Search results

The aim of this paper is to provide a simple yet accurate and efficient geometric method for thermal homogenization of impregnated and non-impregnated coil winding technologies based on the concept of thermal resistance.

For regular windings, the periodic microscopic cell in the winding space is identified. Also, for irregular windings, the average microscopic cell of the winding is determined. An approximation is used to calculate the thermal resistance of the winding cell. Based on this approximation, the winding insulation is considered as a circular ring around the wire. Mathematical equations are obtained to calculate the equivalent thermal resistance of the cell. The equivalent thermal conductivity of the winding is calculated using equivalent thermal resistance of the cell. Winding thermal homogenization is completed by determining the equivalent thermal properties of the cell.

The thermal pattern of different windings is simulated and compared with the results of different homogenization methods. The results show that the proposed method is applicable for a wide range of windings in terms of winding scheme, packing factor and winding insulation. Also, the results show that the proposed method is more accurate than other winding homogenization methods in calculating the equivalent thermal conductivity of the winding.

In this paper, the change of electrical resistance of the winding with temperature and thermal contact between the sub-components are ignored. Also, liquid insulators, such as oils, and rectangular wires were not investigated. Research in these topics is considered as future work.

Unlike other homogenization methods, the proposed method can be applied to non-impregnated and irregular windings. Also, compared to other homogenization methods, the proposed method has a simpler formulation that makes it easier to program and implement. All of these indicate the efficiency of the proposed method in the thermal analysis of the winding.

This paper aims to introduce an alternative for modeling levitation forces between NdFeB magnets and bulks of high-temperature superconductors (HTS). The presented approach should be evaluated through two different formulations and compared with experimental results.

The T-A and H-ϕ formulations are among the most efficient approaches for modeling superconducting materials. COMSOL Multiphysics was used to apply them to magnetic levitation models and predict the forces involved.The permanent magnet movement is modeled by combining moving meshes and magnetic field identity pairs in both 2D and 3D studies.

It is shown that it is possible to use the homogenization technique for the T-A formulation in 3D models combined with mixed formulation boundaries and moving meshes to simulate the whole device’s geometry.

The case studies are limited to the formulations’ implementation and a brief assessment regarding degrees of freedom. The intent is to make the simulation straightforward rather than establish a benchmark.

The H-ϕ formulation considers the HTS bulk domain as isotropic, whereas the T-A formulation homogenization approach treats it as anisotropic. The originality of the paper lies in contrasting these different modeling approaches while incorporating the external magnetic field movement by means of the Lagrangian–Eulerian method.

The purpose of this paper is to investigate the free vibration response of a laminated honeycomb sandwich panels (LHSP) for aerospace applications. Higher order shear deformation theory (HSDT) was simplified for the dynamic analysis of LHSP. Furthermore, the effects of honeycomb parameters on the value of natural frequency (NF) of vibration were explored.

This paper applies HSDT to the analysis of composite LHSP to derive four vibration differential equations of motion and solve it to find the NF of vibration. Two analytical models (Nayak and Meunier models) were selected from literature for comparison of the NF of vibration. In addition, a numerical model was built by using ABAQUS and the results were compared. Furthermore, parametric studies were conducted to explore the effect of honeycomb parameters on the value of the NF of vibration.

The present model is successful in simplifying HSDT for the analysis of LHSP. The first five natural frequencies of vibration were calculated analytically and numerically. In the parametric study, increasing core height or young’s modulus or changing laminate layup will increase the value of NF of vibration. Furthermore, increasing plate constraint (using clamped edge boundary condition) will increase the value of NF of vibrations.

The current analysis is suitable for all-composite symmetric LHSP. However, for isotropic or non-symmetric materials, minor modifications might be adopted.

The application of simplified HSDT to the analysis of LHSP is one of the important values of this research. The other is the successful and complete dynamic analysis of all-composite LHSP.

Business models (BMs) are becoming increasingly crucial for value creation in the healthcare sector. The study explores the conceptualization and application of BM concepts within the healthcare sector and investigates their evolution in emerging economies (EEs) and developed economies (DEs). This study aims to uncover these two contexts' shared characteristics and unique variances through a comparative analysis.

The paper systematically investigates and consolidates the literature on healthcare by employing the antecedents, decisions and outcomes (ADO) framework and finally examines 71 shortlisted articles published between 2003 and 2022.

The recognition of the BM within healthcare is increasing, both in EEs and DEs. EEs prioritize value creation and capture through cost efficiency, while DEs focus on innovation. Key theories employed include a resource-based view, the network theory and the theory of innovation. Case studies are commonly used as a methodology. Further research is needed to explore the decisions and outcomes of BMs.

The study adopts stringent filtration and keyword criteria, potentially excluding relevant research. Future researchers are encouraged to broaden their selection criteria to encompass a more extensive range of relevant studies.

Beyond comparing and highlighting gaps in BMs between EEs and DEs, benchmarking DE's healthcare business models (HBMs) helps healthcare organizations in EEs align their practices, mitigate risks and establish efficient healthcare systems tailored to their specific contexts. The study adopts stringent filtration and keyword criteria, potentially excluding relevant research. Future researchers are encouraged to broaden their selection criteria to encompass a more extensive range of relevant studies.

The study analyzes HBMs using an SLR framework perspective and provides practical implications for academicians and practitioners to enhance their decision-making.

Social procurement (SP) is a complicated and risky innovation, the adoption of which needs to be accompanied by complementary process and organizational change. To date, however, there has been little empirical evidence explaining whether and how different sorts of external pressures affect the level of SP adoption in the construction sector. Drawing on institutional theory, this study aims to analyze how three types of isomorphic pressures (i.e. coercive, mimetic and normative pressures) influence the adoption of SP in the construction sector.

