Search results

The purpose of this paper is to investigate the effect of doping element on the microwave absorption performance of hexagonal nano boron nitride (h-nBN)-reinforced basalt fabric (BF)/epoxy composites. A new type of hybrid composite that will be produced by the use of boron nitride as an additive that leads to increased radar absorption capability will be developed and a new material that can be used in aeronautical radar applications.

This study is focused on the microwave absorption properties of h-nBN doped basalt fabric-reinforced epoxy composites. Basalt fabric (BF)/epoxy composites (pure composites) and the BF/h-nBN (1 Wt.% h-nBN doped composites) hybrid composites were fabricated by vacuum infusion method. Phase identification of the composites were performed using X-ray diffraction (XRD), the 2θ scan range was from 10 to 60 with the scanning speed of 3°/min and surface morphologies of the composites were investigated using scanning electron microscopy (SEM). Microwave properties of samples were investigated through transmission/reflection measurements in Agilent brand 2-Port PNA-L Network Analyzer in the frequency range of 3–18 GHz. The prepared sample is positioned between two horn antennas with and without metal plate.

Experimental results show that h-nBN doped composite was synthesized successfully and the produced hexagonal nano boron nitride-added fiber laminated composite material has good absorption behavior when they are used with metallic sheets and good for isolation applications at many points in the 3–18 GHz band.

This paper will contribute to the literature on the use of basalt fabric, which are new types of fibers, and hexagonal nano boron nitride and the effects of boron nitride on radar absorption properties of composite material. It presents detail characterization of each composite by using XRD and scanning electron microscopy.

The purpose of this paper is to develop an effective approach to significantly improve the thermomechanical properties of shape memory polymer (SMP) nanocomposites that show fast thermally responsive shape recovery.

Hexagonal boron nitrides (h-BNs) were incorporated into polymer matrix in an attempt to improve the thermal conductivity and thermally responsive shape recovery behaviour of SMP, respectively. Thermally actuated shape recovery behaviour was recorded and monitored instrumentally.

The results show that both glass transition temperature (T_g) and thermomechanical properties of the SMP nanocomposites have been progressively improved with increasing concentration of h-BNs. Analytical results also suggest that the fast-responsive recovery behaviour of the SMP nanocomposite incorporated with h-BNs was due to the increased thermal conductivity.

A simple way for fabricating SMP nanocomposites with enhanced thermally responsive shape recovery based on the incorporation of h-BNs was developed.

The outcome of this study may help fabrication of SMP nanocomposites with fast responsive recovery behaviour.

This paper aims to investigate the effect of hexagonal boron nitride (hBN) nanoparticles on extreme pressure (EP) properties when used as an additive in lubricating oil.

The nano-oil was prepared by dispersing an optimal composition of 0.5 vol. per cent of 70 nm hBN in SAE 15W-40 diesel engine oil using a sonication technique. The tribological testing was performed using a four-ball tribometer according to the ASTM standard.

It was found that the nano-oil has a potential to decelerate the seizure point on the contact surfaces, where higher EP can be obtained. More adhesive wear was observed on the worn surfaces of ball bearing lubricated with SAE 15W-40 diesel engine oil as compared with the nano-oil lubrication.

The results of the experimental studies demonstrated the potential of hBN as an additive for improving the load-carrying ability of lubricating oil.

This study aims to introduce a novel technique which helped in quantifying the wear performance of a roller chain which was lubricated by using the palm oil-based hexagonal boron nitride (hBN) nanoparticles (nano-biolubricant).

The efficiency of the nano-biolubricant was evaluated by using a custom-made roller chain tribometer, at different resistance torque values at a constant speed and running time. Prior to the test, 2 different lubrication conditions were applied. The mass loss and elongation behaviour of a roller chain was selected as a degradation metric for monitoring the amount of the chain wear. The predominant wear mechanism of a roller chain was identified by surface morphological analysis.

Regardless of the lubrication conditions, the wear performance of the roller chain was significantly increased, at increasing resistance torque values. Higher wear was noted when the roller chain was lubricated using a nano-biolubricant, however, the wear curve showed a promising high chain life. The predominant wear mechanism involved is abrasive wear.

Although an increase in the elongation during running is based on the wear between the pins and roller, none of the earlier studies quantified the wear performance of a roller chain under differing lubrication conditions. Hence, for bridging the gap, this study described a new method for measuring the wear performance of the roller chain which was lubricated using the palm oil-based hBN nanoparticles or a nano-biolubricant.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2020-0061/

The purpose of this paper is to investigate applicability of hexagonal boron nitride (h-BN) powder as a solid lubricant additive in coconut oil and to determine the tribological behavior of PEEK rubbed with DIN2080 tool steel, under prepared green lubricating condition.

In this study, tiribological performance of PEEK against the DIN2080 tool steel is investigated with green lubricant. Coconut oil was used as green lubricant and 4 per cent wt. h-BN powder was added as lubricant additive into the coconut oil. Reciprocal pin-plate tribological test were applied under dry, coconut oil and coconut oil+h-BN lubrication condition. Friction coefficients were recorded and wear behavior of the samples investigated by mass loss measurement and topographical inspection of wear track by optical profilometer.

Using coconut oil as lubricant provided 80 per cent reduction of friction coefficient and 33.4 per cent reduction of wear rate. Addition of h-BN into the coconut oil provide 84 per cent reduction of friction coefficient and 56 per cent reduction of wear rate. The results showed that vegetable oil is promising lubricant for sustainable manufacturing. h-BN serves to increase lubricant performance and decrease wear of the surfaces.

