Search results

This study examines how professional technicians' teaching styles and students' learning readiness affect cooking skills performance in culinary inheritance.

This study constructed a learning performance model from the situated cognition perspective using a sample of students at universities and vocational colleges on a professional technician course. A total of 4,000 questionnaires were mailed to students, of which 2,018 were returned.

Students regard technical professors as teaching experts and expect them to care for their learning, while professional technicians' knowledge sharing significantly increases students' learning performance. The findings provide insight into professional technicians' teaching styles for academics.

This study focuses on the situated cognition perspective and its correlation with students' learning performance and discusses professional technicians' knowledge sharing as an important influencing factor.

This research aimed to analyse the relationships between chefs' knowledge, learning with suppliers and restaurant sales performance.

A performance model was formulated, and the hypotheses were evaluated using partial least squares (PLS). The research questionnaires were sent by post to the chefs who confirmed leading for product innovation in the restaurants and yielded 166 completed questionnaires.

Whilst the chef is developing new products, restaurant operations should pay attention to the supplier's subsequent income convenience. Additionally, through the cooperation of chefs and suppliers, innovative and valuable products can improve restaurant performance and maintain a competitive advantage. Moreover, tacit knowledge sharing can become a chef's ability to learn and provide competitive advantages and benefits to restaurants.

Valuable products can be advantageous to restaurants and increase restaurants' operating performance. Moreover, the development of new products is important for restaurants' operations. Further, chefs will understand market trends and make the culinary innovation process closer to the market by learning from their colleagues and partners. Additionally, chefs prefer culinary creation to provide more tacit knowledge with suppliers.

The Internet of Things (IoT) is used in the fresh agricultural product (FAP) supply chain, which can be coordinated through a revenue-sharing contract. The purpose of this paper is to make the three-level supply chain coordinate in IoT by considering the influence of FAP on market demand and costs of controlling freshness on the road.

A three-level FAP supply chain that comprises a manufacturer, distributor, and retailer in IoT is regarded as the research object. This study improves the revenue-sharing contract, determines the optimal solution when the supply chain achieves maximum profit in three types of decision-making situations, and develops the profit distribution model based on the improved revenue-sharing contract to coordinate the supply chain.

The improved revenue-sharing contract can coordinate the FAP supply chain that comprises a manufacturer, distributor, and retailer in IoT, as well as benefit all enterprises in the supply chain.

Resource utilization rate can be improved after coordinating the entire supply chain. Moreover, loss in the circulation process is reduced, and the circulation efficiency of FAPs is improved because of the application of IoT. The validity of the model is verified through a case analysis.

This study is different from other research in terms of the combination of supply chain coordination, FAPs, and radio frequency identification application in IoT.

The geomagnetic field vector is a function of the satellite’s position. The position and speed of the satellite can be determined by comparing the geomagnetic field vector measured by on board three-axis magnetometer with the standard value of the international geomagnetic field. The geomagnetic model has the disadvantages of uncertainty, low precision and long-term variability. Therefore, accuracy of autonomous navigation using the magnetometer is low. The purpose of this paper is to use the geomagnetic and sunlight information fusion algorithm to improve the orbit accuracy.

In this paper, an autonomous navigation method for low earth orbit satellite is studied by fusing geomagnetic and solar energy information. The algorithm selects the cosine value of the angle between the solar light vector and the geomagnetic vector, and the geomagnetic field intensity as observation. The Adaptive Unscented Kalman Filter (AUKF) filter is used to estimate the speed and position of the satellite, and the simulation research is carried out. This paper also made the same study using the UKF filter for comparison with the AUKF filter.

The algorithm of adding the sun direction vector information improves the positioning accuracy compared with the simple geomagnetic navigation, and the convergence and stability of the filter are better. The navigation error does not accumulate with time and has engineering application value. It also can be seen that AUKF filtering accuracy is better than UKF filtering accuracy.

Geomagnetic navigation is greatly affected by the accuracy of magnetometer. This paper does not consider the spacecraft’s environmental interference with magnetic sensors.

Magnetometers and solar sensors are common sensors for micro-satellites. Near-Earth satellite orbit has abundant geomagnetic field resources. Therefore, the algorithm will have higher engineering significance in the practical application of low orbit micro-satellites orbit determination.

This paper introduces a satellite autonomous navigation algorithm. The AUKF geomagnetic filter algorithm using sunlight information can obviously improve the navigation accuracy and meet the basic requirements of low orbit small satellite orbit determination.

With continuous concerning on the toxic of element Pb, Pb-free solder was gradually used to replace traditional Sn-Pb solder. However, during the transition period from Sn-Pb to Pb-free solder, mixing of Sn-Pb and Pb-free is inevitable occurred in certain products, and in China where Sn-Pb solder was still used extensively in certain areas especially. Correspondingly, understanding reliability of Sn-Pb solder joints was very important, and further studies were needed.

Thermal shock test between −55°C and 125 °C was conducted on Sn-37Pb solder bumps in the BGA package to investigate the microstructure evolution and the growth mechanism of interfacial intermetallic compound (IMC) layer. The effects of thermal shock on the mechanical property and fracture behavior of Sn-37Pb solder bumps were discussed.

