Search results

The present study provides a comprehensive review of the advancements in five active heating modes for cold-proof clothing as of 2021. It aims to evaluate the current state of research for each heating mode and identify their limitations. Further, the study provides insights into the optimization of intelligent temperature control algorithms and design considerations for intelligent cold-proof clothing.

This article presents a classification of active heating systems based on five different heating principles: electric heating system, solar heating system, phase-change material (PCM) heating system, chemical heating system and fluid/air heating system. The systems are analyzed and evaluated in terms of heating principle, research advancement, scientific challenges and application potential in the field of cold-proof clothing.

The rational utilization of active heating modes enhances the thermal efficiency of cold-proof clothing, resulting in enhanced cold-resistance and reduced volume and weight. Despite progress in the development of the five prevalent heating modes, particularly with regard to the improvement and advancement of heating materials, the current integration of heating systems with cold-proof clothing is limited to the torso and limbs, lacking consideration of the thermal physiological requirements of the human body. Additionally, the heating modes of each system tend to be uniform and lack differentiation to meet the varying cold protection needs of various body parts.

The effective application of multiple heating modes helps the human body to maintain a constant body temperature and thermal equilibrium in a cold environment. The research of heating mode is the basis for realizing the temperature control of cold-proof clothing and provides an effective guarantee for the future development of the intelligent algorithms for temperature control of non-uniform heating of body segments.

The integration of multiple heating modes ensures the maintenance of a constant body temperature and thermal balance for the wearer in cold environments. The research of heating modes forms the foundation for the temperature regulation of cold-proof clothing and lays the groundwork for the development of intelligent algorithms for non-uniform heating control of different body segments.

The present article systematically reviews five active heating modes suitable for use in cold-proof clothing and offers guidance for the selection of heating systems in future smart cold-proof clothing. Furthermore, the findings of this research provide a basis for future research on non-uniform heating modes that are aligned with the thermal physiological needs of the human body, thus contributing to the development of cold-proof clothing that is better suited to meet the thermal needs of the human body.

The purpose of this paper is to investigate numerically mixed convection of Al₂O₃-water nanofluids flowing through a horizontal ventilated cavity heated from below by a temperature varying sinusoidally along its lower wall. The simulations focus on the effects of different key parameters, such as Reynolds number (200 ≤ Re ≤ 5,000), nanoparticles’ concentration (0 ≤ ϕ ≤ 0.1) and phase shift of the heating temperature (0 ≤ γ ≤ π), on flow and thermal patterns and heat transfer performances.

The Navier–Stokes equations describing the nanofluid flow were discretized using a finite difference technique. The vorticity and energy equations were solved by the alternating direction implicit method. Values of the stream function were obtained by using the point successive over-relaxation method.

The simulations were performed for two modes of imposed external flow (injection and suction). The main findings are that the dynamical and thermal fields are affected by the parameters Re, ϕ, γ and the applied ventilation mode; the addition of nanoparticles leads to an improvement of heat transfer rate and an increase of mean temperature inside the enclosure; the heat exchange performance and the better cooling are more pronounced in suction mode; the phase shift of the heating temperature may lead to periodic solutions for weaker values of Re and contributes to an increase or a decrease of heat transfer depending on the value of ϕ and the convection regime.

To the best of the authors’ knowledge, the problem of mixed convection of a nanofluid inside a vented cavity using the injection or suction technics and submitted to non-uniform heating conditions has not been treated so far.

The Reinforced Concrete(RC) elements are known to perform well during exposure to elevated temperatures. Hence, RC elements are widely used to resist the extreme heat developing from accidental fires and other industrial processes. In both of the scenarios, the RC element is exposed to elevated temperatures. However, the primary differences between the fire and processed temperatures are the rate of temperature increase, mode of exposure and exposure durations. In order to determine the effect of two heating modalities, RC beams were exposed to processed temperatures with slow heating rates and fire with fast heating rates.

In the present study, RC beam specimens were exposed to 200 °C, to 800 °C temperature at 200 °C intervals for 2 h' duration by adopting two heating modes; Fire and processed temperatures. An electrical furnace with low-temperature increment and a fire furnace with standard time-temperature increment is adapted to expose the RC elements to elevated temperatures.

It is observed from test results that, the reduction in load-carrying capacity, first crack load, and thermal crack widths of RC beams exposed to 200 °C, and 600 °C temperature at fire is significantly high from the RC beams exposed to the processed temperature having the same maximum temperature. As the exposure temperature increases to 800 °C, the performance of RC beams at all heating modes becomes approximately equal.

In this work, residual performance, and failure modes of RC beams exposed to elevated temperatures were achieved through two different heating modes are presented.

The purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition.

To reduce eddy current loss and improve heating efficiency, the structure of a pipe-type power-frequency electromagnetic heating device was optimized. Based on the maximum load flow formula, a parallel excitation winding structure is designed, and the distribution of electromagnetic field under four different powers is analyzed by simulation. Four heating modes were proposed according to the structure of diversion ring, inner wall and outer wall. Two heating modes with better heating effect were obtained by comprehensively considering the factors such as magnetic field distribution, thermal power and energy consumption.

The double-wall structure of the pipe-type electromagnetic heating device can make the heat source distribution more uniform, and the use of power-frequency power supply can increase security, the installation of diversion ring can make the heating more sufficient and the heating efficiency of the two heating methods selected according to the structural performance is more than 90%.

In view of the medium or high frequency of pipe-type electromagnetic heating device, it is necessary to configure high power electronic frequency conversion drive system, and eddy current can only be produced on the tube wall, resulting in uneven distribution of heat sources. A pipe-type power-frequency electromagnetic heating device with double-wall structure was proposed.