The impacts of these pressures are empirically tested with survey data collected from 134 construction firms in the Chinese construction industry.

The findings show that both coercive and mimetic pressures have a considerable impact on the adoption of SP. However, there is little evidence in this study that normative demands had a major impact on SP.

This research is a useful instrument for promoting a favorable social attitude regarding construction procurement. Through socioeconomic regeneration and development, procurement can be considered as a significant route for social transformation, economic development and poverty reduction.

This study addresses the paucity of research into SP in the construction industry by establishing the institutional drivers to procuring services and products from a social enterprise perspective. Findings from this study extend the frontiers of existing knowledge on SP in the construction industry.

This study aims to explore the adoption of enterprise risk management (ERM) in developing and developed countries. Is there a similarity or difference between the two contrasting institutional markets and the reasons behind them?

The adoption of ERM is analyzed on the basis of the institutional framework. The author draws empirical evidence by comparing the cases of a British and an Indian insurance company using evidence from multiple sources. This paper focuses on extra-organizational pressures exerted by economic, social and political situations across two countries that influenced the adoption decision of ERM.

The findings of this research revealed that early adopters of ERM in different institutional markets face coercive and normative pressure but not mimetic pressure. The adoption of ERM in India and the UK is dissimilar. Companies in the British insurance market encounter higher institutional forces than those in the Indian market because of higher coercive and normative pressure. The aspirations to adopt ERM in the Indian and UK markets included improved strategic decision-making to maintain stakeholder expectations and higher standards of corporate governance. In the UK, ERM was adopted to reduce surprises and fluctuations under flexible regulations but with stricter adoption and to improve credit ratings.

Previous literature has discussed ERM adoption in similar markets or within one market with similar institutional pressure. In contrast, this research is a comparative study that explains the analysis of institutional theory in two different institutional environments in the adoption of ERM.

Research indicates a long historical connection between racism and nationalist ideologies. This connection has been highlighted in the resurgence of exclusionary nationalism in recent years, across many multicultural societies. This chapter discusses the notions of race, ethnicity and nation, and critically examines how racism shapes contemporary manifestations of nationalist discourse across the world. It explores the historical role of settler-colonialism, imperial expansions and the capitalist development in shaping the racial/ethnic aspect of nationalist development. Moreover, it provides an analysis of the interconnections between the racialisation of minorities, exclusionary ideologies and the consolidation of ethno-nationalist tropes. This chapter further considers the impact of demographic changes in reinforcing anti-migrant exclusionary sentiments. This is examined in connection with emerging nativist discourse, exploring how xenophobic racism has shaped and is shaped by nostalgic nationalism based on the sanitisation of the legacies of Empire and colonialism.

The purpose of this paper is the dynamic analysis and seismic damage assessment of steel sheet pile quay wall with inelastic behavior underground motions using several accelerograms.

Finite element analysis is conducted using the Plaxis 2D software to generate the numerical model of quay wall. The extension of berth 25 at the port of Bejaia, located in northeastern Algeria, represents a case study. Incremental dynamic analyses are carried out to examine variation of the main response parameters under seismic excitations with increasing Peak ground acceleration (PGA) levels. Two global damage indices based on the safety factor and bending moment are introduced to assess the relationship between PGA and the damage levels.

The results obtained indicate that the sheet pile quay wall can safely withstand seismic loads up to PGAs of 0.35 g and that above 0.45 g, care should be taken with the risk of reaching the ultimate moment capacity of the steel sheet pile. However, for PGAs greater than 0.5 g, it was clearly demonstrated that the excessive deformations with material are likely to occur in the soil layers and in the structural elements.

The main contribution of the present work is a new double seismic damage index for a steel sheet pile supported quay wharf. The numerical modeling is first validated in the static case. Then, the results obtained by performing several incremental dynamic analyses are exploited to evaluate the degradation of the soil safety factor and the seismic capacity of the pile sheet wall. Computed values of the proposed damage indices of the considered quay wharf are a practical helping tool for decision-making regarding the seismic safety of the structure.

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

This paper aims to offer insight into how strategies within the accounting profession, which has been becoming more global, might be changed by the recent outbreak of the Second Cold War between the West and the Rest of the World.

We explore the strategies of those who called themselves “Confucian accountants” in China, a country which has recently discouraged its state-owned enterprises from using the services of the Big 4. We do this by employing qualitative research methods, including reflexive photo interviews, in which Big-4 accountants, recognised as the most Westernised accounting actors in China, and Confucian accountants are asked to take and explain photographs representing their professional lives. Bourdieu’s notions of “economy of practices” and “vision-of-division strategy” are drawn upon to understand who the Confucian accountants are and what they do strategically in their pursuit of a higher revenue stream and improved social standing in the Chinese social space.

The homegrown Confucian accountants share cultural-cognitive characteristics with neighbouring social actors, such as their clients and government officials, who have been inculcated with Confucianism and the state’s cultural confidence policy in pursuit of a “socialist market economy with Chinese characteristics”. Those accountants try to enhance their social standing and revenue stream by strategically demonstrating their difference from Big-4 accountants. For this purpose, they wear Confucian clothes, have Confucian props in their office, employ Confucian phrases in their everyday conversations, use Confucian business cards and construct and maintain guanxi with government officials and clients.

This paper is the first attempt to explore Confucian accountants’ strategies for increasing their revenue and social standing at the start of the Second Cold War.