Search results
1 – 10 of 59Chongli Di, Xiaohua Yang, Xuejun Zhang, Jun He and Ying Mei
The purpose of this paper is to simulate and analyze accurately the multi-scale characteristics, variation periods and trends of the annual streamflow series in the Haihe River…
Abstract
Purpose
The purpose of this paper is to simulate and analyze accurately the multi-scale characteristics, variation periods and trends of the annual streamflow series in the Haihe River Basin (HRB) using the Hilbert-Huang Transform (HHT).
Design/methodology/approach
The Empirical Mode Decomposition (EMD) approach is adopted to decompose the original signal into intrinsic mode functions (IMFs) in multi-scales. The Hilbert spectrum is applied to each IMF component and the localized time-frequency-energy distribution. The monotonic residues obtained by EMD can be treated as the trend of the original sequence.
Findings
The authors apply HHT to 14 hydrological stations in the HRB. The annual streamflow series are decomposed into four IMFs and a residual component, which exhibits the multi-scale characteristics. After the Hilbert transform, the instantaneous frequency, center frequency and mean period of the IMFs are obtained. Common multi-scale periods of the 14 series exist, e.g. 3.3a, 4∼7a, 8∼10a, 11-14a, 24∼25a and 43∼45a. The residues indicate that the annual streamflow series has exhibited a decreasing trend over the past 50 years.
Research limitations/implications
The HHT method is still in its early stages of application in hydrology and needs to be further tested.
Practical implications
It is helpful for the study of the complex features of streamflow.
Social implications
This paper will contribute to the sustainable utilization of water resources.
Originality/value
This study represents the first use of the HHT method to analyze the multi-scale characteristics of the streamflow series in the HRB. This paper provides an important theoretical support for water resources management.
Details
Keywords
Yuri Merizalde, Luis Hernández-Callejo, Oscar Duque-Pérez and Víctor Alonso-Gómez
Despite the wide dissemination and application of current signature analysis (CSA) in general industry, CSA is not commonly used in the wind industry, where the use of vibration…
Abstract
Purpose
Despite the wide dissemination and application of current signature analysis (CSA) in general industry, CSA is not commonly used in the wind industry, where the use of vibration signals predominates. Therefore, the purpose of this paper is to review the use of generator CSA (GCSA) in the online fault detection and diagnosis of wind turbines (WTs).
Design/methodology/approach
This is a bibliographical investigation in which the use of GCSA for the maintenance of WTs is analyzed. A section is dedicated to each of the main components, including the theoretical foundations on which GCSA is based and the methodology, mathematical models and signal processing techniques used by the proposals that exist on this topic.
Findings
The lack of appropriate technology and mathematical models, as well as the difficulty involved in performing actual studies in the field and the lack of research projects, has prevented the expansion of the use of GCSA for fault detection of other WT components. This research area has yet to be explored, and the existing investigations mainly focus on the gearbox and the doubly fed induction generator; however, modern signal treatment and artificial intelligence techniques could offer new opportunities in this field.
Originality/value
Although literature on the use of GCSA for the detection and diagnosis of faults in WTs has been published, these papers address specific applications for each of the WT components, especially gearboxes and generators. For this reason, the main contribution of this study is providing a comprehensive vision for the use of GCSA in the maintenance of WTs.
Details
Keywords
Rajesh Babu Damala, Ashish Ranjan Dash and Rajesh Kumar Patnaik
This research paper aims to investigate the change detection filter technique with a decision tree-based event (fault type) classifier for recognizing and categorizing power…
Abstract
Purpose
This research paper aims to investigate the change detection filter technique with a decision tree-based event (fault type) classifier for recognizing and categorizing power system disturbances on the high-voltage DC (HVDC) transmission link.
Design/methodology/approach
A change detection filter is used to the average and differential current components, which detects the point of fault initiation and records a change detection point (CDP). The half-cycle differential and average currents on both sides of the CDP are sent through the signal processing unit, which produces the respective target. The extracted target indices are sent through a decision tree-based fault classifier mechanism for fault classification.