A numerical model of the inclined open thermosyphon has been developed using a finite difference algorithm to solve the vorticity vector potential form of the Navier‐Stokes equations. The model simulates flow in an inclined cylinder whose bottom end is sealed and whose top is connected to uniform temperature reservoir, a configuration typical of evacuated tubular solar absorbers. The solution domain includes the cylinder only without the reservoir; therefore a special set of boundary conditions has been derived for the vector potential at the top end which is a flow‐through surface. Steady flow is simulated at various combinations of Rayleigh number, aspect ratio and mode of heating. An experimental set‐up has also been developed in order to investigate the development of different flow patterns previously predicted by analytical and numerical workers, as well as to observe more closely the behaviour of the fluid at the orifice. Velocity profiles were measured at the orifice using laser doppler anemometry, and compared with predictions from the numerical model.

The purpose of this paper is to describe how, in the recent attempts to stimulate alternative energy sources for heating and cooling of buildings, emphasis has been put on utilisation of the ambient energy from ground source heat pump systems (GSHPs) and other renewable energy sources.

Exploitation of renewable energy sources and particularly ground heat in buildings can significantly contribute towards reducing dependency on fossil fuels. This paper highlights the potential energy saving that could be achieved through use of ground energy source. It also focuses on the optimisation and improvement of the operation conditions of the heat cycles and performances of the direct expansion (DX) GSHP.

It is concluded that the direct expansion of GSHP are extendable to more comprehensive applications combined with the ground heat exchanger in foundation piles and the seasonal thermal energy storage from solar thermal collectors.

The paper highlights the energy problem and the possible saving that can be achieved through the use of the GSHP systems and discusses the principle of the ground source energy, varieties of GSHPs, and various developments.

This work seeks to analyze the heat transfer phenomena of anisotropic thermal conductivity fabrics containing electric conductive yarns.

A numerical program, based on a spectral element method, is used to assess the heating fabric with a temperature control model. The study determines suitable parameters for the fabric by evaluating the temperature uniformity on the fabric surface. Effective thermal conductivities of the fabric are obtained by comparing the experimental and numerical results with each other, using a nonlinear least‐square fitting method.

The results indicate that employing high effective thermal conductivity of non‐electric conductive yarns in a direction perpendicular to electric conductive yarns helps to increase temperature uniformity. However, the effect of the high effective thermal conductivity of electric conductive yarns is not evident. Adopting a short distance between the electric conductive yarns and a thick fabric is also beneficial in increasing temperature uniformity. If the heating fabric is applied in a place where there is easy energy transfer between the surface of the fabric and moving air, collocation with high heating power is needed to maintain the temperature. Choosing an appropriate heating source is essential when considering temperature uniformity and energy savings using a temperature controller.

The findings will be useful in the design of heating fabrics.

This paper describes the numerical solutions of type‐IV shock‐on‐shock interactions in hypersonic thermochemical nonequilibrium air flows around blunt bodies. The Navier‐Stokes equation solver for a chemically reacting and vibrationally relaxing gas mixture was applied to the present problem, where the concepts of the Advection Upstream Splitting Method (AUSM) and the Lower‐Upper Symmetric Gauss‐Seidel (LU‐SGS) method were basically employed along with the two‐temperature thermochemical model of Park. The aerodynamic heating with or without the shock‐on‐shock interaction to a sphere and circular cylinders are simulated for a hypersonic nonequilibrium flow. The numerical results show that typical type‐IV shock‐on‐shock interaction pattern with a supersonic jet structure is also formed in a high‐enthalpy thermochemical nonequilibrium flow, and that the contribution of convective heat flux in the translational/rotational mode to the total heat flux is dominant. Furthermore, the inherent unsteadiness of nonequilibrium type‐IV shock‐on‐shock interaction flowfield is discussed briefly.

At present, electrical heating clothing is widely used to keep ourselves warm at low temperature. The purpose of this paper is to explore the heat transfer performance of electrical heating fabric and the thermal comfort of human skin at low temperature.

The combined model of skin-electrical heating fabric system was established to simulate human skin tissue wearing electrical heating clothing. A series of simulation experiments are designed on the basis of verifying the effectiveness of the combined model. The temperature distribution inside the combined model and on the skin surface under different heating powers is simulated and analyzed. At the same time, the influence of ambient temperature on the thermal performance of electrical heating fabric was explored.

The skin model with blood vessels reflected the temperature change of human skin wearing electrical heating clothing. The higher the heating power of the electrical heating fabric was, the greater the temperature of the skin surface changed, the faster the temperature rose and the longer the time required to reach the stable state would be. After the heating element was electrified, it had the greatest effect on the average temperature of the epidermis and dermis, had smaller effect on the average temperature of subcutaneous layer and had little effect on the temperature of blood vessels. When the heating power was the same, the higher the ambient temperature was, the more obvious the heating effect of electrical heating fabric was. Electrical heating fabrics with different heating powers were suitable for different ambient temperature ranges.

A reasonable and effective evaluation method for the thermal comfort of electrical heating fabric was provided by establishing the skin model and combined model of the skin-electrical heating fabric system. It provides a reference for the design and application of electrical heating clothing.

The purpose of the paper is to investigate the effects of magnetic field on the flow driven by the combined mechanism of buoyancy and thermocapillary flow in an open enclosure with localized heating from below and symmetrical cooling from the sides.

The governing equations are discretized by the control volume method with power-law scheme and solved numerically by SIMPLE algorithm for the pressure-velocity coupling together with under-relaxation technique.

In this work, it is observed that, the average Nusselt number, decreases with an increase of Hartmann number Ha, and increases with increase of Prandtl and Grashof number. At large Marangoni number Ma, a prominent secondary eddies are observed at the top of the enclosure due to the effect of surface tension.

The study combines many external forces on thermocapillary flow.