Search results

Realistic data bank of aerodynamic and stability derivatives is still missing for hybrid buoyant aerial vehicles. Such vehicles take-off and land similar to an aircraft with their partial weight balanced by the aerostatic lift. The purpose of this paper is to use wind tunnel testing for a better understanding of the aerodynamic and static stability behavior of such vehicles.

The effect of wing on the aerodynamic and static stability characteristics of a clean configuration hybrid buoyant is analyzed. The free stream velocity is 20 m/s, and ranges of angle of attack and side slip angle are from −8° to 12° and ±16°, respectively. Data are corrected to account for the effect of strut interference and zero load condition. The maximum blockage of the model with respect to the cross-section area of the test section is about 2.7 per cent.

A hybrid model manufactured by using wood and metal is an optimum solution with less number of parts. The vehicle is statically, longitudinally and directionally stable. Wings designed to fulfill the partial requirement of lift contribute significantly to counter the huge moment generated by the voluminous hull for centre of gravity location ahead of the leading edge of the wing.

There are number of manufacturing constraints for scaling down a model of a hybrid buoyant aerial vehicle configuration. Specially, the thickness of the wing limits the testing envelop of angle of attack and free stream velocity.

The data presented here are a preliminary guide for further work on larger size models. The data may also be used to build and perform flight tests on small full-scale instrumented models and to obtain flight dynamics data.

The estimated aerodynamic and stability derivatives and slopes can be utilized in future for multidisciplinary design.

This paper deals with the estimation of the necessary masses of propulsion components for multirotor UAS. Originally, within the design process of multirotors, this is an iterative problem, as the propulsion masses contribute to the total takeoff mass. Hence, they influence themselves and cannot be directly calculated. The paper aims to estimate the needed propulsion masses with respect to the requested thrust because of payload, airframe weight and drag forces and with respect to the requested flight time.

Analogue to the well-established design synthesis of airplanes, statistical data of existing electrical motors, propellers and rechargeable batteries are evaluated and analyzed. Applying Rankine and Froude’s momentum theory and a generic model for electro motor efficiency factors on the statistical performance data provides correlations between requested performance and, therefore, needed propulsion masses. These correlations are evaluated and analyzed in the scope of buoyant-vertical-thrusted hybrid UAS.

This paper provides a generic mathematical propulsion model. For given payloads, airframe structure weights and a requested flight time, appropriate motor, propeller and battery masses can be modelled that will provide appropriate thrust to lift payload, airframe and the propulsion unit itself over a requested flight time.

The model takes into account a number of motors of four and is valid for the category of nano and small UAS.

The presented propulsion model enables a full numerical design process for vertical thrusted UAS. Hence, it is the precondition for design optimization and more efficient UAS.

The propulsion model is unique and it is valid for pure multirotor as well as for hybrid UAS too.

Being extensively used in metallurgy, rotating magnetic fields are also becoming increasingly interesting for application in crystal growth, where they are intended to act by stabilizing the melt flow. For this purpose, it is important to understand the basic interactions of the magnetically induced flow and other flow components like time‐dependent buoyant convection. So a three‐dimensional finite volume method was developed in order to numerically study the effect of a rotating magnetic field on convection in a cylindrical melt volume. The equations of mass, momentum, and heat transport are solved together with the potential equations describing the electromagnetic field. The numerical computation of the Lorenz force distribution is validated by comparison with an analytical solution. The effects of magnetic field parameters on the temperature distributions and the flow patterns in the considered configurations are analysed.

This paper aims to examine the hybrid nanofluid flow towards a stagnation point on an exponentially stretching/shrinking vertical sheet with buoyancy effects.

Here, the authors consider copper (Cu) and alumina (Al₂O₃) as hybrid nanoparticles while water as the base fluid. The governing equations are reduced to the similarity equations using similarity transformations. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions.

The authors found that the heat transfer rate is greater for Al₂O₃-Cu/water hybrid nanofluid if compared to Cu/water nanofluid. Besides, the non-uniqueness of the solutions is observed for certain physical parameters. The authors also notice that the bifurcation of the solutions occurs in the downward buoyant force and the shrinking regions. In addition, the first solution of the skin friction and heat transfer coefficients increase with the added hybrid nanoparticles and the mixed convection parameter. The temporal stability analysis shows that one of the solutions is stable as time evolves.

The present work is dealing with the problem of a mixed convection flow of a hybrid nanofluid towards a stagnation point on an exponentially stretching/shrinking vertical sheet, with the buoyancy effects is taken into consideration. The authors show that two solutions are obtained for a single value of parameter for both stretching and shrinking cases, as well as for both buoyancy aiding and opposing flows. A temporal stability analysis then shows that only one of the solutions is stable and physically reliable as time evolves.