Findings
In comparison with conventional differential current protection systems, the developed framework is faster in fault detection and classification and provides great accuracy. The new technology allows for prompt identification of the fault category, allowing electrical grids to be restored as quickly as possible to minimize economic losses. This novel technology enhances efficiency in terms of reducing computing complexity.
Research limitations/implications
Setting a threshold value for identification is one of the limitations. To bring the designed system into stability condition before creating faults on it is another limitation. Reducing the computational burden is one of the limitations.
Practical implications
Creating a practical system in laboratory is difficult as it is a HVDC transmission line. Apart from that, installing rectifier and converter section for HVDC transmission line is difficult in a laboratory setting.
Originality/value
The suggested scheme’s importance and accuracy have been rigorously validated for the standard HVDC transmission system, subjected to various types of DC fault, and the results show the proposed algorithm would be a feasible alternative to real-time applications.
Details
Keywords
Arka Ghosh, David John Edwards, M. Reza Hosseini, Riyadh Al-Ameri, Jemal Abawajy and Wellington Didibhuku Thwala
This research paper adopts the fundamental tenets of advanced technologies in industry 4.0 to monitor the structural health of concrete beam members using cost-effective…
Abstract
Purpose
This research paper adopts the fundamental tenets of advanced technologies in industry 4.0 to monitor the structural health of concrete beam members using cost-effective non-destructive technologies. In so doing, the work illustrates how a coalescence of low-cost digital technologies can seamlessly integrate to solve practical construction problems.
Design/methodology/approach
A mixed philosophies epistemological design is adopted to implement the empirical quantitative analysis of “real-time” data collected via sensor-based technologies streamed through a Raspberry Pi and uploaded onto a cloud-based system. Data was analysed using a hybrid approach that combined both vibration-characteristic-based method and linear variable differential transducers (LVDT).
Findings
The research utilises a novel digital research approach for accurately detecting and recording the localisation of structural cracks in concrete beams. This non-destructive low-cost approach was shown to perform with a high degree of accuracy and precision, as verified by the LVDT measurements. This research is testament to the fact that as technological advancements progress at an exponential rate, the cost of implementation continues to reduce to produce higher-accuracy “mass-market” solutions for industry practitioners.
Originality/value
Accurate structural health monitoring of concrete structures necessitates expensive equipment, complex signal processing and skilled operator. The concrete industry is in dire need of a simple but reliable technique that can reduce the testing time, cost and complexity of maintenance of structures. This was the first experiment of its kind that seeks to develop an unconventional approach to solve the maintenance problem associated with concrete structures. This study merges industry 4.0 digital technologies with a novel low-cost and automated hybrid analysis for real-time structural health monitoring of concrete beams by fusing several multidisciplinary approaches into one integral technological configuration.
Details
Keywords
Nadia Nurnajihah M. Nasir, Salvinder Singh, Shahrum Abdullah and Sallehuddin Mohamed Haris
The purpose of this paper is to present the application of Hilbert–Huang transform (HHT) for fatigue damage feature characterisation in the time–frequency domain based on strain…
Abstract
Purpose
The purpose of this paper is to present the application of Hilbert–Huang transform (HHT) for fatigue damage feature characterisation in the time–frequency domain based on strain signals obtained from the automotive coil springs.
Design/methodology/approach
HHT was employed to detect the temporary changes in frequency characteristics of the vibration response of the signals. The extraction successfully reduced the length of the original signal to 40 per cent, whereas the fatigue damage was retained. The analysis process for this work is divided into three stages: signal characterisation with the application of fatigue data editing (FDE) for fatigue life assessment, empirical mode decomposition with Hilbert transform, an energy–time–frequency distribution analysis of each intrinsic mode function (IMF).
Findings
The edited signal had a time length of 72.5 s, which was 40 per cent lower than the original signal. Both signals were retained statistically with close mean, root-mean-square and kurtosis value. FDE improved the fatigue life, and the extraction did not affect the content and behaviour of the original signal because the editing technique only removed the minimal fatigue damage potential. HHT helped to remove unnecessary noise in the recorded signals. EMD produced sets of IMFs that indicated the differences between the original signal and mean of the signal to produce new components. The low-frequency energy was expected to cause large damage, whereas the high-frequency energy will cause small damage.
