Search results
1 – 10 of 77József Pávó and Antal Gasparics
Fluxset type eddy current probes are used for detecting discontinuities in conducting materials. The measurements obtained by such probes can be used for the reconstruction of the…
Abstract
Fluxset type eddy current probes are used for detecting discontinuities in conducting materials. The measurements obtained by such probes can be used for the reconstruction of the parameters of the detected discontinuity if the output signal of the measurement is uniquely related to the measured field. In this paper a calibration method is presented for the establishment of the relation between the measured magnetic field and the output signal of the probe. The relation is obtained by the optimisation of the parameters of the mapping between the calculated magnetic field distribution and the measured output signal. The magnetic field distribution due to the interaction of the probe and an infinitesimally thin crack located in a conducting plate is calculated numerically by the solution of a boundary integral equation.
Details
Keywords
André Buchau, Wolfgang M. Rucker, Uwe Wössner and Martin Becker
The purpose of this paper is to present an application of augmented reality (AR) in the context of teaching of electrodynamics. The AR visualization technique is applied to…
Abstract
Purpose
The purpose of this paper is to present an application of augmented reality (AR) in the context of teaching of electrodynamics. The AR visualization technique is applied to electromagnetic fields. Carrying out of numerical simulations as well as preparation of the AR display is shown. Presented examples demonstrate an application of this technique in teaching of electrodynamics.
Design/methodology/approach
The 3D electromagnetic fields are computed with the finite element method (FEM) and visualized with an AR display.
Findings
AR is a vivid method for visualization of electromagnetic fields. Students as well as experts can easily connect the characteristics of the fields with the physical object.
Research limitations/implications
The focus of the presented work has been on an application of AR in a lecture room. Then, easy handling of a presentation among with low‐hardware requirements is important.
Practical implications
The presented approach is based on low‐hardware requirements. Hence, a presentation of electromagnetic fields with AR in a lecture room can be easily done. AR helps students to understand electromagnetic field theory.
Originality/value
Well‐known methods like FEM and AR have been combined to develop a visualization technique for electromagnetic fields, which can be easily applied in a lecture room.
Details
Keywords
The purpose of this paper is to provide a review of recent progress in the development of medical microrobots.
Abstract
Purpose
The purpose of this paper is to provide a review of recent progress in the development of medical microrobots.
Design/methodology/approach
The paper first considers some of the critical aspects of medical microrobot design and then illustrates the present state of development through examples of prevailing research.
Findings
This paper shows that medical microrobot developments are at an early stage and involve a disparate family of technologies and disciplines, such as MEMS, nanotechnology, biomimetics and hydrodynamics. Critical design issues include power sources, propulsion and location, and many different schemes have been proposed. These are the topic of a growing body of academic research.
Originality/value
This paper provides a detailed insight into the present‐day state of medical microrobot technology and development.
Details
Keywords
V. Nemkov, R. Ruffini, R. Goldstein, J. Jackowski, T.L. DeWeese and R. Ivkov
The purpose of this paper is to continue studies previously reported with the primary focus of optimizing an inductor design. The potential benefits of hyperthermia for cancer…
Abstract
Purpose
The purpose of this paper is to continue studies previously reported with the primary focus of optimizing an inductor design. The potential benefits of hyperthermia for cancer therapy, particularly metastatic cancers of the prostate, may be realized by the use of targeted magnetic nanoparticles that are heated by alternating magnetic fields (AMFs).
Design/methodology/approach
To further explore the potential of this technology, a high‐throughput cell culture treatment system is needed. The AMF requirements for this research present challenges to the design and manufacture of an induction system because a high flux density field at high frequency must be created in a relatively large volume. Additional challenges are presented by the requirement that the inductor must maintain an operating temperature between 35 and 39°C with continuous duty operation for 1 h or longer. Results of simulation and design of two devices for culture samples and for in vitro tests of multiple samples in uniform field are described.
Findings
The inductor design chosen provides a uniform distribution of relatively high magnetic field strength while providing an optimal reduction in the voltage and power requirement. Through development of design and selection of magnetic concentrator, the exposure of the cell cultures to the heat generated by the inductor is minimized.
Originality/value
This method of generating uniform high AC magnetic fields in a large volume is beneficial for the study of hyperthermia in cells for a high throughput, necessary for cancer treatment research.
Details
Keywords
Suqi Liu and Jianping Tan
This paper aims to find an approach that achieves constant output power and transfer efficiency in an open space, such as charging pads.
Abstract
Purpose
This paper aims to find an approach that achieves constant output power and transfer efficiency in an open space, such as charging pads.
Design/methodology/approach
In this study, a topology of the five-coil system including two transmitting coils is presented. Also, in a fixed-frequency mode and an open space, this study focuses on the two transmitting coils to achieve the uniform magnetic field and ultimately, attain the constant output power and transfer efficiency.
