Search results

The purpose of this paper is to examine the service accessibility of Somali Australians suffering Autism Spectrum Disorder (ASD) by using both quantitative and qualitative methods.

Using Geographic Information System (GIS) and the 2011 census data a total of 19,178 people reporting Somali ancestry were mapped to SA1 level with most being in the three capital cities of original migration; Sydney, Melbourne and Perth.

Access to primary services pertinent to ASD was measured using the GIS software, some 15 per cent of these cities Somali children were within 500 m of a General practice and 89 per cent within 2,000 m. A quarter of children were within 2,000 m of a speech pathology service access point and nearly a third (31 per cent) within 2,000 m of a psychologist. Qualitative analysis found a quite negative perspective on mental illness and ASD within the community with 85 per cent of respondents reporting a “Bad” perception of ASD within the community.

Clearly, the opportunity these data provide is to develop service models targeting need and changing perspectives of ASD within an at risk community.

This is the first time in Australia that issues of service access (health) for Autism suffers and their families has been analysed in a detailed geographic manner.

Outlines new database products appearing in the Gale Directory of Databases, a two‐volume work published twice a year. Provides figures for the distribution and percentage of new and newly implemented science technology and medicine databases, together with a lits of the databases including name, vendor and medium. Briefly discusses these by each medium.

The purpose of this paper is to review the challenges present in the development of hand exoskeletons powered by pneumatic artificial muscles. This paper also presents the development of a novel strain sensor and its application in a five‐fingered hand exoskeleton.

The issues of current hand exoskeletons powered by pneumatic artificial muscles are examined by studying the artificial muscles and the human hand anatomy. Traditional sensors are no longer suitable for applications in hand exoskeletons. A novel strain sensor was developed by depositing a conducting polymer called polypyrrole onto a natural rubber substrate through vapor phase polymerization and is used in the authors' five‐fingered hand exoskeleton.

The error of measurements from the polypyrrole strain sensor in controlling the actuation of pneumatic artificial muscles is within 1.5 mm. The small physical size and weight of the novel polypyrrole strain sensor also helped to keep the exoskeleton's profile (less than 20 mm) and total weight low (<1 kg).

The novel strain sensor allows the realization of hand exoskeletons that are lightweight, portable and low profile. This improves the comfort and practicality of hand exoskeletons to allow their usage outside the research environment.

Science, Technology, Engineering, and Mathematics (STEM) education, its importance, and its difficulties have been defined. This chapter seeks to present the digital tools that have been used during the pandemic period and that have been focused on promoting STEM education at different levels. The efforts made by educational organizations worldwide are mentioned. Different regions are shown presenting the best experiences of digital tools that enhance the elements of STEM and can be extended to different levels of education from elementary school to university. On the other hand, successful experiences of the use of technological tools from the teachers' point of view are shown, depicting the tools that have worked the most during the process of adapting to online classes to devise a much better educational plan that continues to take advantage of digital tools for STEM education.

Sex and age estimation is important, particularly when information about the deceased is unavailable. There are limited radiological studies investigating side, sex and age differences in normal ankle morphometric parameters. The authors’ goal was to evaluate different ankle joint morphometric measurements and document variations among Egyptians.

A prospective study was conducted throughout 23 months on 203 (100 males and 103 females) adult Egyptians, aged between 20-69 years old, who were referred for a plain x-ray of bilateral normal ankle joints.

Ankle parameters showed no statistical difference between both sides, except for tarsal width (TaW) which was significantly higher on right than left side (26.92 ± 2.66 vs 26.18 ± 2.65 mm). Males showed significantly higher morphometric values except for anteroposterior gap (APG) and talus height (TaH) which were significantly higher in females (2.29 ± 0.80 vs 1.80 ± 0.61 mm and 13.01 ± 1.68 vs 11.87 ± 1.91 mm, respectively). There was significant increase in tibial arc length, APG, distance of level of MTiTh from anterior limit of mortise, distance of level of MTiTh from vertex of mortise, sagittal distance between tibial and talar vertices and sagittal radius of trochlea tali arc in old age group compared to young one. A significant decrease in tibial width, malleolar width, TaW and TaH was noted in old age group compared to young one.