Originality/value
HHT and EMD can be used in the strain data signal analysis of the automotive component of a suspension system. This is to improve the fatigue life, where the extraction did not affect the content and behaviour of the original signal because the editing technique only removed the minimal fatigue damage potential.
Details
Keywords
Seyed Amin Bagherzadeh and Mahdi Sabzehparvar
This paper aims to present a new method for identification of some flight modes, including natural and non-standard modes, and extraction of their characteristics, directly from…
Abstract
Purpose
This paper aims to present a new method for identification of some flight modes, including natural and non-standard modes, and extraction of their characteristics, directly from measurements of flight parameters in the time domain.
Design/methodology/approach
The Hilbert-Huang transform (HHT), as a novel prevailing tool in the signal analysis field, is used to attain the purpose. The study shows that the HHT has superior potential capabilities to improve the airplane flying quality analysis and to conquer some drawbacks of the classical method in flight dynamics.
Findings
The proposed method reveals the existence of some non-standard modes with small damping ratios at non-linear flight regions and obtains their characteristics.
Research limitations/implications
The paper examines only airplane longitudinal dynamics. Further research is needed regarding lateral-directional dynamic modes and coupling effects of the longitudinal and lateral modes.
Practical implications
Application of the proposed method to the flight test data may result in real-time flying quality analysis, especially at the non-linear flight regions.
Originality/value
First, to utilize the empirical mode decomposition (EMD) capabilities in real time, a local-online algorithm is introduced which estimates the signal trend by the Savitzky-Golay sifting process and eliminates it from the signal in the EMD algorithm. Second, based on the local-online EMD algorithm, a systematic method is proposed to identify flight modes from flight parameters in the time domain.
Details
Keywords
Wei‐Ling Chiang, Dung‐Jiang Chiou, Cheng‐Wu Chen, Jhy‐Pyng Tang, Wen‐Ko Hsu and Te‐Yu Liu
This study aims to investigate the relationship between structural damage and sensitivity indices using the Hilbert‐Huang transform (HHT) method.
Abstract
Purpose
This study aims to investigate the relationship between structural damage and sensitivity indices using the Hilbert‐Huang transform (HHT) method.
Design/methodology/approach
The relationship between structural damage and the sensitivity indices is obtained by using the HHT method. Three sensitivity indices are proposed: the ratio of rotation (RR), the ratio of shifting value (SV) and the ratio of bandwidth (RB). The nonlinear single degree of freedom and multiple degree of freedom models with various predominant frequencies are constructed using the SAP2000 program. Adjusted PGA El Centro and Chi‐Chi (TCU068) earthquake data are used as the excitations. Next, the sensitivity indices obtained using the HHT and the fast Fourier transform (FFT) methods are evaluated separately based on the acceleration responses of the roof structures to earthquakes.
Findings
Simulation results indicate that, when RR < 1, the structural response is in the elastic region, and neither the RB nor SV in the HHT and FFT spectra change. When the structural response is nonlinear, i.e. RR1, a positive trend of change occurs in RB and RR, while in the HHT spectra, SV increases with an increasing RR. Moreover, the FFT spectra reveal that SV changes only when the RR is sufficiently large. No steady relationship between the RB and the RR can be found.
Originality/value
The paper demonstrates the effectiveness of the HHT method.
Details
Keywords
Pantelis G. Nikolakopoulos, Anastasios Zavos and Dimitrios A. Bompos
Continuous on-line monitoring of structural integrity are in priority in many engineering fields such as aerospace, automotive, civilian structures, and industrial applications…
Abstract
Purpose
Continuous on-line monitoring of structural integrity are in priority in many engineering fields such as aerospace, automotive, civilian structures, and industrial applications. Of all these possible applications, the aerospace industry has one of the highest payoffs. Possible damage can lead to catastrophic failures and costly inspections. On the other hand, processing a signal consists of important feature from sensors measurements to reach the considered target. Typically, the sensors translate a physical phenomenon from one or many sources in temporal variations or in spatial variations. The purpose of this paper is to investigate damages, in terms of suddenly screw removal or in a small cut, detection in vibrating (clamped-free) aluminum beam structures using the empirical mode decomposition (EMD) method along with the Hilbert-Huang transformation (HHT). The perspective is to identify very small defects in real aircraft structures.