Findings
In a fixed-frequency mode and an open space, the constant output power and transfer efficiency is then achieved in experiments by inserting the relay loop into the uniform magnetic field.
Practical implications
An approach that achieves constant output power and transfer efficiency in an open space. The topology of the five-coil magnetically coupled resonant-wireless power transfer (MCR-WPT) system shows prospective value for various applications, which could be used at designing of wireless battery charger dedicated for cars or mobile phones.
Originality/value
By comparing the simulation and experimental results, the topology can be optimized in the transmission performance by itself. By doing so, the constant output power and transfer ef?ciency are achieved in the constant frequency mode.
Details
Keywords
Martin Christopher Mapley, Geoff Tansley, Jo P. Pauls, Shaun D. Gregory and Andrew Busch
Additive manufacturing (AM) techniques have been developed to rapidly produce custom designs from a multitude of materials. Bonded permanent magnets (PMs) have been produced via…
Abstract
Purpose
Additive manufacturing (AM) techniques have been developed to rapidly produce custom designs from a multitude of materials. Bonded permanent magnets (PMs) have been produced via several AM techniques to allow for rapid manufacture of complex geometries. These magnets, however, tend to suffer from lower residual induction than the industry standard of injection moulding primarily due to the lower packing density of the magnetic particles and secondly due to the feedstock consisting of neodymium-iron-boron (Nd-Fe-B) powder with isotropic magnetic properties. As there is no compaction during most AM processes, increasing the packing density is very difficult and therefore the purpose of this study was to increase the magnetic properties of the PMs without increasing the part density.
Design/methodology/approach
Accordingly, this research investigates the use of anisotropic NdFeB feedstock coupled with an in-situ alignment fixture into an AM process known as selective laser sintering (SLS) to increase the magnetic properties of AM magnets. A Helmholtz coil array was added to an SLS machine and used to expose each powder layer during part fabrication to a near-uniform magnetic field of 20.4 mT prior to consolidation by the laser.
Findings
Permeagraph measurements of the parts showed that the alignment field introduced residual induction anisotropy of up to 46.4 ± 2.2% when measured in directions parallel and perpendicular to the alignment field. X-ray diffraction measurements also demonstrated a convergence of the orientation of the crystals when the magnets were processed in the presence of the alignment field.
Originality/value
A novel active alignment fixture for SLS was introduced and was experimentally shown to induce anisotropy in bonded PMs. Thus demonstrating a new method for the enhancement in energy density of PMs produced via AM methods.
Details
Keywords
Suqi Liu and Yuping Liu
The impedance compensation approaches have been adopted to achieve the maximum output power and transfer efficiency in many magnetic coupling resonance wireless power transfer…
Abstract
Purpose
The impedance compensation approaches have been adopted to achieve the maximum output power and transfer efficiency in many magnetic coupling resonance wireless power transfer projects. However, it remains a challenge to obtain the constant output power and transfer efficiency in a fixed-frequency mode during variations in transfer distance and orientation of the coils. In this paper, using two series transmitting coils to achieve the constant output power and transfer efficiency is used.
Design/methodology/approach
First, the circuit model is established and transfer characteristics are studied. Second, using the two series transmitting coils to achieve the constant output power and transfer efficiency is investigated. Finally, the experimental system is designed; it can optimize the transfer performances by itself; the constant output power and transfer efficiency are achieved in the fixed-frequency mode.
Findings
When the receiving coil moves between the two series transmitting coils, the tolerance of the output power and transfer efficiency is less than 5 per cent.
Research limitations/implications
When a receiving coil is placed between the two series transmitting coils, there are space limits. The receiving coil only shifts between the two transmitting coils.
Practical implications
However, the rail guide vehicle may achieve constant output power and transfer efficiency when it moves on the rail guide. So, this topology may provide a practical solution.
Originality/value
In this research, the three-coil MCR-WPT system including two series transmitting coils is presented. In a fixed-frequency mode, the constant output power and transfer efficiency is achieved in experiments during variations in transfer distance and orientation of the coils. The fluctuation of the output power and transfer efficiency is less than 5 per cent.
Details
Keywords
Huachen Zhu, Zhenghong Qian, Jiaofeng Zhang, Yucheng Sun, Ru Bai and Jianguo Zhu
It has been noted that the spin-valve sensor exhibits lower sensitivity with higher temperature because of the variation of GMR ratio, which could lead to the measurement error in…
Abstract
Purpose
It has been noted that the spin-valve sensor exhibits lower sensitivity with higher temperature because of the variation of GMR ratio, which could lead to the measurement error in applications where working temperature changes largely over seasons or times. This paper aims to investigate and compensate the temperature effect of the spin-valve sensor.
