Search results

By introducing the mass customization service mode into the cloud logistics environment, this paper studies the joint optimization of service provider selection and customer order decoupling point (CODP) positioning based on the mass customization service mode to provide customers with more diversified and personalized service content with lower total logistics service cost.

This paper addresses the general process of service composition optimization based on the mass customization mode in a cloud logistics service environment and constructs a joint decision model for service provider selection and CODP positioning. In the model, the two objective functions of minimum service cost and most satisfactory delivery time are considered, and the Pareto optimal solution of the model is obtained via the NSGA-II algorithm. Then, a numerical case is used to verify the superiority of the service composition scheme based on the mass customization mode over the general scheme and to verify the significant impact of the scale effect coefficient on the optimal CODP location.

(1) Under the cloud logistics mode, the implementation of the logistics service mode based on mass customization can not only reduce the total cost of logistics services by means of the scale effect of massive orders on the cloud platform but also make more efficient use of a large number of logistics service providers gathered on the cloud platform to provide customers with more customized and diversified service content. (2) The scale effect coefficient directly affects the total cost of logistics services and significantly affects the location of the CODP. Therefore, before implementing the mass customization logistics service mode, the most reasonable clustering of orders on the cloud logistics platform is very important for the follow-up service combination.

The originality of this paper includes two aspects. One is to introduce the mass customization mode in the cloud logistics service environment for the first time and summarize the operation process of implementing the mass customization mode in the cloud logistics environment. Second, in order to solve the joint decision optimization model of provider selection and CODP positioning, this paper designs a method for solving a mixed-integer nonlinear programming model using a multi-layer coding genetic algorithm.

This study investigates the relationships among digital transformation, technological innovation, industry–university–research collaborations and labor income share in manufacturing firms.

The relationships are tested using an empirical method, constructing regression models, by collecting 1,240 manufacturing firms and 9,029 items listed on the A-share market in China from 2013 to 2020.

The results indicate that digital transformation has a positive effect on manufacturing companies’ labor income share. Technological innovation can mediate the effect of digital transformation on labor income share. Industry–university–research cooperation can positively moderate the promotion effect of digital transformation on labor income share but cannot moderate the mediating effect of technological innovation. Heterogeneity analysis also found that firms without service-based transformation and nonstate-owned firms are better able to increase their labor income share through digital transformation.

This study provides a new path to increase the labor income share of enterprises to achieve common prosperity, which is important for manufacturing enterprises to better transform and upgrade to achieve high-quality development.

This study is aimed at making an inspection of the effects of collaborative innovation network characteristics on firm innovation performance, and the intermediary roles of knowledge transfer efficiency is taken into account.

This study used a convenient sampling method to obtain population and samples. Using data obtained by publishing online and paper questionnaires, and using on-site interviews in Anhui Province in the Yangtze River Delta region of China, descriptive analysis, regression analysis and correlation analysis are utilized to study the direct influence of collaborative innovation network characteristics on knowledge transfer efficiency as well as firm innovation performance, and the intermediary roles of knowledge transfer efficiency on firm innovation performance, respectively. In this study, 3,000 questionnaires were distributed to the employees of enterprises engaged in research and development (R&D) activities, of which 2,560 were valid. With the help of SPSS24.0 software, the reliability and validity of the questionnaire was analyzed.

The results are indicative of that network centrality and relationship strength positively affect knowledge transfer efficiency and firm innovation performance. Nevertheless, network scale has no significant correlation with knowledge transfer efficiency and enterprise innovation performance. In addition, knowledge transfer efficiency is an intermediary between collaborative innovation network characteristics and enterprise innovation performance, and positively affects enterprise innovation performance, which demonstrated that managers should take advantage of collaborative innovation network characteristics to elevate knowledge transfer efficiency because well-realized transferals of knowledge can help accelerate the coordination of resources in knowledge, and finally bring about the advancement of firm's innovation abilities and performance.