This study aims to investigate the impact of different heater geometries (flat, rectangular, semi-elliptical and triangular) on hybrid nanofluidic (Cu–Al₂O₃–H₂O) convection in novel umbrella-shaped porous thermal systems. The system is top-cooled, and the identical heater surfaces are provided centrally at the bottom to identify the most enhanced configuration.

The thermal-fluid flow analysis is performed using a finite volume-based indigenous code, solving the nonlinear coupled transport equations with the Darcy number (10^–5 ≤ Da ≤ 10^–1), modified Rayleigh number (10 ≤ Ra_m ≤ 10⁴) and Hartmann number (0 ≤ Ha ≤ 70) as the dimensionless operating parameters. The semi-implicit method for pressure linked equations algorithm is used to solve the discretized transport equations over staggered nonuniform meshes.

The study demonstrates that altering the heater surface geometry improves heat transfer by up to 224% compared with a flat surface configuration. The triangular-shaped heating surface is the most effective in enhancing both heat transfer and flow strength. In general, flow strength and heat transfer increase with rising Ra_m and decrease with increasing Da and Ha. The study also proposes a mathematical correlation to predict thermal characteristics by integrating all geometric and flow control variables.

The present concept can be extended to further explore thermal performance with different curvature effects, orientations, boundary conditions, etc., numerically or experimentally.

The present geometry configurations can be applied in various engineering applications such as heat exchangers, crystallization, micro-electronic devices, energy storage systems, mixing processes, food processing and different biomedical systems (blood flow control, cancer treatment, medical equipment, targeted drug delivery, etc.).

This investigation contributes by exploring the effect of various geometric shapes of the heated bottom on the hydromagnetic convection of Cu–Al₂O₃–H₂O hybrid nanofluid flow in a complex umbrella-shaped porous thermal system involving curved surfaces and multiphysical conditions.

The purpose of this study is to provide that porous media and viscous dissipation are crucial considerations when working with hybrid nanofluids in various applications.Recent years have witnessed significant progress in optimizing these fluids for enhanced heat transfer within porous (Darcy–Forchheimer) structures, offering promising solutions for various industries seeking improved thermalmanagement and energy efficiency.

The first step is to transform the original partial differential equations into a system of first-order ordinary differential equations (ODEs). The fourth-order Runge–Kutta method is chosen for its accuracy in solving ODEs. The present study investigates the free convective boundary layer flow of hybrid nanofluids over a moving thin inclined needle with the slip flow brought about by inclined Lorentz force and Darcy–Forchheimer porous matrix, viscous dissipation.

It is found that slip conditions (velocity and Thermal) exist for a range of the natural convection boundary layer flow. In the hybrid nanofluid flow, which consists of Al₂O₃ and Fe₃O₄ are nanoparticles, H₂O − C₂H₆O₂ (50:50) are considered as the base fluid. The consequence of the governing parameter on the momentum and temperature profile distribution is graphically depicted. The range of the variables is 1 ≤ M ≤ 4, 1 ≤ d ≤ 2.5, 1 ≤ δ ≤ 4, 1 ≤ Fr ≤ 7, 1 ≤ Kr ≤ 7 and 0.5≤λ ≤ 3.5. The Nusselt number and skin friction factors are used to calculate the numerical values of various parameters, which are displayed in Table 4. These analyses elucidate that upsurges in the value of the Fr noticeably diminish the momentum and temperature. It is investigated to see if the contemporary results are in outstanding promise with the outcomes reported in earlier works.

The results can be very helpful to improve the energy efficiency of thermal systems.

The hybrid nanofluids in heat transfer have the potential to improve the energy efficiency and performance of a wide range of systems.

This study proposes that in the combined effects of hybrid nanofluid properties, the inclined Lorentz force, the Darcy–Forchheimer model for porous media and viscous dissipation on the boundary layer flow of a conducting fluid over a moving thin inclined needle. Assessing the potential practical applications of the hybrid nanofluids in inclined needles, this could involve areas such as biomedical engineering, drug delivery systems or microfluidic devices. In future should explore the benefits and limitations of using hybrid nanofluids in these applications.

This paper aims to examine the thermal transmission and entropy generation of hybrid nanofluid filled containers with solid body inside. The solid body is seen as being both isothermal and capable of producing heat. A time-dependent non-linear partial differential equation is used to represent the transfer of heat through a solid body. The current study’s objective is to investigate the key properties of nanoparticles, external forces and particular attention paid to the impact of hybrid nanoparticles on entropy formation. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates. Hybrid nanofluid has been proven to have useful qualities, making it an attractive coolant for an electrical device. The findings would help scientists and engineers better understand how to analyse convective heat transmission and how to forecast better heat transfer rates in cutting-edge technological systems used in industries such as heat transportation, power generation, chemical production and passive cooling systems for electronic devices.

