Search results

Occupational safety issues among employees remains a contemporary and omnipresent concern. In developing countries, safety-related problems are amplified, resulting in higher incidences of serious accidents and occupational diseases. This study aims to evaluate employees’ knowledge and attitudes toward occupational health and safety, and how these influence overall occupational health and safety compliance. Ghana’s oil and gas industry provides the contextual backdrop for this research, given it is characterized by high rates of injury.

A positivist and deductive research strategy was used to quantitatively analyze both primary and secondary data sources. A structured survey was administered to industry employees, and multiple linear regression was used to establish the effects of employee’s knowledge and attitude toward occupational health hazards on overall health and safety compliance.

The findings indicate that most employees had both a high level of knowledge and positive attitude toward mitigating occupational health hazards. Moreover, the study reveals that most employees complied with occupational health safety practices. However, the study also reveals that the effect of employees’ knowledge and attitude toward occupational health hazards does not translate into deployment of comprehensive safety practices. Interestingly, female employees were found to be more knowledgeable and compliant with occupational health and safety practices than their male counterparts.

Premised upon the findings, the study recommends: implementation of relevant education and training programs encompassing the proper usage of machinery and equipment, tailored hazard safety training appropriate to specific employee job requirements, effective dissemination of risk information and governance initiatives that enforce strict adherence to correct safety procedures.

The study uniquely examines the influence of employee’s knowledge of health and safety to overall compliance within the oil and gas industry. Cumulatively, the study’s findings and recommendations contribute to improving the occupational health and safety outcomes within the industry.

This study aims to develop an inclusive, multidisciplinary, flexible and organizationally adaptable safety risk management framework, including diversity management, that will be implemented to ensure safety is and remains at the desired level. If the number of incidents and potential incidents that could lead to accidents and their impact rates are to be reduced operationally and administratively, aviation safety risks and sources of risk must be better understood, sources of risk identified, and the safety risk management framework designed in an organization-specific and organization-wide sustainable way. At this point, it is necessary to draw the conceptual framework well and to define the boundaries of the concepts well. In this study, a framework model that can be adapted to the organization is proposed to optimize the management of risks and provide both efficient and effective resource allocation and organizational structure design in its operations and management functions.

The qualitative research method – triple techniques – was deemed appropriate for this study, which aims to identify, examine, interpret and develop the situations of safety management models. In this context, document analysis, business process modeling technique and Delphi techniques from qualitative research methods were used via integration as the methodology of this research.

To manage dynamic civil aviation management activities and business processes effectively and efficiently, the risk management process is the building block of the “Proposed Process Model” that supports the decision-making processes of aviation organizations and managers. This “Framework Conceptual Model” building block also helps build capacity and resilience by enabling continuous development, organizational learning, and flexible structuring.

This research is limited to air transportation and aviation safety management issues. This research is limited specifically to a safety-based risk management framework for the aviation industry. This research may have social implications as source saving, optimum resource use and capacity building will make a contribution to society and add value besides operational and practical implementation.

This research may contribute to more safe operations and functions in the aviation industry.

Management and academia may gain considerable support from this research to manage their safety risks via a corporate-tailored risk management framework, both improving resilience and developing corporate capacity. With this model presented, decision-makers will have a guiding structure that can optimally manage the main risk types that may be encountered in the safety risk in the fields of suppliers, manufacturers, demand changes, logistics, information management, environmental, legal and regulatory. Existing studies in the literature are generally in the form of algorithms and cannot be used as a decision-making support tool. This model aims to fill the gap in the literature. In addition, added value may be created by applying this model to optimum management safety risks in the real aviation industry and its related sectors.

This study explores whether the unique organizational form of family firms helps to mitigate the negative effects caused by the announcement of product recalls.

The authors use an event study, for a sample of 2,576 product recalls in the United States (US) automobile industry, between January 2010 and June 2021.

The authors found that stock market's reaction to a product recall announcement is less negative for family firms. This superior performance is partially driven by the family firms' long-term investment horizons and higher strategic emphasis on product quality. However, the relationship between family ownership and cumulative abnormal returns around product recall announcements is nonlinear as the impact of family ownership starts by being positive but becomes negative for higher levels of family ownership. The authors also find that family firm's chief executive officer (CEO) and managerial ownership influence positively the stock market reaction to product recall announcements.

This work has several implications for family firms' management as well as for investors and financial analysts. First, as higher managerial ownership is associated with a greater emphasis on product quality, decreasing stock market losses when a product recall occurs, family firms should consider increasing equity-based compensation. Second, as there seems to exist an optimal proportion of family ownership, family firms should consider the risks of increasing too much their ownership share. Third, investors and financial analysts can use the results in the study to help them in their investment and trading decisions in the stock market.

The authors extend the knowledge of product recalls by studying the under-researched role of the flexible, internally focused culture of family businesses on the stock market reaction to product recalls.

Studies showed that construction digitalisation could prevent or mitigate accidents rate on sites. Digitalisation applications may prevent or mitigate building project collapse (BPC) but with some encumbrances, especially in developing countries. There is a paucity of research on digital technologies application to prevent or mitigate BPC in Nigeria. Thus, the research aims to explore the perceived barriers that may hinder digital technologies from preventing or mitigating building collapse and recommend measures to improve technology applications during development.

The study is exploratory because of the unexplored approach. The researchers collected data from knowledgeable participants in digitalisation and building collapse in Nigeria. The research employed a phenomenology approach and analysed collected data via a thematic approach. The study achieved saturation at the 29th interviewee.

