Search results

The purpose of this study is to develop a map for the holistic business process management (BPM) diagnosis in order to guide the choice of techniques that encompass all dimensions of the business process.

The design science research method was used, with the elaboration of seven steps to project solutions to empirical problems: (1) identification of the problem, (2) awareness of the problem, (3) definition of expected results, (4) design and development, (5) demonstration, (6) evaluation of artifacts and (7) communication. These steps were organized in different analyzes: descriptive, experimental and observational. The descriptive analysis comprised steps one to three (identification of the problem, awareness of the problem, definition of expected results) and made use of the systematic literature review procedure for proposing artifacts. The experimental analysis comprised steps four to five (design and development, and demonstration), where the consultation with specialists' procedures and then the Delphi procedure for the construction of the artifacts were carried out. In the observational analysis, steps six (evaluation of artifacts), where two case studies were performed, and step seven (communication), in which the map for the holistic BPM diagnosis was presented were carried out.

The article systematizes the BPM diagnostic techniques scattered throughout the literature and relates how these techniques relate to dimensions. A map for the holistic BPM diagnosis is generated containing 21 techniques and 9 dimensions, with 45 relationships between these techniques and tools. Another aspect is that the map shows that in BPM promotion projects, techniques are not restricted to any specific phase of the life cycle.

Professionals can use the map to form a blend with selected techniques and use them for holistic BPM diagnosis according to the skills and other resources of the project team.

The map developed is innovative because it relates a set of consolidated techniques for each dimension of the process to provide the holistic diagnosis for the organization. It is important to highlight that these techniques and dimensions were scattered in the literature.

This study aims to analyze the business process management (BPM) applicability to a destination country-brand of a Latin American developing country and present a new process model for it.

This is a qualitative exploratory study whose unit of analysis is the BPM applicability to the destination country-brand of a Latin American developing country. Primary data were obtained through in-depth interview with the developing country's tourism international promotion agency. The secondary data were government reports and research papers on country-brand studies. Data analysis was carried out using stakeholder business context model, architecture processes, pain/gain matrix and BPMN for modelling.

The results present a new process model for country-brand management to reduce existing barriers. Three steps were carried out: analysis and modelling of the current processes of country-brand management; presentation of the current processes' problems and analysis and modelling of future processes country-brand management.

A theoretical contribution is provided in the literature on processes and country-brands since no previous studies relate these concepts and present a process-oriented management analysis for country-brands.

The main practical contribution was to identify the country-brand management problems, propose solutions to them and generate a new process model for country-brands that can be used as a managerial tool for national tourism organizations to improve their brands.

The present study is original as it approaches the first analysis of country-brand development with an emphasis on its process management.

The aim of this article is to present the relationship between the nature of business processes (BPs) and the nature of knowledge used in the course of their execution on the basis of an analysis of the relevance of different dimensions of BPs. The conclusion presented herein points to the inextricable relationship between business process management (BPM) and knowledge management (KM) in the knowledge economy (KE).

The paper is conceptual in nature and is grounded in the theories of BPM and KM.

The article analyses the significance of the changing nature of BPs for particular dimensions of BPs, as well as the relationships between the nature of BPs and the kinds of knowledge used in subsequent stages of the BPM Lifecycle. These relationships, which are primarily tied to the dimensions of BP Unpredictability and Knowledge-intensity, should be taken into account in each element of the BPM ecosystem to a larger degree, the larger the significance of processes which require dynamic management in an organization.

The article is a contribution to the theoretical reflection on the holistic approach to BPM. It expressly points to the inevitable necessity of integration (dynamic) BPM with KM, with the exception of the specific case of traditional BPM, which encompasses structured BPs. This integration requires us to take into account the influence of KM in virtually all of the elements of the BPM ecosystem.

The article points to the necessity of researching the nature of executed and managed BPs as early as in the course of preparing the organization to implement BPM in the KE. The aim is to select and/or adapt implementation methodologies and systems, supporting BPM in the organization to the real BPs nature. The analysis presented in the article on the dimensions of BPs points to the particular significance of the method of adjusting elements of the BPM ecosystem in the execution and analysis and diagnosis stages of the BPM lifecycle.

The article presents an original view of the interrelations between BPM and KM in the knowledge intensive organizations (KIOs) in the KE.