Design/methodology/approach
The proposed method deals with a new time-frequency signal processing analysis tool, for damages detection in a vibrating plate. An experimental test ring is used in order to excite a clamped-free aluminum plate. Two types of excitations are used. The first one is a harmonic excitation and the second one is a random excitation provided by an impact hammer. A hole and its filled by a screw with mass of 0.2 g, and a small cut is created, simulating a cut creation, are produced afterword, and the HHT is used in order to arise the developed oscillations, and to reveal hidden reflections in the data and to provide a high-resolution energy-time frequency spectrum.
Findings
The major finding was the clear amplitude increment either for screw removal or for cut creation, using the EMD process with the HHT, giving the possibility to detect them.
Originality/value
The use of the HHT to detect, using an experimental procedure, two different defects: a suddenly screw removal and a cut creation, in a clamped-free beam, excited by non-stationary and non-linear signals.
Details
Keywords
The purpose of this paper is to propose a new fault feature extraction scheme for the rolling element bearing.
Abstract
Purpose
The purpose of this paper is to propose a new fault feature extraction scheme for the rolling element bearing.
Design/methodology/approach
The generalized Stockwell transform (GST) and the singular value ratio spectrum (SVRS) methods are combined. A time-frequency distribution measurement criterion named the energy concentration measurement (ECM) is initially used to determine the parameter of the optimal GST method. Then, the optimal GST is applied to conduct a time-frequency transformation for a raw signal. Subsequently, the two-dimensional time-frequency matrix is obtained. Finally, the improved singular value decomposition (SVD) analysis is used to conduct a noise reduction of the time-frequency matrix. The SVRS is proposed to select the effective singular values. Furthermore, the time-domain feature of the impact signal is obtained by taking the inverse GST transform.
Findings
The simulated and experimental signals are used to verify the superiority of the proposed method over conventional methods. The obtained results show that the proposed method can effectively extract fault features of the rolling element bearing.
Research limitations/implications
This paper mainly discusses the application of GST and SVRS methods to analyze the weak fault feature extraction problem. The next research direction is to explore the application of the Hilbert Huang transform (HHT) and variational modal decomposition (VMD) in the impact feature extraction of rolling bearing.
Originality/value
In the present study, a new SVRS method is proposed to select the number of effective singular values. This paper proposed an effective way to obtain the fault feature in monitoring of rotating machinery.
Details
Keywords
D. Saxena, S.N. Singh, K.S. Verma and Shiv K. Singh
An electrical power system is expected to deliver undistorted sinusoidal, rated voltage and current continuously to the end-users. The problem of power quality (PQ) occurs when…
Abstract
Purpose
An electrical power system is expected to deliver undistorted sinusoidal, rated voltage and current continuously to the end-users. The problem of power quality (PQ) occurs when there is (are) deviation(s) in voltage and/or current which cause(s) failure or mal-operation of the customer's equipments. Various methods are suggested to detect and classify single PQ event in a power system, the performance of such methods to classify composite PQ events is limited. The purpose of this paper is the classification of composite PQ events in emerging power systems.
Design/methodology/approach
This paper proposes an effective method to classify composite PQ events using Hilbert Huang transform (HHT). The performance of probabilistic neural network (PNN) classifier and support vector machine (SVM) classifier to efficiently classify composite PQ events is compared.
Findings
The features extracted from HHT are simple yet effective. SVMs and PNN classifiers are used for PQ classification. It is found that PNN classifier outperforms SVM with the classification accuracy of 100 percent.
Originality/value
Different PQ signals used for analysis are generated by simulating a practical distribution system of an Indian academic institution.
Details