Search results

The purpose of this paper is to study the influence of structural parameters of oil groove (such as central angle number, depth and so on) on pressure, flow, load capacity and transmitted torque between friction pairs of hydro-viscous clutch.

According to the working process of friction pairs of hydro-viscous clutch, mathematical models of hydrodynamic load capacity and torque transmitted by the oil film were built based on viscosity-temperature property. Then analytical solutions of pressure, flow, load capacity and transmitted torque were obtained; effects of central angle of oil groove zone and friction contact zone, oil film thickness, number of oil grooves on pressure, flow, load capacity and torque were studied theoretically.

The research found that the central angle of oil groove zone, number of oil grooves and oil groove depth have similar effects on flow, which means that with the increase of central angle, number or depth of oil grooves, the flow also increases; pressure in friction contact zone and oil groove zone drops along radial direction, whereas its value in oil groove zone is higher. With the increase of the central angle of oil groove zone, pressure in friction contact zone and friction contact zone rises, and the load capacity increases, whereas the transmitted torque drops. Number of oil grooves has little effect on load capacity. When the oil film thickness increases, its flow increases accordingly, whereas the pressure, load capacity and transmitted torque drops. Meanwhile, the transmitted torque decreases with the increase of number of oil grooves, whereas the oil groove depth nearly has no effects on transmitted torque.

In this paper, mathematical models of hydrodynamic load capacity and torque transmitted by oil film were built based on viscosity-temperature property in the working process of hydro-viscous clutch, and their analytical solutions were obtained; effects of structural parameters of oil groove on transmission characteristics of hydro-viscous clutch based on viscosity-temperature property were revealed. The research results are of great value to the theory development of hydro-viscous drive technology, the design of high-power hydro-viscous clutch and relative control strategy.

Hydro-viscous drive (HVD) clutches are widely used in equipment requiring soft start, such as fans and pumps, to transmit torque and adjust speed by changing the gap distance between friction pairs. This paper aims to propose a novel two-parameter evaluation method for HVD during the mixed lubrication stage. The objective is to develop an effective model that establishes the relationship between these parameters and the actual surface topography.

In the presented methods, the fractal features of the real manufacturing surface are calculated based on the power spectrum function by the ultra-depth three-dimensional microscope. After that, the hybrid friction model of the friction plate is established based on mixed elasto-hydrodynamic lubrication theory, boundary friction model and fractal theory. Then the torque and load bearing characteristics of the clutch are obtained, and the influences of the surface fractal features are investigated and discussed. Finally, the Weierstrass–Mandelbrot function is adopted for the surface topography characterization and evaluation.

The results indicate that the proposed method exhibits good accuracy, while the speed difference between the friction pair exceeds 2,500 rpm. It is concluded that this paper proposed a way to evaluate the torque and loading capacity of HVD considering the real manufacturing surface topography and is helpful for surface optimization.

The originality and value of this study lie in its development of a novel torque and load bearing capacity evaluation method for HVD in mixed lubrication stage, considering manufacturing surface topography and describing the real manufacturing surface.

Friction pairs of the hydro-viscous drive speed regulating start device should be designed based on the rated torque. To obtain design basis of the rated torque of the hydro-viscous drive speed regulating start device, studies on effect of torque ratio (a ratio of the load torque to the rated torque) on speed regulating start were carried out theoretically and experimentally.

Under different torque ratio, the modified Reynolds, the thermal energy and the viscosity-temperature equations were solved simultaneously by using finite element method to reveal variation laws of the oil film load capacity and torque transmission during the starting process. Then, speed regulating start experiments were carried out to study the following performance of the output speed.

The results show that oil film thickness decreases with the increase of the torque ratio; when oil film thickness is less than 0.05 mm, oil film temperature increases rapidly with the decrease of oil film thickness, which eventually deteriorates performance of the speed regulating start; when the torque ratio decreases to about 0.3, output speed shows a better following performance.

It indicates that, to acquire a better speed regulating start, the rated torque of the hydro-viscous drive speed regulating start device should not be less than three times of the load torque. Achievements of this work provide theoretical basis for optimal design of the friction pairs of the hydro-viscous drive speed regulating start device.

The purpose of this paper is to study the working characteristics of hydro-viscous clutch at high rotational speeds and obtain the trend of flow field variation of oil film.

The FLUENT simulation model of the oil film between the friction disks is built. The effect of variation of working parameters such as input rotational speed, oil flow rate and film thickness on two-phase flow regime and transmission torque is studied by using the volume of fluid model.

The results show that the higher the rotational speed, the severer the cavitation is. In addition, the two-phase flow region makes the coverage of oil film over the friction pairs’ surface reduce, which results in a decrease in transmission torque for the hydro-viscous clutch.

These simulation results are of interest for the study of hydro-viscous drive and its applications. This study can also provide a theoretical basis for power transmission mechanism of oil film by considering the existence of a two-phase flow regime consisting of oil and air.

The purpose of this paper is to study the influence of different cross-sectional shapes (rectangular, trapezoidal, oval and triangular) and layout forms of oil grooves (radial, circumferential, inclined, compound, helical and double-helical), and determine the optimal section shape and layout form of oil grooves on the temperature field.

Heat conduction theory model was established based on startup characteristics and friction heat principle of hydro-viscous clutch (HVC), and then the theoretical expression of angular velocity of the friction pair and control pressure were deduced, and the heat flux and its distribution on friction disk and separator disk were calculated. Finally, the finite element method was used to solve the temperature field of the friction pair.

