reduced by using hydrostatic squeeze film damper compensated with electrorheological valve restrictors.

The numerical results demonstrate that this type of smart hydrostatic squeeze film damper provides to hydrostatic designers a new bearing configuration suitable to control rotor vibrations and bearing transmitted forces, especially for high speed.

The purpose of this research is to study the dynamic behavior of hydrostatic squeeze film dampers made of four hydrostatic pads, fed through four capillary restrictors with micropolar lubricant.

The modified version of Reynolds equation is solved numerically by the finite differences and the Gauss–Seidel methods to determine the pressure field generated on the hydrostatic bearing flat pads. In the first step, the effects of the pad dimension ratios on the stiffness and damping coefficients are investigated. In the second step, the damping factor is evaluated with respect to the micropolar properties.

The analysis revealed that the hydrostatic squeeze film dampers lubricated with micropolar lubricants produces the maximum damping factor for characteristic length of micropolar lubricant less than 5, while the same bearing operating with Newtonian lubricants reaches its maximum damping factor at eccentricity ratios larger than 0.4.

The results obtained show that the effects of micropolar lubricants on the dynamic performances are predominantly affected by the pad geometry and eccentricity ratio.

The purpose of this paper is to study the influence of different flow regimes on the dynamic characteristics of four-pad hydrostatic squeeze film dampers (SFDs) loaded between pads.

A numerical model based on Constantinescu’s turbulent lubrication theory using the finite difference method has been developed and presented to study the effect of eccentricity ratio on the performance characteristics of four-pad hydrostatic SFDs under different flow regimes.

It was found that the influence of turbulent flow on the dimensionless damping of four-pad hydrostatic SFDs appears to be essentially controlled by the eccentricity ratio. It was also found that the laminar flow presents higher values of load capacity compared to bearings operating under turbulent flow conditions.

In fact, the results obtained show that the journal bearing performances are significantly influenced by the turbulent flow regime. The study is expected to be useful to bearing designers.

This study aims to present a novel hydrostatic squeeze film-metal mesh journal bearing (HS-MMJB), which uses both hydrostatic squeeze film damper (HSFD) and metal mesh damper (MMD), to suppress the vibration of rotor-bearing systems.

The lubrication equations were introduced to calculate the dynamic characteristics of HS-MMJB, and the response analyses of rotor systems were carried out. Experiments were conducted to study the vibration reduction of a rotor system with HS-MMJB. In addition, experiments for different oil supply pressures in the HS-MMJB were conducted.

The theoretical and experimental results show that the HS-MMJB exhibits excellent damping and vibration attenuation characteristics. Moreover, the stability of the rotor system can be improved by controlling the oil supply pressure.

There is a dearth of research on vibration characteristics of rotor system support by journal bearing combining HSFD and MMD. Moreover, the active oil pressure control is implemented to improve the stability of rotor system.

The porous bearings are commonly used in slider thrust bearings owing to their self-lubricating properties and cost effectiveness as compared to conventional hydrodynamic bearings. The purpose of this paper is to numerically investigate usefulness of porous layer in hydrostatic thrust bearing operating with magnetic fluid. The effect of magnetic field and permeability has been analysed on steady-state (film pressure, film reaction and lubricant flow rate) and rotor-dynamic (stiffness and damping) parameters of bearing.

Finite element approach is used to obtain numerical solution of flow governing equations (Magneto-hydrodynamics Reynolds equation, Darcy law and capillary equation) for computing abovementioned performance indices. Finite element method formulation converts elliptical Reynolds equation into set of algebraic equation that are solved using Gauss–Seidel method.

It has been reported that porosity has limited but adverse effects on performance parameters of bearing. The adverse effects of porosity can be minimized by using a circular pocket for achieving better steady-state response and an annular/elliptical pocket, for having better rotor-dynamic response. The use of magnetic fluid is found to be substantially enhancing the fluid film reaction (53%) and damping parameters (55%).

The present work recommends use of circular pocket for achieving better steady-state performance indices. However, annular and elliptical pockets should be preferred, when design criteria for the bearing are better rotor-dynamic performance.

This study deals with influence of magnetic fluid, porosity and pocket shape on rotor-dynamic performance of externally pressurized thrust bearing.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2020-0289/

An electrorheological (ER) fluid comprises dielectric particles suspended in an insulating viscous medium. ER lubricants are considered smart lubricants. They have been applied in hydraulic valves, power transmission devices and damping systems. The purpose of this study is to investigate the performance of hydrostatic thrust bearing operating with ER lubricant.

