Search results

This paper aims to present the design and experimental tests of an active circulating cooling system for the Experimental Advanced Superconducting Tokamak in-vessel inspection manipulator, which will help the current manipulator prototype to achieve a full-scale in-vessel high temperature environment compatibility.

The high-temperature effects and heat transfer conditions of the manipulator under in-vessel environment were analyzed. An active circulating cooling system was designed and implemented on the manipulator prototype. A simulative in-vessel inspection task in a high temperature environment of 100°C was carried out to evaluate the performance of the active circulating cooling system.

The proposed active circulating cooling system was proved effective in helping the manipulator prototype to achieve its basic in-vessel inspection capability in a high temperature environment. The active circulating cooling system performance can be further improved considering the cooling structure coefficient differences in different manipulator parts.

For the first time, the active circulating cooling system was implemented and tested on a full-scale of the in-vessel inspection manipulator. The experimental data of the temperature distribution inside the manipulator and the operating status of the circulating system were helpful to evaluate the current active circulating cooling system design and provided effective guidance for improving the overall system performance.

The purpose of this study is to present a systematic investigation of the effect of high temperatures on transport characteristics of nitrogen-doped silicon carbide nanowire-based field-effect transistor (SiC-NWFET). The 3C-SiC nanowires can endure high-temperature environments due to their wide bandgap, high thermal conductivity and outstanding physical and chemical properties.

The metal-organic chemical vapor deposition process was used to synthesize in-situ nitrogen-doped SiC nanowires on SiO₂/Si substrate. To fabricate the proposed SiC-NWFET device, the dielectrophoresis method was used to integrate the grown nanowires on the surface of pre-patterned electrodes onto the SiO₂ layer on a highly doped Si substrate. The transport properties of the fabricated device were evaluated at various temperatures ranging from 25°C to 350°C.

The SiC-NWFET device demonstrated an increase in conductance (from 0.43 mS to 1.2 mS) after applying a temperature of 150°C, and then a decrease in conductance (from 1.2 mS to 0.3 mS) with increasing the temperature to 350°C. The increase in conductance can be attributed to the thermionic emission and tunneling mechanisms, while the decrease can be attributed to the phonon scattering. Additionally, the device revealed high electron and hole mobilities, as well as very low resistivity values at both room temperature and high temperatures.

High-temperature transport properties (above 300°C) of 3C-SiC nanowires have not been reported yet. The SiC-NWFET demonstrates a high transconductance, high electron and hole mobilities, very low resistivity, as well as good stability at high temperatures. Therefore, this study could offer solutions not only for high-power but also for low-power circuit and sensing applications in high-temperature environments (∼350°C).

This study aims to investigate whether temperature affects the product quality of exporters and whether the effect is non-linear. More specifically, whether the impact of high temperatures differs from the impact of low temperatures, and whether different types of companies or industries are affected differently.

The paper uses detailed data covering all Chinese exporters from 2000 to 2016 to estimate the effects of temperature on the product quality of export firms. To clarify the relationship between them, the authors use a semi-parametric regression method, trying to test whether there is a non-linear relationship between temperature and the export quality of firms.

The increase in the number of high temperature days significantly reduces the quality of exported products, and this negative effect increases as the temperature rises. High temperature has the most significant negative impact on export quality for firms with low technical complexity, private firms and firms with no intermediate imports and located in historical hot cities. Product quality of both labor-intensive and capital-intensive firms will be affected by heat. High temperatures have the greatest negative impact on the export quality of newly entering products, followed by exiting products, with the least negative impact on persisting product.

To the best of the authors’ knowledge, this paper is the first to examine the impact of temperature on the quality of economic development. The findings of this paper again show that the potential economic impacts of global warming are huge. In addition to some potentially devastating impacts in the future, global warming is already causing imperceptible impacts in the present. Public and economic agents need to fully understand the possible adverse impacts of climate change and take corresponding adaptation measures to cope with global warming.