Business process implementation has been primarily seen as a redesign of the workflow with the consequent organizational change assumed to be taking place automatically or through a process of “muddling through”. Although evidence suggests that 70 per cent of business process reengineering programmes have failed due to lack of alignment with corporate change strategy, the question of alignment of workflow redesign with the organizational change process has not received adequate attention. The purpose of this paper is to provide a framework for managing organizational change in a structured manner during workflow redesign, a perspective missing in the literature on business process management (BPM) implementation.

This paper attempts to integrate the 8-S dimensions of Higgins model across the different phases of workflow redesign to develop a process framework of managing organizational change during BPM workflow redesign. As an exploratory study the paper draws on existing literature on BPM and change alignment to conceptualize an alignment framework of associated managerial activities involved during different phases of BPM workflow redesign. The framework is evaluated against two case studies of business process implementation to substantiate how lack of alignment leads to failure in BPM implementation.

The paper provides a conceptual framework of how organizational change should be managed during BPM implementation. The model suggests the sequence of alignment of the 8-S dimensions (Higgins, 2005) with the different phases of the workflow redesign and identifies the role of the managerial levels in the organization in managing the alignment of the 8-S dimensions during business process change.

This framework would provide managers with an execution template of how to achieve alignment of the workflow redesign with the 8-S dimensions thus facilitating effective organizational change during business process implementation.

This paper proposes a process model of how organizational elements should be aligned with the workflow redesign during business process change implementation. No such model is available in BPM literature proposing alignment between hard and soft factors.

Start-ups can change the direction of a country's economy when they manage to remain in the market, as they are companies that generate innovation, income and employment. However, these are companies that need both favorable external conditions that guarantee their survival, and internal capacities for the development of a management that is able to consider the needs for change in the product or service and consolidate the business as a whole. Therefore, start-ups need to develop dynamic capabilities (DCs), which are achieved through the processes that direct, coordinate and formulate the strategies of the other processes. Therefore, adopting a management approach that enables the development of DCs is essential for the survival of start-ups. The business process management (BPM) approach becomes an appropriate option, since it identifies business processes to adapt organizational management to new market demands. It can be used to interpret the environment, to understand the organization internally and to transform; it is flexible to the needs and characteristics of each organization. Based on this, the objective of the study is to develop a BPM framework that operationalizes the development of DCs in start-ups.

The method used consisted of two case studies and analysis of documents and seven interviews. Two start-ups that underwent BPM promotion in 2018 and 2020 were selected. The start-ups are Brazilian and from the biotechnology sector. Interviews were conducted with the team that promoted BPM at start-ups and with members of the start-ups that participated in the promotion. The interviews followed a semi-structured script elaborated according to the authors of the literature review. Discourse analysis was used to identify excerpts from the statements that expressed the content of the questions. All interviews were recorded with the prior consent of the participants and later validated with them.

The BPM promotion framework for start-ups is divided into four steps: “frame BPM,” “understand BPM,” “enable BPM” and “continue BPM”. Nine principles constitute the promotion of BPM: (1) context consideration principle, (2) holistic, (3) simplicity, (4) involvement, (5) empowerment, (6) shared understanding, (7) purpose, (8) technological appropriation and (9) continuity. Promoting BPM in start-ups has developed dynamic entrepreneurial and networking capabilities.

As for the contribution to society, scientific studies make it possible to structure tacit knowledge and give direction to human action based on assertive methods; thus, the scientific contribution on DCs and start-ups brings assertiveness to start-up managers and the entire chain they impact with their actions, which makes their performance more beneficial to society.

As for the contribution to the state-of-the-art, visualizing the principles in a practical way, through the application of the BPM promotion project in start-ups, made it possible to understand the BPM cycle in a less rigid and more fluid way. This format proved to be suitable for the start-ups in the case study, as it ensured that they learned both about how the approach works and about the advantages of using it in the management of start-ups, thus contributing to the development of these important organizations for the economy of different countries.

The purpose of this paper is to propose and describe a method that uses recurrent problems to increase the efficiency and effectiveness of the diagnosis of new product development (NPD) processes and supports the identification of improvement opportunities. The proposed method, called Diagile, is based on recurrent current reality trees (CRTs) and is a new way of building CRTs that includes best project management practices, and the identification and prioritization of improvement opportunities. To support the execution of the method, recurrent problems were identified and a computational tool to aid the diagnosis, a database of improvement opportunities and an automated spreadsheet to prioritize improvement projects were developed.

The proposed method was evaluated through a controlled experiment at a multinational manufacturer of office supplies.