Ankle joints of both sides are mostly symmetrical; however, there are significant differences in most morphometric values due to sex and age factors. These findings may be essential during side, sex and age determination.

Presents the results of an investigation into the feasibility of producing models of human anatomy by linking MRI and stereolithography. Begins by describing the requirements for developing a link between the two technologies together with the major problems that this involves. Describes the processes undertaken to enable the creation of a model of a human brain. The model showed excellent anatomical details and demonstrated that the technique of linking MRI and stereolithography is entirely feasible. However, the preparatory work required prior to building the model showed that there are many difficulties associated with transferring and processing the imaging data. Recommendations are made as to how this technique needs to evolve.

In the recent decades, energy drinks consumption has increased dramatically. Many researches found their adverse effects on the structure and function of organs and systems, with nervous and cardiovascular systems most studied. Liver is one of the priority target organs in case of beverages consumption. The purpose of this paper is to explore the effects of energy drink consumption on morphofunctional conditions of liver.

A search in PubMed, Web of Science, Scopus and eLIBRARY.ru databases was performed using relevant keywords.

Both clinical and experimental data concerning effects of energy drink use on structure and function of liver are summarized and systematized in this review. Most of them documented hepatotoxicity after prolonged over-consumption of energy drinks. Probable mechanisms of action of their basic ingredients (sugars, caffeine, taurine, D-glucuronolactone, vitamin B3) on morphology and functioning of liver as well as combined use of energy drinks with alcohol are described.

This review paper represents evidential information about the negative impact of energy drink consumption on morphofunctional conditions of liver.

The following article is a “Q&A interview” conducted by Joanne Pransky of Industrial Robot journal as a method to impart the combined technological, business and personal experience of a prominent, robotic industry engineer-turned-entrepreneur regarding the evolution, commercialization and challenges of bringing a technological invention to market. The paper aims to discuss these issues.

The interviewee is Jacob Rosen, a Professor of Medical Robotics at the Department of Mechanical and Aerospace Engineering, University of California, Los Angeles (UCLA), where he directs the Bionics Lab. Professor Rosen is also the Director of Surgical Robotics Engineering at the UCLA School of Medicine’s Center for Advanced Surgical and Interventional Technology and has joint appointments at UCLA’s Department of Surgery and UCLA’s Department of Bioengineering. Professor Rosen is the co-founder of the companies Applied Dexterity, ExoSense and SPI. As a pioneer in medical robotics devices and technologies, Professor Rosen describes his unique approaches and philosophies.

Dr Rosen received his BSc degree in Mechanical Engineering, MSc and PhD degrees in Biomedical Engineering from Tel-Aviv University in 1987, 1993 and 1997, respectively. From 1987 to 1992, he served as an officer in the Israeli Defense Forces studying human–machine interfaces. From 1993 to 1997, he was a research associate at Tel-Aviv University, as well as held a position at a startup company developing innovative orthopedic spine/pelvis implants. From 2001-2013, he held faculty positions at the University of Washington and at University of California, Santa Cruz.

Dr Rosen developed several key systems in the field of medical robotics, such as the Blue and the Red Dragon, for minimally invasive surgical skill evaluation; RAVEN, a surgical robotic system for telesurgery; and several generations of upper and lower limb exoskeletons including the Exo-UL7 – a dual arm wearable robotic system. He is a co-author of 100 manuscripts in the field of medical robotics and a co-author and co-editor of two books entitled “Surgical Robotics – Systems, Applications, and Visions” and “Redundancy in Robot Manipulators and Multi-robot systems” published by Springer. Professor Rosen has filed eight different patent applications and also works as an expert witness and consultant on design, patent protection & litigation and malpractice regarding surgical robotics.