There are few previous studies that fully examined the relationships among collaborative innovation network characteristics, knowledge transfer efficiency and firm innovation performance. This paper developed previous researches on the relationships between collaborative innovation network characteristics, knowledge transfer efficiency and firm innovation performance. The mediation of knowledge transfer efficiency on the relationship between collaborative innovation network characteristics and firm innovation performance is analyzed. Further, studies on collaborative innovation network characteristics using data obtained from employees engaged in R&D activities are very limited in the literature. On account of that, the findings in this study may make sense to the innovation ability of innovative enterprise and expand the literature in the field of enterprise strategic management and knowledge management.

This analysis shows that collaborative innovation network characteristics have both positive and negative effects on firm innovation performance. Therefore, business managers should pay attention to their position in the collaborative innovation network and maintain the relationship strength with other innovation subjects. Special consideration should be given to the knowledge transfer of innovative enterprises, so as to improve firm innovation performance practically.

The study may provide additional understandings for researchers, government managers, universities and enterprises with regard to strategic management from the visual angle of innovation ecosystems. It is instrumental in the exploration of the mechanisms enabling firm innovation performance.

Purpose: This study aims to identify communication speech acts and transaction terms in online stores (Olshop) during live streaming on Facebook amid the COVID-19 pandemic and to understand communication patterns between sellers and buyers when shopping on Facebook live streaming in Indonesia.

The Need for Research: This research is motivated by the skill gap arising from increasing buying and selling transactions through live streaming on Facebook. Cultural and demographic shifts, along with the widespread availability of modern technologies and marketing 2.0 have resulted in the global population adopting social media at rates far beyond our use of the Internet, making a compelling case by example and analogy that social media has the potential to level the playing field and is effective in reaching their target market.

Methodology: The type of research is descriptive-qualitative using corpus data instruments. The data collection technique in this study was carried out by reading and observing the data and listening to speeches about buying and selling women’s equipment from various online stores on Facebook. Then select and sort the data designated as forms, strategies, and functions of speech acts in buying and selling transactions during live streaming on Facebook. The data analysis technique has three steps: (1) reducing the amount of data; (2) presenting the data; and (3) concluding.

Findings: The results show that there are four types of speech acts between sellers and buyers in the live-streaming online shop on Facebook, namely, assertive, directive, expressive, and commissive speech acts.

Rotating machinery is a crucial component of large equipment, and detecting faults in it accurately is critical for reliable operation. Although fault diagnosis methods based on deep learning have been significantly developed, the existing methods model spatial and temporal features separately and then weigh them, resulting in the decoupling of spatiotemporal features.

The authors propose a spatiotemporal long short-term memory (ST-LSTM) method for fault diagnosis of rotating machinery. The authors collected vibration signals from real rolling bearing and gearing test rigs for verification.

Through these two experiments, the authors demonstrate that machine learning methods still have advantages on small-scale data sets, but our proposed method exhibits a significant advantage due to the simultaneous modeling of the time domain and space domain. These results indicate the potential of the interactive spatiotemporal modeling method for fault diagnosis of rotating machinery.

The authors propose a ST-LSTM method for fault diagnosis of rotating machinery. The authors collected vibration signals from real rolling bearing and gearing test rigs for verification.

The combination of an Engineered Cementitious Composite (ECC) layer and steel plate to reinforce RC beams (ESRB) is a new strengthening method. The ESRB was proposed based on the steel plate at the bottom of RC beams, aiming to solve the problem of over-reinforced RC beams and improve the bearing capacity of RC beams without affecting their ductility.

In this paper, the finite element model of ESRB was established by ABAQUS. The results were compared with the experimental results of ESRB in previous studies and the reliability of the finite element model was verified. On this basis, parameters such as the width of the steel plate, thickness of the ECC layer, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar were analyzed by the verified finite element model. Based on the load–deflection curve of ESRB, ESRB was discussed in terms of ultimate bearing capacity and ductility.