The results achieved confirm that the use of the Diagile method increases the diagnostic efficiency and effectiveness when compared to diagnoses performed by the traditional CRT method.

The validity of the method must be tested on a larger scale, since this work involved only one controlled experiment for this purpose. The experiment involved the participation of postgraduate research assistants, who cannot be considered specialists in the diagnosis of NPD. One could question whether the method will be as helpful for proficient users as well. The authors did not have proficient users available to run the experiment. However, the authors believe that such a specialist would save time in carrying out a diagnosis with Diagile, and also be more effective in validating the diagnosis. However, this assumption could not be tested here and can therefore be considered a limiting factor of the experiment. Nevertheless, the positive results of the evaluations of the companies and users of the two case studies corroborate the statement that the objective of this work was attained.

The greater efficiency and effectiveness provided by the proposed Diagile method was also evident in the identification and prioritization of improvement opportunities. The experimental group drew up a more relevant and coherent list of improvement projects than the control group, and provided documentation for these projects in the form of project charts. The authors believe these results can be of a great impact if implemented by practitioners.

This paper proposes a new way to perform diagnostic of NPD process. In particular, this process is well known to be highly strategic, nevertheless, normally excluded out of improvement initiatives because of its complexity. The diagnostic method proposed is a powerful tool to assist practitioners finding systemic improvement opportunities, expanding the assessment to all dimensions of a business process, e.g. people, technology and process activities.

The aim of this study is to provide a holistic analysis of all possible maritime business logistics processes related to import and export shipments in a fuzzy environment through a case study of a maritime logistics company based on the as-is and to-be models within business process management (BPM).

The analyses considered the following perspectives: (i) in the stage of the process identification, the definition of the problem was carried out; (ii) in the stage of the process discovery, ocean department was divided into ocean export/import operation departments; ocean export/import operation were divided into freight collect/prepaid operation processes; ocean export/import logistics activity groups were broken down into sub-activities for freight collect/prepaid operation; the logistics activity groups and their sub-activities were defined; each sub-activity as either operation or documentation process group was classified; the durations of sub-activities were evaluated by decision-makers (DMs) as fuzzy sets (FSs); the monthly total jobs activities were estimated by DMs as FSs; the applied to monthly jobs activities of total shipments were estimated by DMs as FSs; the durations of each sub-activities were aggregated; the duration of the logistics activity groups and the sub-activities for per job were calculated; the cumulative workload of logistics activity groups and sub-activities were calculated; the duration of sub-activities for per job as operation or documentation departments were calculated, (iii) in the stage of the process analysis, cumulative ocean export/import workload as operation or documentation for freight collect/prepaid were calculated; duration of activity groups and sub-activities for per job as operation or documentation were calculated; cumulative workload activity groups and sub-activities as operation or documentation were calculated, (iv) in the stage of the process redesign, cumulative workload, process cycle time as operation and documentation group and required labor force were calculated; the process cycle time of the theoretical, the as-is model and the to-be model were calculated: (i) the theoretical minimum process cycle time without resource were calculated by the critical path method (CPM), (ii) the process cycle time of the as-is model perspective with the 1 person resource constraint and (iii) the process cycle time of the to-be model perspective with the 2-person resource constraint were calculated by the resource constrained project scheduling problem (RCPSP) method.

The methodology for analyzing the ocean department operation process was successfully implemented in a real-life case study. It is observed that the results of the to-be model can be applicable for the company. The BPM-proposed methodology is applicable for the maritime logistics industry in the present study; however, it can be applied to other companies in maritime logistics as well as other industries.

This study contributes to research using BPM methodology in maritime logistics. This is the first study the logistics process analyses were carried out in terms of including all operation processes for a company. All processes were analyzed by using BPM methodology in maritime logistics. This study demonstrated the application of the BPM as-is and to-be models to maritime logistics. The as-is and the to-be models of the BPM methodology were applied in maritime logistics.

This methodology applied in this study can enable organizations operating in the time-urgent maritime logistics sector to manage their logistics processes more efficiently, increase customer satisfaction, reduce the risks of customer loss due to poor operational performance and increase profits in the long term. Through the use of these methodologies utilizing FSs, the CPM and the RCPSP methods, this study is expected to make contributions to the BPM literature and provide original insights into the field. Furthermore, this study will undertake a comprehensive analysis of maritime logistics with respect to BPM to deliver noteworthy contributions to the maritime logistics literature and provide original perspectives into the field.