Fire can severely affect concrete structures and with knowledge of the properties of materials, the damage can be assessed. Aggregate, cement matrix and their interaction are the most important components that affect concrete behaviour at high temperatures. The effect of incorporating recycled concrete aggregate or cementitious materials, namely, cement type and pulverized fly ash, are reviewed to provide a better understanding of their involvement in fire resistance.

More investigation research is needed to understand the fire resistance of such sustainable concrete that was already constructed. The present study illustrates the effect of using recycled concrete aggregate and cementitious materials on the fire resistance of concrete. To do so, a literature review was conducted and relevant data were collected and presented in a simple form. The author's selected research findings, which are related to the presents study, are also presented and discussed.

Recycled concrete aggregate enhances the concrete behaviour at high temperatures when it substitutes the natural aggregate by reasonable substitution (more than 25–30%). It also almost eliminates the possibility of spalling. Moreover, utilizing both supplementary cementitious materials with recycled concrete aggregate can improve the fire resistance of concrete. The incorporation of pulverized fly ash and slag in Portland cement or blended cement can generally keep the mechanical properties of concrete at a higher level after heating to a high temperature.

Recycled concrete aggregate enhances the concrete behaviour at high temperatures when it substitutes the natural aggregate by reasonable substitution (more than 25–30%). It also almost eliminates the possibility of spalling. Moreover, utilizing both supplementary cementitious materials with recycled concrete aggregate can improve the fire resistance of concrete. The incorporation of pulverized fly ash and slag in Portland cement or blended cement can generally keep the mechanical properties of concrete at a higher level after heating to a high temperature.

The influence of using magnetic water instead of tap water in the mechanical properties of the concrete exposed to elevated temperatures was investigated. Two concrete mixes were used and cast with the same ingredients. Tap water was used in the first mix and magnetic water was used in the second mix. A total of 48 specimens were cast and divided as follows: 16 cylinders for the concrete compressive strength test (8 samples for each mix), 16 cylinders for the splitting tensile strength (8 specimens for each mix) and 16 beams to test the influences of magnetized water on the flexural strength of concrete (8 specimens for each mixture). Specimens were exposed to temperatures of (25 °C, 200 °C, 400 °C and 600 °C). The experimental results showed that magnetic water highly affected the mechanical properties of concrete. Specimens cast and curried out with magnetic water show higher compressive strength, splitting tensile strength and flexural strength compared to normal water specimens at all temperatures. The relative strength range between the two types of water used was 110–123% for compressive strength and 110–133% for splitting strength. For the center point loading test, the relative flexural strength range was 118–140%. The use of magnetic water in mixing concrete contribute to a more complete hydration process.

Experimental study was carried out on two concrete mixes to investigate the effect of magnetic water. Mix#1 used normal water as the mixing water, and Mix#2 used magnetic water instead of normal water. After 28 days, all the samples were taken out of the tank and left to dry for seven days, then they were divided into different groups. Each group was exposed to a different temperature where it was placed in a large oven for two hours. Three different tests were carried out on the samples, these tests were concrete compressive strength, flexural strength and splitting tensile strength.

Exposure of concrete to high temperatures had a significant influence on concrete mechanical properties. Specimens prepared using magnetic water showed higher compressive strength at all temperature levels. The use of magnetic water in casting and curing concrete can increase the compressive strength by 23%. Specimens prepared using magnetic water show higher splitting tensile strength at all temperatures up to 33%. The use of magnetic water in casting and curing can strengthen and increase concrete resistance to high temperatures, a significant enhancement in flexural strength at all temperatures was found with a value up to 40%.

Previous research proved the advantages of using magnetic water for improving the mechanical properties of concrete under normal conditions. The potential of using magnetic water in the concrete industry in the future requires conducting extensive research to study the behavior of magnetized concrete under severe conditions to which concrete structures may be subjected to. These days, there are attempts to obtain stronger concrete with high resistance to harsh environmental conditions without adding new costly ingredients to its main mixture. No research has been carried out to investigate the effect of magnetic water on the mechanical properties of concrete exposed to elevated temperature. The main objective of this study is to evaluate the effect of using magnetic water on the mechanical properties of hardened concrete subjected to elevated temperature.