Thermal transmission and entropy generation of hybrid nanofluid are analysed within the enclosure. The domain of interest is a square chamber of size L, including a square solid block. The solid body is considered to be isothermal and generating heat. The flow driven by temperature gradient in the cavity is two-dimensional. The governing equations, formulated in dimensionless primitive variables with corresponding initial and boundary conditions, are worked out by using the finite volume technique with the SIMPLE algorithm on a uniformly staggered mesh. QUICK and central difference schemes were used to handle convective and diffusive elements. In-house code is developed using FORTRAN programming to visualize the isotherms, streamlines, heatlines and entropy contours, which are handled by Tecplot software. The influence of nanoparticles volume fraction, heat generation factor, external magnetic forces and an irreversibility ratio on energy transport and flow patterns is examined.

The results show that the hybrid nanoparticles concentration augments the thermal transmission and the entropy production increases also while the augmentation of temperature difference results in a diminution of entropy production. Finally, magnetic force has the significant impact on heat transfer, isotherms, streamlines and entropy. It has been observed that the external magnetic force plays a good role in thermal regulations.

Hybrid nanofluid is a desirable coolant for an electrical device. Various nanoparticles and their combinations can be analysed. Ferro-copper hybrid nanofluid considered with the help of prevailing literature review. The research would benefit scientists and engineers by improving their comprehension of how to analyses convective heat transmission and forecast more accurate heat transfer rates in various fields.

Due to its helpful characteristics, ferrous-copper hybrid nanofluid is a desirable coolant for an electrical device. The research would benefit scientists and engineers by improving their comprehension of how to analyse convective heat transmission and forecast more accurate heat transfer rates in cutting-edge technological systems used in sectors like thermal transportation, cooling systems for electronic devices, etc.

Entropy generation is used for an evaluation of the system’s performance, which is an indicator of optimal design. Hence, in recent times, it does a good engineering sense to draw attention to irreversibility under magnetic force, and it has an indispensable impact on investigation of electronic devices.

An efficient numerical technique has been developed to solve this problem. The originality of this work is to analyse convective energy transport and entropy generation in a chamber with internal block, which is capable of maintaining heat and producing heat. Effects of irreversibility ratio are scrutinized for the first time. Analysis of convective heat transfer and entropy production in an enclosure with internal isothermal/heat generating blocks gives the way to predict enhanced heat transfer rate and avoid the failure of advanced technical systems in industrial sectors.

The study aims to assess the heater and cooler positional impacts systematically using four different quadrantal cavities filled with hybrid nanofluid, keeping the curved surface adiabatic under the orientated magnetic fields. Both heat transfer and entropy generation analyses are performed for a hybrid nanofluid flow in a quarter circular cavity considering different orientations of magnetic fields. The investigation is focused to assess the heater and cooler positional impacts systematically using four different quadrantal cavities (first to fourth quadrantal cavities), keeping the curved surface always adiabatic. The impacts of pertinent variables like Rayleigh number, Hartmann number and volumetric concentration of hybrid nanofluid on heat transfer characteristics are in consideration with the second law of thermodynamics. The analysis includes the thermal, viscous and magnetic aspects of entropy generation.

After validating against the experimental results, the present work explores numerically following the Galerkin weighted finite element technique. The solution is obtained through an iterative process satisfying the convergence limit of 10⁻⁸ and 10⁻¹⁰ for the maximum residuals and the mass defect, respectively.

It revealed that the mutual exchange of heater-cooler positions on the adjacent straight edges of the quadrant cavity does not have any impact on the flow direction. Although the magnitude of flow velocity enhances, the sidewall plays a decision-making role in the formation of a single circulation vortex. It also shows that thermal entropy production is the main cause behind thermodynamic irreversibility. The second or third quadrantal arrangement could have been opted as the best configuration of the heater-cooler position for achieving superior heat transfer. The Lorentz force plays a great role to moderate the heat transfer process. The maximum entropy generation is located, as expected, at the heating-cooling junction point.

There are plenty of prospects for extension of the present research concept numerically or experimentally, adopting three-dimensional analysis, working fluids, boundary conditions, etc. In fact, the study could be carried out for unsteady or turbulent fluid flow.

As the position of the heated source and cold sink on the enclosure geometry can significantly alter the thermo-fluid phenomena, this kind of analysis is of utmost relevance for the further development of efficient heating/cooling arrangements and proper management of the devices subjected to magnetic field applications. This original contribution could be a potentially valuable source for future research and exploration pertaining to a thermal system or device, like heat exchangers, solar collectors, thermal storage, electronic cooling, food and drying technologies and others.