The studies show that the circumferential oil groove got the highest temperature, and on the surface of all other structures, hot spots appear with different sizes and temperatures, and the maximum temperature difference in the friction zone is about 3°C, and in the oil groove zone is about 16°C, wherein the compound oil groove has the lowest average temperature. This research shows that the compound oil groove with rectangular cross-section is the best choice for the friction pair.

In this paper, it was found that the compound oil groove with rectangular cross-section is the best choice for the friction pair, and it provided a favorable theory reference and technical support for the structural design of the friction pair and optimized design of the high-power HVC.

The purpose of this paper is to study the influences of the oil film thickness between the friction pairs, the rotational speed of the active and passive friction disks and the inlet pressure of the lubricant on the transmission efficiency.

A mathematical model of transmission efficiency was established, and the efficiency of transmission was studied by means of numerical analysis.

The results demonstrate that the transmission efficiency decreases with the thickness of the oil film increases. When the thickness of oil film d = 0.1 mm, the relationship between transmission efficiency and transmission ratio is linear, that is, with the transmission ratio increases, the transmission efficiency also increases which does not change with the inlet pressure changes. However, when d = 0.1 mm, their relationship is non-linear; the efficiency increases first and then decreases as the transmission ratio increases, but decreases as the inlet pressure increases.

The authors obtained a rule is that increasing the rotational speed and reducing the inlet pressure of the lubricating oil can improve the transmission efficiency. This study can provide a theoretical basis for power transmission designing of hydro-viscous clutch.

The purpose of this paper is to study the temperature characteristics of hydro-viscous clutch with different structure of friction disks and obtain the distribution of film temperature.

The mathematical model of oil film between friction disks with radial grooves is established. Based on the flow rate equation, the temperature rise equation of oil film is deduced. Considering two-phase flow, the temperature distribution in the oil shear stage and the effects of the ratio of inner radius to outer radius on film temperature rise is studied by using computational fluid dynamics (CFD) technology.

The results show that when input speed is constant, the increase in the ratio of inner to outer radius leads to an increase in the peak temperature and the decrease in the ratio results in a larger increasing rate of temperature.

These results are of interest for the study of hydro-viscous drive and its applications. This study can also provide a theoretical basis for the mechanism of temperature rise by considering the effect of two-phase flow.

The purpose of this study is to investigate the flexible dynamic characteristics about hydro-viscous drive providing meaningful insights into the credible speed-regulating behavior during the soft-start.

A comprehensive dynamic transmission model is proposed to investigate the effects of key parameters on the dynamic characteristics. To achieve a trade-off between the transmission efficiency and time proportion of hydrodynamic and mixed lubrication, a multi-objective optimization of friction pair system by genetic algorithm is presented to obtain the optimal combination of design parameters.

Decreasing the engagement pressure or the ratio of inner and outer radius, increasing the lubricating oil viscosity or the outer radius will result in the increase of time proportion of hydrodynamic and mixed lubrication, as well as the transmission efficiency and its maximum value. After optimization, main dynamic parameters including the oil film thickness, angular velocity of the driven disk, viscous torque and total torque show remarkable flexible transmission characteristics.

Both the dynamic transmission model and multi-objective optimization model are established to analyze the effects of main design parameters on the dynamic characteristics of hydro-viscous flexible drive.

The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulating and soft starting. It is an efficient method to save energy and reduce consumption. This study aims to analyze the influencing factors of oil film shear torque accurately.

The shear torque calculation model of double arc oil groove friction pairs was established. The influence of groove structure parameters on shear torque was analyzed. The interaction between viscosity temperature and shear torque was considered. Meanwhile, the equivalent radius was calculated when the rupture of oil film appeared. Finally, the test rig of torque characteristics was set up. The variance of shear torque with the input rotation speed under different oil film thickness, different oil temperature, and different flow rate was seen.

The results show that the shear torque increases with the growth of rotation speed. However, the increase of torque is quite gradual because of the effect of the change of viscosity, which is caused by the rise of temperature. The shear torque increases with the decrease of thickness, the increase of inlet flow rate, and the decrease of inlet oil temperature. Meanwhile, when the feeding flow rate is less than the theoretical, the oil film gets ruptured and the shear torque decreases sharply.

The influence on shear torque during full film shear stage in HVD can be achieved much more accurately through both experimental research and theoretical modeling in which groove parameters, influence of temperature, and oil film rupture are considered. Therefore, the shear torque of HVD can be predicted by theoretical model and experimental research in full film shear stage.

In this paper, a kind of an oil groove structure which could improve the transmission torque of an oil film was designed, i.e. the width and depth of oil groove gradually decrease with the increase in the radius.

Effects of the structural parameters of the oil groove on the hydro-viscous drive (HVD) characteristics with variable rotational speed were investigated by means of numerical calculation.

Research results show that with the decrease of the width and depth of the oil groove at the outer diameter, transmission torque increases, while the temperature is almost unchanged. Keeping the effective area unchanged, comparing the transmitted torque under the oil groove angle θ₂ = 0.5° and θ₂ = 4.5°, the former was almost 200 per cent of the latter; the torque transmitted with h₂ = 0.05 mm was almost 150 per cent of that with h₂ = 0.2 mm.

In this paper, the authors analyze the friction surface of the friction plate between the oil groove, oil distribution and oil film transfer torque from the oil groove structure parameters and found methods to improve the transmission torque. For the first time, the influence of the structural parameters of oil groove on the characteristics of HVD was studied under the condition of variable rotational speed, and a better method to improve the transmission torque was proposed.