The results demonstrate that when the width of the steel plate increases, the ultimate load of ESRB increases to 133.22 kN by 11.58% as well as the ductility index increases to 2.39. With the increase of the damage degree of the original beam, the ultimate load of ESRB decreases by 23.7%–91.09 kN and the ductility index decreases to 1.90. With the enhancement of the cross-sectional area of longitudinal tensile rebar, the ultimate bearing capacity of ESRB increases to 126.75 kN by 6.2% and the ductility index elevates to 2.30. Finally, a calculation model for predicting the flexural capacity of ESRB is proposed. The calculated results of the model are in line with the experimental results.

Based on the comparative analysis of the test results and numerical simulation results of 11 test beams, this investigation verified the accuracy and reliability of the finite element simulation from the aspects of load–deflection curve, characteristic load and failure mode. Furthermore, based on load–deflection curve, the effects of steel plate width, ECC layer thickness, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar on the ultimate bearing capacity and ductility of ESRB were discussed. Finally, a simplified method was put forward to further verify the effectiveness of ESRB through analytical calculation.

Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.

This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.

A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.

Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.

During the coronavirus disease 2019 (COVID-19) pandemic, ubiquitous social media has become a primary channel for information dissemination, social interactions and recreational activities. However, it remains unclear how social media usage influences nonpharmaceutical preventive behavior of individuals in response to the pandemic. This paper aims to explore the impacts of social media on COVID-19 preventive behaviors based on the theoretical lens of empowerment.

In this paper, survey data has been collected from 739 social media users in China to conduct structural equation modeling (SEM) analysis.

The results indicate that social media empowers individuals in terms of knowledge seeking, knowledge sharing, socializing and entertainment to promote preventive behaviors at the individual level by increasing each person's perception of collective efficacy and social cohesion. Meanwhile, social cohesion negatively impacts the relationship between collective efficacy and individual preventive behavior.

This study provides insights regarding the role of social media in crisis response and examines the role of collective beliefs in the influencing mechanism of social media. The results presented herein can be used to guide government agencies seeking to control the COVID-19 pandemic.

The purpose of this paper is to explore the effect of ZnO on the structure and properties of micro-arc oxidation (MAO) coating on rare earth magnesium alloy under large concentration gradient.

The macroscopic and microscopic morphology, thickness, surface roughness, chemical composition and structure of the coating were characterized by different characterization methods. The corrosion resistance of the film was studied by electrochemical and scanning Kelvin probe force microscopy. The results show that the addition of ZnO can significantly improve the compactness and corrosion resistance of the MAO coating, but the high concentration of ZnO will cause microcracks, which will reduce the corrosion resistance to a certain extent.

When the concentration of zinc oxide is 8 g/L, the compactness and corrosion resistance of the coating are the best, and the thickness of the coating is positively correlated with the concentration of ZnO.

Too high concentration of ZnO reduces the performance of MAO coating.

The MAO coating prepared by adding ZnO has good corrosion resistance. Combined with organic coatings, it can be applied in corrosive marine environments, such as ship parts and hulls. To a certain extent, it can reduce the economic loss caused by corrosion.

The effect of ZnO on the corrosion resistance of MAO coating in electrolyte solution was studied systematically, and the conclusion was new to the common knowledge.

With the increasing number of Web services, correct and efficient classification of Web services is crucial to improve the efficiency of service discovery. However, existing Web service classification approaches ignore the class overlap in Web services, resulting in poor accuracy of classification in practice. This paper aims to provide an approach to address this issue.

This paper proposes a label confusion and priori correction-based Web service classification approach. First, functional semantic representations of Web services descriptions are obtained based on BERT. Then, the ability of the model is enhanced to recognize and classify overlapping instances by using label confusion learning techniques; Finally, the predictive results are corrected based on the label prior distribution to further improve service classification effectiveness.

Experiments based on the ProgrammableWeb data set show that the proposed model demonstrates 4.3%, 3.2% and 1% improvement in Macro-F1 value compared to the ServeNet-BERT, BERT-DPCNN and CARL-NET, respectively.

This paper proposes a Web service classification approach for the overlapping categories of Web services and improve the accuracy of Web services classification.