In the literature, an inadequate number of works have focused on a quadrantal cavity, mostly considering the first quadrant of the circle. However, during practical applications, it is possible that the cavity can take the shape of the other three quadrants too, and the corresponding knowledge on relative performance is still missing. Furthermore, the present investigation includes the existence of magnetic fields at various orientations. The impact analysis of this field-induced Lorentz force on the nanofluid thermal performance is another major contribution from the present work that would enrich the domain knowledge and could be useful for thermal system engineers.

The purpose of this study is to carry out a comprehensive analysis of magneto-hydrodynamics (MHD), nanofluidic flow dynamics and heat transfer as well as thermodynamic irreversibility, within a novel butterfly-shaped cavity. Gaining a thorough understanding of these phenomena will help to facilitate the design and optimization of thermal systems with complex geometries under magnetic fields in diverse applications.

To achieve the objective, the finite element method is used to solve the governing equations of the problem. The effects of various controlling parameters such as butterfly-shaped triangle vertex angle (T), Rayleigh number (Ra), Hartmann number (Ha) and magnetic field inclination angle (γ ) on the hydrothermal performance are analyzed meticulously. By investigating the effects of these parameters, the authors contribute to the existing knowledge by shedding light on their influence on heat and fluid transport within butterfly-shaped cavities.

The major findings of this study reveal that the geometrical shape significantly alters fluid motion, heat transfer and irreversibility production. Maximum heat transfer, as well as entropy generation, occurs when the Rayleigh number reaches its maximum, the Hartmann number is minimized and the angle of the magnetic field is set to 30° or 150°, while the butterfly wings angle or vertex angle is kept at a maximum of 120°. The intensity of the magnetic field significantly controls the heat flow dynamics, with higher magnetic field strength causing a reduction in the flow strength as well as heat transfer. This configuration optimizes the heat transfer characteristics in the system.

Further research can be expanded on this study by examining thermal performance under different curvature effects, orientations, boundary conditions and additional factors. This can be accomplished through numerical simulations or experimental investigations under various multiphysical scenarios.

The geometric configurations explored in this research have practical applications in various engineering fields, including heat exchangers, crystallization processes, microelectronic devices, energy storage systems, mixing processes, food processing, air-conditioning, filtration and more.

This study brings value by exploring a novel geometric configuration comprising the nanofluidic flow, and MHD effect, providing insights and potential innovations in the field of thermal fluid dynamics. The findings contribute a lot toward maximizing thermal performance in diverse fields of applications. The comparison of different hydrothermal behavior and thermodynamic entropy production under the varying geometric configuration adds novelty to this study.

The purpose of this paper is to analyse role transition for professionals moving towards hybrid managerial roles. Specifically, the authors examine reforms to the national tax agency in the UK, focusing on attempts to shift hybrid managers away from a focus on tax compliance, to a greater customer focus. This extends understanding of the relationship between New Public Management (NPM) and the public professions, by offering greater insight into the dynamic between regulators and regulatees, as professionals are co-opted into management roles that encompass greater customer orientation.

The authors draw on documentary data relating to reform from 2003 to 2012 and 43 semi-structured interviews with senior tax inspectors co-opted into hybrid manager roles.

The findings support established accounts of the effect of NPM reform to public professions, as these professionals are co-opted into hybrid management roles. Some hybrid managers resist, others embrace the demands of the new role. Linked to a hitherto neglected aspect of analysis (the extent to which hybrid managers embrace a greater customer orientation) the findings also show a more novel third response: some hybrid managers leave the national tax agency for opportunities in the private sector. These public-to-private professionals the authors call “canny customers”. Canny customers are ideally placed to exploit aspects of NPM reform, and thereby accelerate changes in the governance of public agencies, but in a way that might undermine the function of the tax agency and tax professions.

In regulatory settings, policy reform to co-opt professionals into hybrid managerial roles may have mixed effects. In settings where a focal dynamic is the regulator-regulatee relationship, effective governance will require understanding of the labour market to temper excess influence by those hybrid managers who become canny customers, otherwise, in settings where it is easy for individuals to move from regulator to regulatee, the pace and consequences of reform will be harder to govern. This runs the danger of eroding professional values. The specific case of tax professionals reflects themes in the literature examining hybridisation for accountants, and provides novel insight into the dynamics of professionalism that extend to the case of accountants.

The contribution is to extend the literature on role transition of professionals. The authors focus on hybrid managers in the context of a regulatory agency: the UK national tax agency. Policy reforms associated with hybridisation emphasised customer orientation. The authors highlight labour market characteristics impacting the regulator-regulatee dynamic, and an as yet unexplored, unintended consequence of reform. The public professional who leaves for the private sector becomes a “canny customer” who can exploit and accelerate reform.