Findings show that lax construction digitalisation implementation, absence of regulatory framework, lax policy, unsafe fieldworkers' behaviours, absence of basic infrastructure, government attitude, hesitation to implement and high technology budget, especially in developing countries, are threats to curbing building collapse menace via digitalisation. The study identified technologies relevant to preventing or mitigating building collapse. Also, it proffered measures to prevent or mitigate building collapse via improved digital technology applications during development.

This research contributes to the construction digitalisation literature, especially in developing countries, and investigates the perceived barriers that may hinder digital technologies usage in preventing or mitigating building collapse in Nigeria.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Amid rapid technological progress, the construction industry is embracing Construction 4.0, redefining work practices through emerging technologies. However, the implications of Construction 4.0 technologies to enhancing well-being are still poorly understood. Particularly, the challenge lies in selecting technologies that critically contribute to well-being enhancement. Therefore, this study aims to evaluate the implications of Construction 4.0 technologies to enhancing well-being.

A list of Construction 4.0 technologies was identified from a national strategic plan on Construction 4.0, using Malaysia as a case study. Fourteen construction industry experts were selected to evaluate the implications of Construction 4.0 technologies on well-being using fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The expert judgment was measured using linguistic variables that were transformed into fuzzy values. Then, the collected data was analyzed using the following analyses: fuzzy TOPSIS, Pareto, normalization, sensitivity, ranking performance and correlation.

Six Construction 4.0 technologies are critical to enhancing well-being: cloud & real-time collaboration, big data & predictive analytics, Internet of Things, building information modeling, autonomous construction and augmented reality & virtualization. In addition, artificial intelligence and advanced building materials are recommended to be implemented simultaneously as a very strong correlation exists between them.

The novelty of this study lies in a comprehensive understanding of the implications of Construction 4.0 technologies to enhancing well-being. The findings can assist researchers, industry practitioners and policymakers in making well-informed decisions to select Construction 4.0 technologies when targeting the enhancement of the overall well-being of the local construction industry.

Lean management tools are becoming increasingly applied in different types of organizations around the world. These tools have shown their significant contribution to improving business performance. In this vein, the purpose of this paper is to examine the influence of lean management on both occupational safety and operational excellence in Tunisian companies.

A survey was conducted among Tunisian companies, and it resulted in the collection of 62 responses that were analyzed using the software SPSS. In addition, a conceptual model linking the practices of the three basic concepts was designed to highlight the hypotheses of the research. Subsequently, factor analysis and structural equation method analysis were conducted to assess the validation of the assumptions.

The results obtained have shown that lean management has a significant impact on occupational safety. Similarly, occupational safety has a significant impact on operational excellence. However, lean management does not have a significant impact on operational excellence.

This work highlighted the involvement of small and medium-sized enterprise’s managers from emerging economies in the studied concepts’ practices. Likewise, it testified to the impacts of lean management on occupational safety and operational excellence in the Tunisian context.

Despite the significance of the construction industry to the nation's economic growth, there is empirical evidence that the sector is lagging behind other industries in terms of productivity growth. The need for improvements inspired the industry's stakeholders to consider using emerging technologies that support the enhancement. This research aims to report augmented reality applications essential for contractors' productivity improvement.

This study systematically reviewed academic journals. The selection of journal articles entailed searching Scopus and Web of Science databases. Relevant articles for reviews were identified and screened. Content analysis was used to classify key applications into six categories. The research results were limited to journal articles published between 2010 and 2021.

Augmented reality can improve construction productivity through its applications in assembly, training and education, monitoring and controlling, interdisciplinary function, health and safety and design information.

The research provides a direction for contractors on key augmented reality applications they can leverage to improve their organisations' productivity.

As public awareness of the concept of sustainable development has increased, a new investor market has appeared. These investors will only make investments in sustainable financial instruments. Yet, how corporate managers can effectively exploit this new financing concept to make their companies risk resilient remains unaddressed. This study, a conceptual research, aims to examine the impact of sustainable finance (SF) on business risk resilience (BR) and the impact of SF on risk management infrastructure (RI). It also addresses the impact of RI on BR and the mediating effect of the former between SF and BR in the corporate world. Finally, this research explores the moderating effect of managerial capability (MC) and firm technology-focused innovation capability (IC) between SF and RI.

This study incorporates both theoretical and empirical works in the sustainability, innovation, risk management and HRM fields. Afterwards, it constructs a conceptual model alongside suppositions that can be tested in further studies.

This study proposes that SF will enhance BR and RI. Moreover, RI will promote BR and positively intervene between SF and BR. Furthermore, MC and IC will reinforce the SF–RI impact such that the SF–RI impact will be strengthened for companies whose MCs and ICs are high than low.

This research affords suggestions for researchers in multidisciplinary fields. It reinforces BR and RI by introducing SF, MC and IC as tactical devices. It also serves as a reference point for forthcoming academics to investigate this conceptual model, empirically, in diverse industries worldwide.

Practical lessons for finance, investment and risk managers, as well as corporate investors are discussed.

This study provides a new research model that demonstrates how SF can be exploited to promote BR and build RI. It also shows how RI can bolster BR and how RI can connect SF to BR. This new model also exhibits how MC and IC moderate the impacts of SF and RI. Thus, it attempts to advance existing knowledge and theoretical frameworks.