Design/methodology/approach
A spin-valve sensor is fabricated based on microelectronic process, and its temperature relevant properties are investigated, in which the transfer curves are acquired within a temperature range of −50°C to 125°C with a Helmholtz coil and temperature chamber.
Findings
It is found that the sensitivity of spin-valve sensor decreases with temperature linearly, where the temperature coefficient is calculated at −0.25 %/°C. The relationship between sensitivity of spin-valve sensor and temperature is well-modeled.
Originality/value
The temperature drift model of the spin-valve sensor’s sensitivity is highly correlated with tested results, which could be used to compensate the temperature influence on the sensor output. A self-compensation sensor system is proposed and built based on the expression modeled for the temperature dependence of the sensor, which exhibits a great improvement on temperature stability.
Details
Keywords
Aditi, Supriyo Das and Ram Gopal
Si-based micro electro mechanical systems (MEMS) magnetometer does not require specialized magnetic materials avoiding magnetic hysteresis, ease in fabrication and low power…
Abstract
Purpose
Si-based micro electro mechanical systems (MEMS) magnetometer does not require specialized magnetic materials avoiding magnetic hysteresis, ease in fabrication and low power consumption. It can be fabricated using the same processes used for gyroscope and accelerometer fabrication. The paper reports the dicing mechanism for the released MEMS xylophone magnetic sensor fabricated using wafer bonding technology and its characterization in ambient pressure and under vacuum conditions. The purpose of this paper is to dice the wafer bonded Si-magnetometer in a cost-effective way without the use of laser dicing and test it for Lorentz force transduction.
Design/methodology/approach
A xylophone bar MEMS magnetometer using Lorentz force transduction is developed. The fabricated MEMS-based xylophone bars in literature are approximately 500 µm. The present work shows the released structure (L = 592 µm) fabricated by anodic bonding technique using conducting Si as the structural layer and tested for Lorentz force transduction. The microstructures fabricated at the wafer level are released. Dicing these released structures using conventional diamond blade dicing may damage the structures and reduce the yield. To avoid the problem, positive photoresist S1813 was filled before dicing. The dicing of the wafer, filled with photoresist and later removal of photoresist post dicing, is proposed.
Findings
The devices realized are stiction free and straight. The dynamic measurements are done using laser Doppler vibrometer to verify the released structure and test its functionality for Lorentz force transduction. The magnetic field is applied using a permanent magnet and Helmholtz coil. Two sensors with quality factors 70 and 238 are tested with resonant frequency 112.38 kHz and 114.38 kHz, respectively. The sensor D2, with Q as 238, shows a mechanical sensitivity of 500 pm/Gauss and theoretical Brownian noise-limited resolution of 53 nT/vHz.
Originality/value
The methodology and the study will help develop Lorentz force–based MEMS magnetometers such that stiction-free structures are released using wet etch after the mechanical dicing.
Details
Keywords
Fatima Barrarat, Karim Rayane, Bachir Helifa, Samir Bensaid and Iben Khaldoun Lefkaier
Detecting the orientation of cracks is a major challenge in the development of eddy current nondestructive testing probes. Eddy current-based techniques are limited in their…
Abstract
Purpose
Detecting the orientation of cracks is a major challenge in the development of eddy current nondestructive testing probes. Eddy current-based techniques are limited in their ability to detect cracks that are not perpendicular to induced current flows. This study aims to investigate the application of the rotating electromagnetic field method to detect arbitrary orientation defects in conductive nonferrous parts. This method significantly improves the detection of cracks of any orientation.
Design/methodology/approach
A new rotating uniform eddy current (RUEC) probe is presented. Two exciting pairs consisting of similar square-shaped coils are arranged orthogonally at the same lifting point, thus avoiding further adjustment of the excitation system to generate a rotating electromagnetic field, eliminating any need for mechanical rotation and focusing this field with high density. A circular detection coil serving as a receiver is mounted in the middle of the excitation system.
Findings
A simulation model of the rotating electromagnetic field system is performed to determine the rules and characteristics of the electromagnetic signal distribution in the defect area. Referring to the experimental results aimed to detect artificial cracks at arbitrary angles in underwater structures using the rotating alternating current field measurement (RACFM) system in Li et al. (2016), the model proposed in this paper is validated.
Originality/value
CEDRAT FLUX 3D simulation results showed that the proposed probe can detect cracks with any orientation, maintaining the same sensitivity, which demonstrates its effectiveness. Furthermore, the proposed RUEC probe, associated with the exploitation procedure, allows us to provide a full characterization of the crack, namely, its length, depth and orientation in a one-pass scan, by analyzing the magnetic induction signal.
Details