This work explores the potential benefits of aligning the strategic planning process with a BPM program in a clinical research center (CRC). The purpose of this paper is to define a process for executing strategic planning oriented towards the promotion of a BPM program.

The method applied is action research. This allowed the solution of a practical problem and at the same time the proposition of a new approach to promote BPM in alignment with strategy, which was synthesized in the model presented.

The analysis and structuring of the strategic planning process, with the assessment of the as-is situation, were adequate as a preparation step for the first cycle of a BPM program in the CRC. Based on lessons learned along the research project, a model was proposed for the strategic planning process oriented towards promoting BPM.

The model was conceived from a single application at a CRC, through a cycle of action research. This is one of the limitations of this work. The model was not yet sufficiently tested in other contexts. This represents opportunities for future research.

The evaluation step in the action research cycle revealed that the organization in focus was satisfied with the results. New management practices in the organizations in focus were implemented as a result of this work.

Process improvement initiatives are a novelty in the CRC context, and this work may serve as a reference for CRC managers seeking to improve overall performance. The proposed model in this work indicates that a BPM program should start with strategic planning. An initial assessment of the as-is situation of the organization in focus was performed based on the analysis of the undesirable effects in the organization’s management practices, using a technique of the Theory of Constraints. The use of this technique facilitated the identification of solutions to the root causes identified in the assessment. The level of the assessment was deeper in comparison to results obtained with traditional tools used in strategic planning processes. The assessment supports the definition of actions oriented to solving the majority of the management dysfunctions of the organization in focus.

Given the complexity and difficulties of the health sector, the question that this study attempts to answer is as follows: what are the main results of studies on business process management (BPM) and lean in the health sector? The purpose of this paper is to analyze the results of studies that address the promotion of BPM and lean in the health sector.

To conduct a survey of published studies using the BPM and lean approach in healthcare, a search was performed in the Scopus, Web of Science, and PubMed databases in two steps. The first step consisted of the collection and analysis of data related to the BPM approach in the health sector, based on a survey of published articles on this topic. The second step consisted of the collection and analysis of data related to the use of lean in the same sector, based on the survey of systematic reviews published in major databases.

The main results of the studies that address the promotion of BPM and lean in the health sector are as follows: a reduced length of hospitalization, increased patient satisfaction, increased patient efficiency and safety, a reduction in the time of notification of infection, help with organizational change, understanding the end-to-end process, increased motivation, understanding the importance of some handoffs for patient safety, improvements in quality indicators in the emergency department, and improvements in the organization’s focus on high-level processes. By contrast, a single study showed difficulties in promoting management focused on processes in which decisions are unique and difficult to model.

The results may help in the identification of research gaps in the promotion of BPM and lean healthcare and in the development of relevant research. In addition, by understanding how health organizations are promoting management focused on processes and the results obtained with this approach, managers from other organizations, especially in this sector, can reflect and develop similar actions that seek to improve the quality of services offered, increase productivity and customer satisfaction, and reduce costs, errors, and waiting times.

Multidisciplinary business process management (BPM) research can reap significant impact. We can particularly benefit from incorporating accounting concepts to address some of the key BPM challenges, such as value-creation and return on investment of BPM activities. However, research which addresses a relationship between BPM and accounting is scarce. The purpose of this paper is to provide a detailed synthesis of the current literature that has integrated accounting aspects with BPM. The authors profile and thematically describe existing research, and derive evidence-based directions to guide future research.

A multi-staged structured literature review approach to search for the two broad themes, accounting and BPM, supported by NVivo (to manage the papers and the coding and analysis processes) was designed and followed.

The paper confirms the dearth of work that ties the two disciplines, despite the synergetic multidisciplinary results that can be attained. Available literature is mostly from the management accounting perspective and relates to describing how performance management, in particular performance measurement, can be applicable to process improvement initiatives together with tools such as activity-based costing and the balanced scorecard. There is a lack of research that examines BPM in relation to any financial accounting perspectives (such as external reporting). Future research directions are proposed together with implications for practitioners with the findings of this structured literature review.

The paper provides a detailed synthesis of the existing literature on the nexus between accounting and BPM. It summarizes the implications for practitioners and provides directions for future research by identifying key gaps and opportunities with a sound contextual basis for extension and new work.

Effective literature reviews create strong foundations for future research and accumulate the otherwise scattered knowledge into a single place. This is the first structured literature review that provides a detailed synthesis of the research that ties together the accounting and BPM disciplines, providing a basis for future research directions together with implications for practitioners.