Pb-rich phase was coarsened and voids were increased at first; Pb-rich phase was refined and voids were decreased secondly with the increase of thermal shock cycles; the shear strength of solder bumps was slightly decreased after thermal shock, but was back up to 73.67MPa at 2,000 cycles; interfacial IMCs of solder bumps was from typical scallop-type into smooth, the composition of IMCs was from Cu₆Sn₅ into Cu₆Sn₅ and Cu₃S_n after thermal shock with 1,500 and 2,000 cycles; 20.0 per cent of solder bumps at 1,500 cycles and 9.5 per cent of solder bumps at 2,000 cycles were failure respectively.

Compared with the board level test method, the impact shear test for the single solder bump is more convenient and economical and is actively pursued by the industries. The shear strength of solder bumps was slightly decreased after thermal shock, but was back up to 73.67 MPa at 2,000 cycles; 20.0 per cent of solder bumps at 1,500 cycles and 9.5 per cent of solder bumps at 2,000 cycles were failure.

The purpose of this paper is to analyze the feasibility and challenges of one open training model in family‐owned companies' offspring education, regarded as CHINT's prodigal fund.

The paper is currently confined to literature and case study on CHINT's prodigal fund and is primarily based on the documents analysis and interviews with the members from the board of supervisors and the board of directors.

The relationship between the performance of venture capital fund and the succession was analyzed. It is found that the two main reasons affecting the development of prodigal fund are the unsystematically organization of fund development and the lack of diligence. Finally, to attract and motivate the use of family venture funds and to establish a sound governance mechanism will be the two chief areas to promote the development of family funds.

It is the first attempt to analyze and summarize this creative practice in succession – family venture fund. The case study provides a valuable perspective on educating the entrepreneurial spirit of innovation and exploration.

Evidence of mean reversion in U.S. stock prices during the post‐World War II era is mixed. I find that using the standard portfolio formation method to construct size‐sorted portfolios is inadequate for detecting mean reversion. Using alternative portfolio formation methods and additional cross‐sectional power gained from size‐sorted portfolios during the period 1963 to 1998, I find strong evidence of mean reversion in portfolio prices. My findings imply a significantly positive speed of reversion with a half‐life of approximately three and a half years. Parametric contrarian investment strategies that exploit mean reversion outperform buy‐and‐hold and standard contrarian strategies.

The paper's aim is to study tribological performances of two 2‐mercaptobenzothiazole derivatives which are ashless and lacking in phosphorous as lubricating oil additives in HVIW H150 base oils.

The two 2‐mercaptobenzothiazole derivatives were synthesized; their tribological performances were evaluated with a four‐ball machine, and the worn surface was analyzed with a X‐ray photoelectron spectroscopy (XPS).

The two compounds possess good anti‐wear properties and excellent load‐carrying capacity. According to the XPS results, the additive reacted with counter‐face metal and generated a sulphur‐containing inorganic film consisting of FeS, FeS₂ and FeSO₄, and a complex N‐containing resin polymer film.

Their antioxidant properties are not estimated, and their anti‐wear action mechanism need to be further explored.

Two useful ashless AW lubricating oil additives were synthesized, and may be has potential as gas engine lubricating oil additives.

This paper provides a study of some N, S‐containing heterocyclic compounds as lubricating oil additives.

The purpose of the research was to test whether the novel synthesized additive TEAT can be a substitution for the traditional additive ZDDP partly or entirely in mineral oil.

The extreme pressure, antiwear (AW) and friction reducing property of TEAT was examined, the tribological property of the combination of TEAT and ZDDP was also examined. The worn surfaces of the steel balls were observed using a polarizing optical microscope and x‐ray absorption near edge structure spectroscopy.

The results show that: TEAT can enhance the P_B value of the base oil obviously; TEAT shows better AW performance than ZDDP in high load and a wide range of concentration, it shows better friction‐reducing performance than ZDDP in high load and all the concentration tested; TEAT alone can provide a better AW and friction reducing property than ZDDP and the combination of TEAT and ZDDP; and the tribochemical reaction occurs between novel compound and metallic surface, generating sulfur containing layer mainly exists in the form of FeS.

These findings indicate that TEAT presents better tribological properties than ZDDP in a wide range of practical conditions. TEAT may be a substitute for ZDDP in the future.

The purpose of this paper is to study tribological properties of two novel additives in the diester and provide adequate information on the relationship between the diester and the additives.

The two 2‐mercaptobenzothiazole derivatives, referred to as BZIA, BZOA, are synthesized with one pot; their tribological performances are evaluated using a four‐ball friction and wear tester, and the worn surface was analysed with scanning electron microscope and X‐ray photoelectron spectroscopy (XPS).

The two compounds as the additives in the diester possess excellent load‐carrying capacities, rather good anti‐wear (AW) and friction reduction properties. According to the XPS results, both the additives reacted with counter‐face metal and generated a sulphur‐containing inorganic film and a complex adsorption film. The inorganic film obtained with the additive BZOA consisted of FeS₂, FeSO₄ and Fe₂(SO₄)₃, whereas the inorganic film obtained with the additive BZIA consisted of FeS₂ or FeS. The adsorption layer for the two additives contained N‐containing compounds.

The interaction of the two additives with the diester needs to be further explored.

Two useful, environmentally friendly, AW lubricating oil additives are synthesized with one pot.

The paper provides a study of some N, S‐containing heterocyclic compounds as environmentally friendly lubricating oil additives.