This study aims to develop and validate a new cavitation model that considers thermodynamic effects for high-temperature water flows.

The Rayleigh–Plesset equation and “B-factor” method proposed by Franc are used to construct a new cavitation model called “thermodynamic Zwarte–Gerbere–Belamri” (TZGB) by introducing the thermodynamic effects into the original ZGB model. Furthermore, the viscous term of the Rayleigh–Plesset equation is considered in the TZGB model, and the model coefficients are formulated as a function of temperature. Cavitating flows around the NACA0015 hydrofoil under different water temperatures (25°C, 50°C and 70°C) at the angle of attack of 5° are calculated.

Results of the investigated temperatures show good agreement with the available experimental data. Given that the thermodynamic and viscosity effects are included in the TZGB model and the model coefficients are treated as a function of temperature, the TZGB model shows better performance in predicting the pressure coefficient distribution and length of cavity than the original ZGB cavitation model and other models do. The TZGB model aims to determine the thermodynamic and viscosity effects and perform better than the other models in predicting the mass transfer rate, particularly in high-temperature water.

The TZGB model shows potential in predicting the cavitating flows at high temperature and the computational cost of this model is similar to that of the original ZGB model.

This review paper aims to provide a better understanding of formulation and processing of anisotropic conductive adhesive film (ACF) material and to summarize the significant research and development work for the mechanical properties of ACF material and joints, which helps to the development and application of ACF joints with better reliability in microelectronic packaging systems.

The ACF material was cured at high temperature of 190°C, and the cured ACF was tested by conducting the tensile experiments with uniaxial and cyclic loads. The ACF joint was obtained with process of pre-bonding and final bonding. The impact tests and shear tests of ACF joints were completed with different aging conditions such as high temperature, thermal cycling and hygrothermal aging.

The cured ACF exhibited unique time-, temperature- and loading rate-dependent behaviors and a strong memory of loading history. Prior stress cycling with higher mean stress or stress amplitude restrained the ratcheting strain in subsequent cycling with lower mean stress or stress amplitude. The impact strength and adhesive strength of ACF joints increased with increase of bonding temperature, but they decreased with increase of environment temperature. The adhesive strength and life of ACF joints decreased with hygrothermal aging, whereas increased firstly and then decreased with thermal cycling.

This study is to review the recent investigations on the mechanical properties of ACF material and joints in microelectronic packaging applications.

This paper aims to investigate the influence of high-temperature thermal action on grease performance from the angle of film-forming performance.

A static thermal aging method was used to prepare high-temperature thermal grease samples after high-temperature thermal action. On the basis of optical interference technology, the film-forming characteristics of fresh grease samples and the grease samples after high-temperature thermal action under variable speed and fixed speed conditions were explored.

The decrease in the structural entanglement performance of the grease after short-term high-temperature thermal action makes its film-forming performance better. The mechanism is that the lubricating grease soap fiber entanglement is reduced. Although the continuous high-temperature thermal action can make the grease film-forming performance better, its mechanism is that the soap fiber structure caused by high-temperature thermal action is damaged and is easy to be cut off under the action of shear.

The effect of structural system change on its film formation performance was discussed in combination with the change in grease structure characteristics, and the mechanism of action was revealed.

The increased demand for high-quality, nutritionally rich processed food has led to non-thermal food processing technologies like high pressure processing (HPP), a novel process for microbial inactivation with minimal loss of nutritional and sensory properties. The purpose of this paper is to highlight the impact of HPP on the microbiological, nutritional and sensory properties of food.

Recent research on the role of HPP in maintaining food quality and safety and the impact of process conditions with respect to various food properties have been explored in this paper. Also, the hurdle approach and the effectiveness of HPP on food quality have been documented.

HPP has been verified for industrial application, fulfilling the consumer demand for processed food with minimum nutrition loss at low temperatures. The positive impact of HPP with other treatments is known as the hurdle approach that enhances its impact against microorganism activity and minimizes the effects on nutrition and sensory attributes.

This paper highlights the impact of HPP on various food properties and a good alternative as non-thermal technology for maintaining shelf life, sensory properties and retention of nutrients.