Reynold’s equation was used to model the flow of the ER lubricant in the bearing. The continuous Bingham model was used to express the viscosity of the ER lubricant as a function of yielding stress, applied electric field and shear strain rate. The Reynolds equation is solved using the finite element method (weighted residual approach) to compute the film pressure as a primary variable and the lubricant flow rate, load-carrying capacity, stiffness and damping parameters as associated performance indices.

The effects of the pocket shape, compensating elements and ER lubricant on the bearing performance were investigated. The application of ER lubricant significantly enhanced the load-carrying capacity (48.2%), stiffness (49.8%) and damping (4.95%) of the bearings. Circular and triangular pocket bearings with constant-flow valves have been reported to provide better steady-state and rotor-dynamic performances, respectively.

This study presents the effect of an ER lubricant on the rotor-dynamic performance of hydrostatic thrust bearings with different pocket shapes.

Every high speed machine, demanding high level of perfection, can operate successfully through a precise design of bearings. Such a design can be formulated after carefully studying both static and dynamic characteristics of the journal bearing. The present paper aims to describe the study of static and dynamic performance of a hole‐entry hybrid journal bearing system compensated with capillary restrictor by considering the combined influence of thermal effects and non‐Newtonian behavior of the lubricant.

The variation of the viscosity due to the non‐Newtonian behavior of the lubricant and temperature rise is considered in the study. The numerical solution of the generalized Reynold's, equation governing the flow of the lubricant having variable viscosity along with the energy and heat conduction equations is obtained using finite element method. The non‐Newtonian lubricant has been assumed to follow the cubic shear stress law. The study includes performance of a double row symmetric hole entry hybrid journal bearing configuration containing 12 holes per row.

The results indicate that change in viscosity of lubricant affects the bearing design parameters.

The paper shows that accurate theoretical modeling of the bearing is an effective tool for the selection of design parameter such as bearing land width ratio (a_b), restrictor design parameter (C_s2), and non‐linearity factor (K).

This paper aims to describe the theoretical study concerning the effect of non‐linear behavior of the lubricant on the performance of symmetric constant flow valve compensated hole‐entry hybrid journal bearing. The bearing performance characteristics have been computed for various values of non‐linearity factor, land width ratio, aspect ratio and external load.

The analysis considers the generalized Reynolds equation governing the flow of lubricant having variable viscosity in the clearance space and equation of flow of lubricant through constant flow valve restrictor. The non‐Newtonian lubricant is assumed to follow the cubic shear stress law.

The study indicates that for generation of accurate bearing characteristics data, the inclusion of non‐linear effects of lubricant in the analysis is essential.

The performance characteristics in terms of minimum fluid‐film thickness, fluid‐film stiffness and damping coefficients, critical mass and threshold speed for a wide range of values of the non‐linearity factor and external load are presented. The results presented are expected to be quite useful to bearing designers.

This paper aims to investigate the effect of plugging of holes on the static performance characteristics of a constant flow valve compensated hole‐entry hybrid journal bearing system operating with Newtonian and non‐Newtonian lubricants. The analysis considers the generalized Reynolds equation governing the flow of lubricant having variable viscosity in the clearance space and equation of flow of lubricant through constant flow valve restrictor. The non‐Newtonian lubricant is assumed to follow the power law. The performance characteristics are computed for the two values of power law index (n=1.0 and 0.566). The computed results indicate that the blockage of holes during operation will not be the likely causes for the imminent failure of a well‐designed non‐recessed hole‐entry hybrid journal bearing.

Finite element method has been used to solve generalized Reynolds equation governing the flow of lubricant having variable viscosity in the clearance space and equation of flow of lubricant through constant flow valve restrictor.

The computed results indicate that the blockage of holes during operation will not be the likely causes for the imminent failure of a well‐designed non‐recessed hole‐entry hybrid journal bearing. The bearing configuration with plugged holes provides sufficient fluid film thickness and low power requirement as less lubricant is required to be pumped in the bearing.

To the best of the author's knowledge, no study which considers the influence of plugging of holes on the static performance characteristics of a constant flow valve compensated hole‐entry hybrid journal bearing system operating with Newtonian and non‐Newtonian lubricant is yet available in the literature.