Petrochemical lubricants are one of the major sources of environmental pollution and health hazards. Development and use of environmental and health friendly lubricants support sustainability and reduce wear, friction and energy consumption. With this consciousness, recent studies have focused on green tribology and green lubricants such as vegetable oils, ionic liquid bio-lubricants and bio-based polymers.

In literature study coconut oil was proposed as green lubricant while h-BN powder was proposed as solid lubricant. However, applicability of h-BN powder in coconut oil has not been explored yet. Moreover, wear and friction property of PEEK material with DIN 2080 tool steel pair surface has not been studied yet with green lubricants.

The purpose of this paper is to investigate the effect of doping element on the structural, thermal properties, mechanical performance and the failure mechanism of hexagonal nano boron nitride (h-BN)-reinforced basalt fabric (BF)/epoxy composites produced by hand lay-up and vacuum bagging technique. h-BN particles doped to composite materials increased the tensile, bending and impact strength of the composite at certain rates while 1 Wt. % h- BN addition shows the highest tensile and flexural strength.

The epoxy resin was doped with h-BN nanopowder at the certain rates (0, 1, 2 and 4 Wt.%) and the epoxy: hardener ratios used in the study were selected as 80%: 20% by weight. Then, with the aid of a roller by hand lay-up method, a mixture of epoxy + hardeners containing nanoparticles and nanoparticle-free were fed onto BFs, 12 layers of each dimension 30 cm × 30 cm. The surplus epoxy resin was moved away from the composite sheets using the vacuum bagging process and left to cure at room temperature for 24 h. ASTM D3039 for tensile, D7264 for three-point bending and D256 for Izod impact test were performed for the mechanical tests. After the tensile test, the morphologies of the fracture surface were examined with a stereomicroscope and various failure mechanisms are highlighted.

In this study, a series of basalt/epoxy composites with h-BN nanopowders have been prepared to identify the effect of filler ratio on mechanical properties. It has been known from the results of mechanical experiments that the addition of h-BN improves the mechanical performance of materials at a certain rate. The tensile and flexural strengths of h-BN doped composites, increase for concentrations of 1 Wt.% h-BN, but decrease with the increasing content of it. The basalt/epoxy resin composite with higher mechanical properties could be a potential material in the automotive and aerospace industries.

The aim of this study is to contribute to literature within the context of this new combination of composites and their mechanical properties, failure mechanisms. It presents detailed characterization of each composite by using X-ray differaction (XRD), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy.

The purpose of this paper is to investigate the effect of hexagonal boron nitride (h-BN) and poly (phenyl p-hydroxybenzoate) (PHBA) on improving the torsional tribological behavior of polytetrafluoroethylene (PTFE).

This paper investigates the torsional tribological behavior of PTFE composites filled with h-BN and PHBA under different angular displacements with a plane-on-plane torsional friction tester. The worn surface of PTFE composites was investigated by using a scanning electron microscope.

The shape of T–Θ curves of PTFE composites was influenced by both content fillers and torsional angule. The material with a higher coefficient of sliding friction exhibited the larger torsional angle under which the torsional regime transited from a partial slip to a gross slip. PTFE composites filled with 20 weight per cent PHBA and 10 weight per cent h-BN showed the best anti-wear properties. The specific wear rate of composites exhibits a negative correlation with material hardness. The wear volume loss presents a positive correlation with friction dissipation energy. The specific wear rate of all composites decreased with increasing torsional angle. The dominant wear mechanism of pure PTFE was adhesive wear. The slight plastic flow and plowing occurred on the worn surfaces of PTFE composites because of the higher hardness of composites and the lubrication of h-BN particles with layer crystal structure.

This paper put forward a kind of PTFE composite with low torsional wear rate, which can be used in the sliding slewing bearing or the center plate of a bogie.

The absorption of moisture/water can affect the mechanical and thermal properties of polymers and polymer composites as many polymers, mainly polyamide thermoplastics, are sensitive to environmental humidity and can absorb a large amount of moisture. This paper investigates the effect of water molecules' absorption on mechanical and thermal properties of polyamide6/hexagonal boron nitride (PA6/h-BN) composites.

The PA6/h-BN composites were exposed to an open environment and water for 15 days to analyse the effect of humidity/water molecules' absorption on mechanical and thermal properties. The tensile strength, hardness and impact strength of materials were measured and compared. The scanning electron microscopy (SEM), x-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses were utilized to see the influence of water absorption on microstructure, crystallinity and glass transition temperatures.

After exposing materials to an open environment and water, the tensile strength and hardness were found to decline, while improvement in impact strength was noticed. SEM characterization revealed the formation of voids/pockets in water-immersed materials. DSC analysis revealed the loss in glass transition temperatures, and XRD analysis revealed the loss in crystallinity of water-immersed materials.

Environmental conditions vary according to the geographical areas, and it varies in many countries throughout the year. Polyamides are sensitive to the environmental humidity and can absorb a large amount of moisture from the environment. It becomes necessary to test these materials in their original working conditions, and sometimes it is mandatory to see the effects of extreme environmental conditions on a component. In this article, efforts have been made to investigate the influence of extreme humidity/water conditions on thermo-mechanical properties of PA6/h-BN composites.

Production Engineers have been continually seeking to find new and improved ways of converting an unmachined component into its finished design. Much of their time is spent investigating the contribution that new cutting tool materials and coolants could give them in the production of their components. In the field of production grinding more and more attention is being focused on the use of Superabrasives and in particular on ‘Cubic Boron Nitride’ for the grinding of ferrous materials. The purpose of this paper is to discuss the use of ‘Cubic Boron Nitride’ (C.B.N.) in the production grinding field and how the Engineer should approach the application of this highly versatile abrasive.